I will code your EAs and Indicators for no charge

Thanks cja! I found them once, but couldn't make them work at all. But I'll give a deeper shot one more time.

https://www.mql5.com/en/market/product/2767?p=27ht

GB

hello please i need an ea that will manage all trades and close them in the following conditions:
set a stoploss and take profits in the ea and aply to all open trades.
Again ea can be set to make partial closing and set trailing stops.
and move stop losses to break even.

There is such indicator.

HELLO CJA, LGHR and other programmers.

Could you please help me out with a small modification.

I have an operational EA BUT JUST NEEDS A very small modification.

HERE are the details:

CURRENTLY in the EA there are 3 configurations.

CONFIGURATION1 places BUY STOPS AND SELL STOPS. I make manual entry with the first TP and SL value set by me and the EA takes over as per inputs for configurations 1 in the EA if configuration 1 is selected. The EA opens sell stop/buy stop at SL hit of the manual order and carries on until TP hit or maximum inputs reached. FOR BUY order a SELL STOP and for SELL ORDER a BUY STOP.
Inputs are: [C1LOT1 and further are considered after manual entry]
C1LOT1=
C1SL1=
C1TP1=
LIKE this till 8 more.

CONFIGURATION2 places BUY STOPS AND SELL STOPS BUT with STEP [spacing between each order] as inputs for atleast 20 inputs. THAT IS the spacing I can vary for 40 inputs if needed.
Inputs are: [C2LOT1 and further are considered after manual entry]
C2LOT1=
C2SL1
C2TP1
C2STEP1
LIKE this till 20 more.

CONFIGURATION3 places BUY LIMITS AND SELL LIMITS with STEP as inputs for atleast 14 inputs.
Inputs are: [C3LOT1 and further are considered after manual entry]
C3LOT1=
C3SL1=
C3TP1=
C3STEP1=
LIKE this till 14 more.

THE following GLODBAL INPUT I use for configuration 2 which you can see in the screeshot too.

TPHITCLOSE if true,

THE EA closes all positions at any TP HIT LIVE AND any remaining pending order.

I DONT WANT IT THAT WAY.

BECAUSE each order I set has different TP value in inputs for configuration2. Some TP come before the latest pending order TP value. WHICH CREATES PROBLEM BECAUSE the EA shuts down at the previous TP values .
SO I want: WHENEVER THE LATEST PENDING ORDER IS HIT, CONVERT/MODIFY ALL ORDERS TP TO THE TP VALUE OF THE LATEST PENDING ORDER.
THEN if next pending order hit do the same for all until the TP is hit and then close all live and pending order once the TP is hit.

THATS it.

IF its clear, I send you the EA to modify it.

SO can you do it?

Awaiting your reply.

Thank you

Hello Coders,

I am in need of your help to code an scalper EA for period M1 for the below entry and exit criterias ( template attached for MACD/Ichimoku & williams % settings to be used)

Entry conditions are as below for buy and sell . For exit criteria if a buy order is open and sell entry occurs ->exit and vice versa....

buy entry
Ichimoku delay line is greater than the MA
W%R is greater than 50 level
MACD > Signal line
macd && signal lines are both above 0 level


sell entry :
Delay line is smaller than the MA line
W%R is smaller than the 50 level line
MACD < Signal line
macd && signal lines are both below 0 level

Here, try

Please, can some help me with this indicator. When in backtest, indicator does not update lines on new day.
Any help will be appreciated.
Thanks.

Here, try

Thanks, I tried, but same results.

[Цитата = gbudy; 9335923]. Спасибо, я пытался, но такие же результаты [/ цитата]
so, try
( так, попробуй)

Can anyone make this indicator showing not only 4 news but 7 please?

Hello AlanG,
Thanks again, but I still have errors
2016.12.10 14:06:31 2016.10.06 02:30 Custom indicator Polo (1) USDJPY,H1: loaded successfully
2016.12.10 14:06:33 2016.10.06 02:45 Cannot call 'user32.dll::RegisterWindowMessageA', DLL is not allowed
2016.12.10 14:06:33 2016.10.06 02:45 Polo (1) USDJPY,H1: unresolved import function call

http://www.forexfactory.com/attachme...7&d=1481391138

Your working file, all updated in at least testere
(Ваш файл рабочий, все обновляется по крайней мере в тестере)
So I do not understand you correctly, you could have the picture show
(Так что я не правильно вас понял, могли бы вы на картинке показать)

Thanks, AlanG, I did a 2 month backtest and the lines are not updating on new day. It will update if I stop the backtest and reset the indicator on chart.
See picture below.

What settings at you?(Какие у вас настройки?)
time frame?

1 Hr tf. Default settings.

Test this

hi can anyone help to code me an EA with this parameter? i believe this is a very good EA if it could be produced.