I will code your EAs and Indicators for no charge | Page 878 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #17,541
  • Jan 30, 2017 1:43pm Jan 30, 2017 1:43pm
Greetings


Please help me make these Profitable TMA EA Strategy.

Attached Image (click to enlarge)
Click to Enlarge Name: coba1nasdaq.png Size: 124 KB

Attached File(s)
File Type: mq4 TMA+CG mladen.mq4   9 KB | 896 downloads

RULES

Entry Buy: Arrow Paints Below Price (Bullish Candle). Buy Open Of Candle Following Arrow. EntryMust Open Below TMA Midpoint.
Entry Sell: Arrow Paints Above Price (Bearish Candle). Sell Open Of Candle Following Arrow. Entry Must Open Above TMA Midpoint.
(FOR ENTRY: THE TMA "BANDS DEVIATION", HalfLength, Risk %, lotsize, magic Number, Maximum_Opentrades_perSymbol, Max Spread, NEEDS TO BE CUSTOMIZABLE OR USER DEFINED).

Target For Buy: When Price close above the TMA Midpoint OR When Price Goes To The Top of TMA Band. Take Profit At Open of Bar Following Arrow Signal (Bearish Candle) Down. OR Fixed Pips

Target For Sell: When Price close below the TMA Midpoint OR Price Goes To The Bottom of TMA Band. Take Profit At Open Of Bar Following Arrow Signal (Bullish Candle)Up. OR Fixed Pips.
　
STOP LOSS: User Defind Pips OR Account %

(FOR THE EA THIS NEEDS TO BE A MAX STOP LOSS FIELD IN THE EA TO PUT A HARD STOP OR CATASTROPHIC STOP). SAY # OF PIPS OF PERCENT OF ACCOUNT VALUE THAT IS USER DEFINED.)

Filter:
ADD Hours Filters

Avoid A Buy Signal Where Price is "X" number pips (ex. 30 Pips) Or Less Below the TMA Midpoint.
Avoid A Sell Signal Where Price is "X" number Pips (ex. 30 Pips) Or Less Above the TMA Midpoint.
(FOR THE EA THIS NEEDS TO BE A USER DEFINED FIELD WHERE YOU CAN PUT "X" NUMBER PIPS)
  • #17,542
  • Jan 30, 2017 1:46pm Jan 30, 2017 1:46pm
Thank you to all the experts for helping the majority of market participants across the globe....This thread has a lot of modified indicators and Expert Advisor's that are of great assistance to all. Your contribution, time and patience is commendable.

I was thinking this would be the perfect forum for me to seek help with making changes to an EA which I have found in one of the forums here on Forex Factory.

The EA is based on Candle Color. The EA opens a buy order if the candle color is bullish and a sell order if the candle color is bearish.
If there are 5 consecutive bull candles, the EA is opening a buy order for each Bull Candle and closes these buy orders if the next candle is a Bearish candle. This is resulting in too many open orders.

Can someone help in modifying the EA to open only one order (first candle) based on the candle color and close in when the opposite color candle is formed. This will help in reducing the used margin.

Thank you very much for your valuable time and patience.
Attached File(s)
File Type: mq4 Candle Color EA.mq4   9 KB | 623 downloads
  • #17,543
  • Jan 30, 2017 2:25pm Jan 30, 2017 2:25pm
Hi! i have and EA and i need to include hedging on it, but i'm not having good results. Can you please include it to me? my EA is simple to understand, only 250 lines. please reply! i send to your email.
  • #17,544
  • Jan 30, 2017 9:22pm Jan 30, 2017 9:22pm
Hey Everyone,
I keep coming up with EA ideas until a coder thinks its worth their time. lol
Here's another one. ;-)
If it exists please let me know!

It's basically a CCI crossover EA.
One of the CCI's is coded to reflect whatever TF you are looking at. (just like CCI's do for us already)
Customizable period.
The 2nd CCI can be set to any TF.
EX: Say I'm looking at a H1 chart.
The H1 CCI is there.
But, the 2nd CCI is set to 15M.
When the H1 crosses over the 15M I want to BUY.
When the 15M crosses over the H1 I want to SELL.

Inputs:
SL, TP, TS and step.
Have the True/false option to set EA to automatically BUY and SELL on each crossover.

Here's a chart example
Thanks guys!Attachment g
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 1.0 MB
  • #17,545
  • Jan 31, 2017 1:31am Jan 31, 2017 1:31am
Quoting cja
{quote} So this means the sub-window chart now can have its own symbol, TF and ientdepth3 inputs? Correct The only condition will be the main chart should also have Quantum indicator. The Quantum indicator only needs to be in the indicator folder it does not need to be loaded on the main chart Is ientdepth3 related to lookback period or something else? It appears to be a look back at the number of bars to include in the calculations
When changed the TF on main chart to make comparisons then all the sub-windows assume main chart TF and lose their own TF.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Line chart mtf sw symbol quantum 1.png Size: 88 KB
Click to Enlarge Name: Line chart mtf sw symbo quantum loses MTF function.png Size: 93 KB
Practice makes a person perfect
  • #17,546
  • Jan 31, 2017 2:08am Jan 31, 2017 2:08am
Hi. Does any person has an indicator that can give the difference between two Average True Range values, say ATR(5) - ATR(1) and display the values for me or help me create one.
Am really busy at the moment to try my hand at coding. Preferably MT4 .
Would really appreciate it.
  • #17,547
  • Jan 31, 2017 2:37am Jan 31, 2017 2:37am
Quoting simnz
{quote} When changed the TF on main chart to make comparisons then all the sub-windows assume main chart TF and lose their own TF. {image} {image}
Then it is working exactly how an MTF indicator should work, assuming you had the M15 indicator time frames set to M15 then if you moved the main chart to M30 all the M15 indicators would become M30 and the H4 and H1 would remain showing the MTF display when you moved to H1 main chart then all the indicators except the H4 would become H1 and of course when you moved to H4 then all the indicators become H4. You have never been able to show a lower time frame on a standard buffer line based indicator while looking at a higher time frame for example you cannot observe a M15 time frame while the main chart is set to H4. I hope my explanation makes sense to you.
Trade what you see not what you hope
  • #17,548
  • Jan 31, 2017 3:21am Jan 31, 2017 3:21am
any one having the mq4 file for this indicator.. please if any one have means share with me
Attached File(s)
File Type: ex4 Aroon_Up_Down.ex4   10 KB | 516 downloads
Success is a Journey Not a Destination....... kind regards ramzam
  • #17,549
  • Jan 31, 2017 3:57am Jan 31, 2017 3:57am
Quoting ramzam
any one having the mq4 file for this indicator.. please if any one have means share with me {file}

hi ramzam,

find attached mq4 file,

- jesing
Attached File(s)
File Type: mq4 Aroon_Up_Down.mq4   4 KB | 731 downloads
Always Feel Good...
  • #17,550
  • Jan 31, 2017 4:00am Jan 31, 2017 4:00am
Quoting jesing
{quote} hi ramzam, find attached mq4 file, - jesing {file}
wow superb... thank you somuch
Success is a Journey Not a Destination....... kind regards ramzam
  • #17,551
  • Jan 31, 2017 4:36am Jan 31, 2017 4:36am
Quoting buchijohn
Greetings Please help me make these Profitable TMA EA Strategy. coba1nasdaq.png;2163584 TMA+CG mladen.mq4;2163587 RULES Entry Buy: Arrow Paints Below Price (Bullish Candle). Buy Open Of Candle Following Arrow. EntryMust Open Below TMA Midpoint. Entry Sell: Arrow Paints Above Price (Bearish Candle). Sell Open Of Candle Following Arrow. Entry Must Open Above TMA Midpoint. (FOR ENTRY: THE TMA "BANDS DEVIATION", HalfLength, Risk %, lotsize, magic Number, Maximum_Opentrades_perSymbol, Max Spread, NEEDS TO BE CUSTOMIZABLE OR USER DEFINED). Target For...
Centered TMA recalculates (repaints) - can not be used for signals or EA
  • #17,552
  • Jan 31, 2017 5:53am Jan 31, 2017 5:53am
Hi everyone. I want ask if somebody can code indicator for free. I want to have indicator that comes with an arrow if cci2 applied to close(open,...) is over 120 or below 120 and cci3 applied to close(open,...) is over 120 or below 120 at the same time (or at the close of current candle). And if it is possible to have possibilty to change the settings of these cci`s.
  • #17,553
  • Jan 31, 2017 5:55am Jan 31, 2017 5:55am
Hi coders, this is a light and fast VC indi. It already comes with a message alert. Please add an arrow in the main window to match the alert. Thanks!!!
Attached Image (click to enlarge)
Click to Enlarge Name: NVC light.PNG Size: 33 KB
Attached File(s)
File Type: mq4 NVC Light--bug fixed.mq4   6 KB | 821 downloads
  • #17,554
  • Jan 31, 2017 6:05am Jan 31, 2017 6:05am
Quoting cja
{quote} Then it is working exactly how an MTF indicator should work, assuming you had the M15 indicator time frames set to M15 then if you moved the main chart to M30 all the M15 indicators would become M30 and the H4 and H1 would remain showing the MTF display when you moved to H1 main chart then all the indicators except the H4 would become H1 and of course when you moved to H4 then all the indicators become H4. You have never been able to show a lower time frame on a standard buffer line based indicator while looking at a higher time frame for...
Thank you for the clarification.
Practice makes a person perfect
  • #17,555
  • Jan 31, 2017 6:28am Jan 31, 2017 6:28am
Hello!
Does anoyone can write an EA for me which includes:
-When open second order (the saim pair), set BE for them. (Fe. 1. order 10100. Second order 10200. Set BE on 10150).
-When third order is opened, put BE. (fe. 1. 10100, 2. 10200. 3. 10300. ----- set BE on 10200)
I will open postitons at the same size.
The first order can include fe 30 pips SL and if second order is opened (the first one is +), there is BE for this 2 positions.
I usually use iExposure indicator which is in MT4 to find BE level for my positions.
?Thanks!
  • #17,556
  • Jan 31, 2017 6:29am Jan 31, 2017 6:29am
Quoting BOedge
Hi coders, this is a light and fast VC indi. It already comes with a message alert. Please add an arrow in the main window to match the alert. Thanks!!! {image} {file}
Hey that indi looks interesting! Sorry I cant help in your coding, but can you tell me more about the indi itself?

Cheers!
Life is like a snickers, its full of nuts!
  • #17,557
  • Jan 31, 2017 7:23am Jan 31, 2017 7:23am
Hi

Does anyone have any EA that places pending orders in trend lines, based on the object name?
  • #17,558
  • Jan 31, 2017 8:44am Jan 31, 2017 8:44am
Quoting Alex798
Hello, I'm wondering if your offer is still available, if so may I ask for a simple customized horizontal line indicator? I saw a few other horizontal line indicator in this forum, but not exactly what I need for. If your offer is still available, I'm very grateful, and thank you. Here're the details: 1. 4 lines in total, line1,line2,line3,line4, what it will look like, is that from the top to bottom, line3-line1-line2-line4. 2. I would like 2 input settings for the indicator which I can adjust anytime: pips (or points I prefer) between line1 and...

Hi,

I see a lot got replied, does anyone fancy to have a go on mine, many thanks indeed!
  • #17,559
  • Jan 31, 2017 9:59am Jan 31, 2017 9:59am
Quoting alawy103
{quote} Buffer in order to use it in the EA
Here you go!
You can edit which support or resistance you want with inputs by writing name of object(line).
Attached File(s)
File Type: mq4 m_TLB_OC_v02.mq4   48 KB | 540 downloads
File Type: ex4 m_TLB_OC_v02.ex4   83 KB | 536 downloads
Know thyself
  • #17,560
  • Jan 31, 2017 11:13am Jan 31, 2017 11:13am
is this indi occupy more cpu.
it is hanging my system and freezes mt4 when i attach ... showing 25 cpu usage.. and not responding coming
Attached File(s)
File Type: ex4 Candle closes tally_v2.ex4   13 KB | 472 downloads
File Type: mq4 Candle closes tally_v2.mq4   9 KB | 560 downloads
Success is a Journey Not a Destination....... kind regards ramzam
139 traders viewing now, 3 are registered:
CwbTrader
,
Forz
,
Skyrider60