Disliked{quote} Isn't it because you have this EA on a broker where you only can trade mini lots? Have you tested this EA on an account that accept micro lots?Ignored
but it wont open any trades on a micro account cheers .
I will code your EAs and Indicators for no charge
{quote} still persuing, appreciate noone is obliged to do it but this is a constant winner for scalping simple trade on all signs when the alert sounds, just select number of pips for profit and stoploss edit.... M5 with 10-20 pip profit {file} {file}
no more time loss on it
- #19,003
- Edited 2:30pm May 14, 2017 2:12pm | Edited 2:30pm
- Joined Sep 2011 | Status: Trader | 1,252 Posts
I wonder if someone could make a EA basket of four pairs,
so you could pick any four pairs you wanted in the EA basket.
For instance.
EUR/USD
EUR/JPY
EUR/AUD
EUR/NZD
It would work like this, Pick 4 pairs that are synchronised. Allow it to trade automatically at any time You pick. London open New York open for instance,
The EA would automatically detect when your 4 pairs were at the top of the list In the currency meter, it would also detect the 50 moving average.
So if the moving average was above the price it would be a sell trade and below the price a buy trade,
So if you're four pairs were at the top of the list. and the 50 moving average below the price, It would place 4 X buy trades with trailing stop, Allow it to automatically close any one of the pairs . If that pairs started to go down the list. Or the moving average go against it,
It would be nice if the EA had money management break even.
Sell 4 X trades would be generated if you're four pairs were at the bottom of the list, and the moving average above the price allowing the EA to close anyone of the the pairs
Also allow it to be manually traded using three buttons (Buy button) (Sell botton) (Close button). All with the same rules as above,
I believe synchronisation is important and we will have to find the best pairs that mirror each other.
Just an idea I live in hope
you can see on picture the different currency meters, that I'm referring to
Attachment g
![Click to Enlarge
Name: 7c0f0d660f8fefe55d77707abbeba7ce[1].png
Size: 254 KB](/attachment/image/2308680/thumbnail?d=1494790121)
so you could pick any four pairs you wanted in the EA basket.
For instance.
EUR/USD
EUR/JPY
EUR/AUD
EUR/NZD
It would work like this, Pick 4 pairs that are synchronised. Allow it to trade automatically at any time You pick. London open New York open for instance,
The EA would automatically detect when your 4 pairs were at the top of the list In the currency meter, it would also detect the 50 moving average.
So if the moving average was above the price it would be a sell trade and below the price a buy trade,
So if you're four pairs were at the top of the list. and the 50 moving average below the price, It would place 4 X buy trades with trailing stop, Allow it to automatically close any one of the pairs . If that pairs started to go down the list. Or the moving average go against it,
It would be nice if the EA had money management break even.
Sell 4 X trades would be generated if you're four pairs were at the bottom of the list, and the moving average above the price allowing the EA to close anyone of the the pairs
Also allow it to be manually traded using three buttons (Buy button) (Sell botton) (Close button). All with the same rules as above,
I believe synchronisation is important and we will have to find the best pairs that mirror each other.
Just an idea I live in hope
you can see on picture the different currency meters, that I'm referring to
Attachment g
- #19,005
- May 14, 2017 6:30pm May 14, 2017 6:30pm
- Joined Feb 2012 | Status: Trader | 3,923 Posts
TSLA: 30-Dec-22 123.18 // 16-Jun-23 260.54 **111.51%**
- #19,007
- Edited 7:56pm May 14, 2017 7:04pm | Edited 7:56pm
- Joined Feb 2012 | Status: Trader | 3,923 Posts
Hi I would be very gratefull if someone could get this EA to trade microlots as its only trading minilots and standard lots at the moment, many thanks. {file}
This EA is 4500+ lines of code - too much for a quick edit and a relatively thorough checking of any code edit for all possible operations of the EA.
No time to spend hours checking and not willing to post code not checked.
You can edit mini-lots to micro-lots and see it if works - no guarantee - see directive below
- Open the EA in MataEditor, and save in a different name to preserve the original, then
- Edit -> Find and Replace -> Replace (Ctrl+h)
- Find what → 0.1
- Replace with → 0.01
- Make sure the boxes checked and unchecked are as above image.
- Click -> Find Next - to find the first instance of 0.1
- Replace or Replace All. (In this instance -> Replace All - will do, but generally better to be cautious and use -> Replace - which does one-by-one).
- Find the new named and edited EA in Navigator window (Ctrl+n).
- Test thoroughly.
- If errors are made use Ctrl+z to roll back the code to original state. Ctrl+y for inverse. (only works if the compiler has not been closed on the edit session)
TSLA: 30-Dec-22 123.18 // 16-Jun-23 260.54 **111.51%**
- #19,009
- May 14, 2017 9:43pm May 14, 2017 9:43pm
- | Joined Jan 2014 | Status: Trader | 1,147 Posts
{quote} The code is set to mini-lots. This EA is 4500+ lines of code - too much for a quick edit and a relatively thorough checking of any code edit for all possible operations of the EA. No time to spend hours checking and not willing to post code not checked. You can edit mini-lots to micro-lots and see it if works - no guarantee - see directive below Open the EA in MataEditor, and save in a different name to preserve the original, then{image}{image} Edit -> Find and Replace -> Replace (Ctrl+h) {image} Find what → 0.1 Replace with →...
- #19,010
- May 14, 2017 10:16pm May 14, 2017 10:16pm
- Joined Feb 2012 | Status: Trader | 3,923 Posts
{quote} Thankyou phylo that was very kind of you 🤝will try it out
TSLA: 30-Dec-22 123.18 // 16-Jun-23 260.54 **111.51%**
- #19,011
- Edited 10:42pm May 14, 2017 10:16pm | Edited 10:42pm
- Joined Feb 2012 | Status: Trader | 3,923 Posts
Hello, I found a clock timer indicator, which is ticks independent, in other words it runs continuously without pauses. Original location: link Could somebody, please, add the following settings to it: window, corner, hor. and vert. positions, font? Thanks in advance! {file}
- The clock counts down second by second to bar close.
- If no new bar is started the timer will count up.
- When the first new tick of the new bar comes in the timer will revert to count down (minus the last count up value).
TSLA: 30-Dec-22 123.18 // 16-Jun-23 260.54 **111.51%**
- #19,012
- May 15, 2017 1:45am May 15, 2017 1:45am
- Joined Sep 2016 | Status: --- | 1,134 Posts
{quote}{image} The clock counts down second by second to bar close. If no new bar is started the timer will count up. When the first new tick of the new bar comes in the timer will revert to count down (minus the last count up value). {file}
- #19,015
- May 15, 2017 9:07am May 15, 2017 9:07am
- Joined Sep 2006 | Status: ... | 8,112 Posts
Is there any way to call the details from the website page ??
Obviously you'd set
string google_url="https://www.dailyfx.com/gbp-usd";
Then, having returned the page content (into the variable 'result' in the above example), you could then parse it.
It looks like you're in luck, because it appears that the text 'up' or 'down' can be found directly from within the HTML:
There's possibly a more elegant way, but that would be my starting point. Looks like it would do the job.
- #19,019
- May 16, 2017 1:25am May 16, 2017 1:25am
- Joined Jul 2010 | Status: Great hopes make great men | 2,042 Posts
Hello Great Coders,
I will appreciate if someone can please help update the attached MTF version of BH Ergodic to include the Bar Diff, which calculates the difference between the current bar close and the previous bar(s) close as per attached screenshot.
Thank you, and God bless
George
I will appreciate if someone can please help update the attached MTF version of BH Ergodic to include the Bar Diff, which calculates the difference between the current bar close and the previous bar(s) close as per attached screenshot.
Thank you, and God bless
George
Low Risk Low Stress High Reward High Probability Trades
- #19,020
- May 16, 2017 2:42am May 16, 2017 2:42am
Dear All,
Will greatly appreciate if anyone can code the attached symbol changer indicator to work on renko offline charts on a single chart, so that we can change symbols with ease without opening too many charts.
Right now it only works on normal charts.
Many thanks and god bless.
Will greatly appreciate if anyone can code the attached symbol changer indicator to work on renko offline charts on a single chart, so that we can change symbols with ease without opening too many charts.
Right now it only works on normal charts.
Many thanks and god bless.
Pips Collector EA, No Martingale, No Grid