I will code your EAs and Indicators for no charge | Page 159 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #3,161
  • Nov 25, 2013 7:58pm Nov 25, 2013 7:58pm
ok, I'll look what I can do, your atr-thingy sounds nice (but I think using the normal iATR-command would do the job also) ...
PM me with coding requests and I'll probably put you on my ignore list
  • #3,162
  • Nov 25, 2013 8:43pm Nov 25, 2013 8:43pm
Quoting fxdaytrader_
ok, I'll look what I can do, your atr-thingy sounds nice (but I think using the normal iATR-command would do the job also) ...
I actually recall why I didnt get Guru's after I just downloaded it along with the indicator again. The indicator had a parameter called "length" which is not accustomed to or part of ATR in any way, so I stepped away from using it since it seemed to change the indicator quite a bid adjusting it's value.

I got an EA I've been using but I noticed that it seems to be glitched or using the current ATR and not the previous bar's so it will actually shift around based on live data rather than "step" like the picture I posted on the previous page. It's quite a handy EA and I am trying to use its coding, to combine it with the indicator I have.

I have uploaded it for you if you are interested. If you'd be willing, and the job was done superbly to my aim, I'd be will to negotiate a "tip" with you but it would have to be what I have in mind. If not that's ok too. I'll see what you come up with. Either way, the help is already appreciated.

This EA had something I liked alot- It set a initial stop loss for you then trailed it as well based on ATR period 20/ and 2.0 multiplier (which was also the intial stop setting I used). So you could set market executions or pendings and it would put in the stop.
It had 2 modes but I only used the ATR mode. The other I wasn't really look to use or needed. Infact I been butchering it the editor trying to break it down to the bare essentials and keep what I liked and add in the indicator settings.

Its problem was, as mentioned, it seemed to move around a lot reacting to live data rather than "stepping" using the previous bar's ATR stop (you could imagine it would fluctuate quite unrationally back and forth on live volatile data. Anyway... before I blabber up a storm, if I haven't already. Here is a link to the post from which I got it if you need to read about it a little and the EA is attached here. A Russian coded it, as you'll see. The only modification I was able to do (just looked @ code for the first time this week) was I removed the sound alerts from it because man... they went ballistic. That's a separate file. This is the original.
http://www.forex-tsd.com/metatrader-...html#post68095
Attached File(s)
File Type: mq4 e-TSAtr_NRTR_Last.mq4   3 KB | 605 downloads
  • #3,163
  • Edited Nov 26, 2013 12:49am Nov 25, 2013 8:46pm | Edited Nov 26, 2013 12:49am
pls. try the attached one (no guarantee at all, use on your own risk)
make sure that you have the indicator "ATRTrailStop_v3" in your mt4/experts/indicators/-folder (because there is no errorchecking).



edit: There are some problem with the ATR-Indicator and e.g. the GOLD-pair.
It seems that the version in this post fixes the problem, pls. try: http://www.forexfactory.com/showthre...12#post7114012
Attached File(s)
File Type: mq4 AtrAndMore_SimpleOrderManager EA v1.1.mq4   68 KB | 1,337 downloads
File Type: mq4 ATRTrailStop_v3.mq4   5 KB | 1,231 downloads
PM me with coding requests and I'll probably put you on my ignore list
  • #3,164
  • Nov 25, 2013 8:52pm Nov 25, 2013 8:52pm
Damn you're fast! I'll be back shortly.
  • #3,165
  • Nov 25, 2013 8:55pm Nov 25, 2013 8:55pm
and if you open the EA with the mq4-editor and go to line 26/27, you could change this:
Inserted Code
bool SendTestBuyOrder=false;
bool SendTestSellOrder=false;
to that:

Inserted Code
extern bool SendTestBuyOrder=false;
extern bool SendTestSellOrder=false;

if "true" the EA will open the corresponding order (BuyOrder/SellOrder) at startup (with 0.01 standardlots, no tp, no sl). You could use that feature with the backtester to see what happens ...
PM me with coding requests and I'll probably put you on my ignore list
  • #3,166
  • Nov 25, 2013 10:46pm Nov 25, 2013 10:46pm
It works wonderfully! I'm still dazzled with all the other settings from the template you had. There apparently was already an ATR trailing stop setting.
Can you tell me does it work very similarly? I know this indicator is not a true ATR that I have because of the "medianprice/medianbase" options. I'll have to take a look @ the indicator's code and the ATR's equation in one of the technical analysis books, but as stated... I never coded before until taking a look @ mlq4 just this week. That was some work you did, timely too. Very much appreciated. If you do any custom work for commission let me know. Thanks again.
  • #3,167
  • Nov 25, 2013 10:58pm Nov 25, 2013 10:58pm
BTW Have you seen any issue that could be causing XAUUSD to only show long stops for this indicator? Its one of my most traded pairs.
  • #3,168
  • Nov 25, 2013 11:31pm Nov 25, 2013 11:31pm
you can search in the code for "LvlDn = 1000" (3 times in the indicator)
try to replace the 1000 with 100000 , maybe this helps.
PM me with coding requests and I'll probably put you on my ignore list
  • #3,169
  • Edited Nov 26, 2013 10:31pm Nov 25, 2013 11:52pm | Edited Nov 26, 2013 10:31pm
Quoting fxdaytrader_
no advanced error-checking, but try (martingale/grid - the road to hell) {file}
Thank you for your edit but this is not my requirement
  • #3,170
  • Nov 26, 2013 12:04am Nov 26, 2013 12:04am
Quoting Illuminated
BTW Have you seen any issue that could be causing XAUUSD to only show long stops for this indicator? Its one of my most traded pairs.
seems to work (at least at my diff. platforms).
if it does not work for some reasons, open the code and change "UseFix=true" to UseFix=false
Attached File(s)
File Type: mq4 ATRTrailStop_v3.mq4   6 KB | 1,013 downloads
PM me with coding requests and I'll probably put you on my ignore list
  • #3,171
  • Edited 12:36am Nov 26, 2013 12:10am | Edited 12:36am
Quoting FX_James
{quote} Thank you for your edit but i can not see take profit in all open trades see image i attached here for example this red lines are TP {image}
Quoting FX_James
Any coder can add "TP" in 'all open' trades in this adaptive range EA ? now TP is only enabled in last opened trade back test the default settings in visual mode to see how this EA working now Thanks in advance {file}
Maybe I misunderstood you, so pls. discard my version, no problem

btw, please do not ask me if I can do this and that for money. I do not do that (one of the reasons: I am not a proficoder) ...
PM me with coding requests and I'll probably put you on my ignore list
  • #3,172
  • Nov 26, 2013 6:14am Nov 26, 2013 6:14am
Quoting Vantage
This is a request for a trend EA.
Still hoping for some come back on my previous request for a trend EA. This would have been the result over the last few days on gbpaud. In terms of the parameters there were no losing trades in the sequence. See http://www.forexfactory.com/showthre...36#post7096536
Attached Image (click to enlarge)
Click to Enlarge Name: gbpaudh1.png Size: 41 KB
  • #3,173
  • Nov 26, 2013 6:25am Nov 26, 2013 6:25am
Quoting Vantage
{quote} Still hoping for some come back on my previous request for a trend EA. This would have been the result over the last few days on gbpaud. In terms of the parameters there were no losing trades in the sequence. See http://www.forexfactory.com/showthre...36#post7096536 {image}

And these on aud.
Attached Image (click to enlarge)
Click to Enlarge Name: audusdh1.png Size: 44 KB
  • #3,174
  • Nov 26, 2013 6:33am Nov 26, 2013 6:33am
And last but not least ej. Again no losing trades in terms of the rules.
Attached Image (click to enlarge)
Click to Enlarge Name: eurjpyh1.png Size: 38 KB
  • #3,175
  • Nov 26, 2013 6:57am Nov 26, 2013 6:57am
Hi guys, does anyone have any clues on the korharmonics indi software?
I want to call just the One2One trigger but its quite a bit over my head.

There are 3 buffers which does not tell me much, but I guess one of these will have to be called.

Inserted Code
SetIndexBuffer(0, g_ibuf_92);
SetIndexBuffer(1, g_ibuf_96);
SetIndexBuffer(2, g_ibuf_100);


The code to be used in my EA:
Inserted Code
double On2one = iCustom(NULL, 0, "KorHarmonics", 0, TrendMAPeriod, 0, 0, 1, 1, 0, 0, 0, ?, 0);

I can upload the Indi if needed. Any help and inputs is appreciated.
Attached Image (click to enlarge)
Click to Enlarge Name: eurusdm5.png Size: 86 KB
  • #3,176
  • Nov 26, 2013 9:54am Nov 26, 2013 9:54am
Quoting fxdaytrader_
{quote} seems to work (at least at my diff. platforms). if it does not work for some reasons, open the code and change "UseFix=true" to UseFix=false {file}
I downloaded the one you uploaded and on top of that I changed the 3 1000's that appear to 10000 but didnt change a thing. Indicator still works on other pairs, didnt break it, but for some ready XAUUSD still only has support for longs. Its 6 digit XXXX.XX. I tested it on an Alpari Demo to compare it to my Live broker and it works on alarpi, but they are 7 digits on gold. XXXX.XXX. I guess its no big deal. Just curious as to the cause of it....
  • #3,177
  • Nov 26, 2013 10:42am Nov 26, 2013 10:42am
no, in that one please change nothing: http://www.forexfactory.com/showthre...12#post7114012
PM me with coding requests and I'll probably put you on my ignore list
  • #3,178
  • Nov 26, 2013 11:00am Nov 26, 2013 11:00am
Must be my broker. Same thing, but the new indicator did not cause any issues anywhere so I will leave it.
On the EA: What procedures should and shouldn't be done. I've been experimenting with it today. In the backtesting it seems to have worked when it made its own stop and trailed it.
I've been setting my own stops and it hasnt been moving them candle by candle. Hasnt been moving them at all. All the settings I left unchanged except I changed the buffer to 2 pips instead of 10. Will setting my own initial stop affect this. What are the Do's and Dont's?
  • #3,179
  • Nov 26, 2013 11:07am Nov 26, 2013 11:07am
Also will checking other time frames stop it from working? Is there a limit to the amount of orders it will manage? And how many pairs?
  • #3,180
  • Nov 26, 2013 11:07am Nov 26, 2013 11:07am
not sure, I only checked it (quickly) via backtesting.

Maybe "FilterByMagicNumber" is true and you did not enter the corresponding magicnumber? Set it to false.
Then UseATRTrailStop_v3 must be true, if Atr_v3_TrailOnlyIfOrderInProfit is also true it should move the stops regardless if the order is in profit or not.

when i have the time I can check it on "real demo/live"-acc ...
PM me with coding requests and I'll probably put you on my ignore list
130 traders viewing now, 1 is registered:
Skyrider60