I will code your EAs and Indicators for no charge | Page 689 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #13,761
  • May 31, 2016 1:36am May 31, 2016 1:36am
Quoting keydcuk
{quote} The link that you post has an ex4 file. If you want an EA, you need to provide an mq4 file so that I can access the buffers to trigger the trade signals. Daniel
HI keydcuk ....

Here is quantumits MQ4 file ....

please read ...what we are talk about this indicator ..final ...CYBER1 create alert indicator..

Thanks

http://www.forexfactory.com/showthread.php?p=8926962
  • #13,762
  • May 31, 2016 4:00am May 31, 2016 4:00am
Quoting kalawe
{quote} Try this... {file}
Thank you Kalawe ..... It is very useful ... I need to some changes like the parameters as follows :

1. MOVING AVERAGE 1 PERIOD (Example : 14)
2. MOVING AVERAGE 1 METHOD (Example : Simple)
3. MOVING AVERAGE 1 APPLY TO (Example : High)
4. MOVING AVERAGE 2 PERIOD (Example : 14)
5. MOVING AVERAGE 2 METHOD (Example : Simple)
6. MOVING AVERAGE 2 APPLY TO (Example : Low)
7. TAKE PROFIT
8. STOP LOSS
9. TRAILING STOP

Other conditions are same as my previous post.

If you make the changes it is very useful.

Thanks in advance.
  • #13,763
  • May 31, 2016 5:31am May 31, 2016 5:31am
Quoting Tilltheend
{quote} Hey Daniel, I have reduced number of buffers to only 2. For S1 and R1; I also have wrote pin bar code in file itself. You need not search pin bar code separately. PFA modified indicator. Can you pls help with EA? Thanks {file} {file}
There was no need to just have 2 buffers, I am quite happy to work with more S/Rs. I just couldn't figure out which of the 19 buffers was supports and resistances.

I'll have a look. If I need to access the code to find pinbars, I won't be able to do it this way. I just program in GUI software. I am not a coder, I am a programmer.

I might have to look to see if I can find a better pinbar indicator.

Daniel
  • #13,764
  • May 31, 2016 6:31am May 31, 2016 6:31am
Quoting keydcuk
{quote} There was no need to just have 2 buffers, I am quite happy to work with more S/Rs. I just couldn't figure out which of the 19 buffers was supports and resistances. I'll have a look. If I need to access the code to find pinbars, I won't be able to do it this way. I just program in GUI software. I am not a coder, I am a programmer. I might have to look to see if I can find a better pinbar indicator. Daniel
Right, 2 problems even though I got the EA to do what it is meant to do.

1. Still the problem of a proper pinbar indicator. I see pinbars in backtest that are not being identified.
2. You originally said that you wanted your TP to be 2:1. This I am going to have to work on.

The good news is that if you want me to use the original indicator and use all the S/Rs, I should be alright with this regardless of knowing the buffers so long as you understand that if I don't know which buffer is which, the pinbar is the trigger on any S/R meaning that if there is a bear pinbar on a support level it would sell and if there is a bull pinbar on a resistance level it would buy.

If anybody thinks they have a GREAT pinbar indicator, please share in mq4 format.

Many Thanks & Best Regards,

Daniel
Attached File(s)
File Type: mq4 candle_patterns.mq4   29 KB | 565 downloads
File Type: ex4 Pinbar Machine.ex4   240 KB | 561 downloads
  • #13,765
  • May 31, 2016 6:41am May 31, 2016 6:41am
Anybody know where I can find this kind of Ea
All sesions Break out ea with ts.

eurusd pictures.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 1.png Size: 47 KB
Click to Enlarge Name: Screenshot_1.png Size: 57 KB
  • #13,766
  • May 31, 2016 7:26am May 31, 2016 7:26am
Quoting keydcuk
{quote} Right, 2 problems even though I got the EA to do what it is meant to do. 1. Still the problem of a proper pinbar indicator. I see pinbars in backtest that are not being identified. 2. You originally said that you wanted your TP to be 2:1. This I am going to have to work on. The good news is that if you want me to use the original indicator and use all the S/Rs, I should be alright with this regardless of knowing the buffers so long as you understand that if I don't know which buffer is which, the pinbar is the trigger on any S/R meaning...
in my opinion is working with pinbars very difficult because for example a pin in m15 is a normal looking reversal in m1 or so. Anyway i attached to indy where you can select the TF, hope that helps
Attached File(s)
File Type: mq4 Pin bar.mq4   51 KB | 543 downloads
Attached File(s)
File Type: mq4 mikko_pinbar.mq4   3 KB | 534 downloads
(.)(.) think first ...
  • #13,767
  • May 31, 2016 7:32am May 31, 2016 7:32am
Quoting maximumguita
{quote} in my opinion is working with pinbars very difficult because for example a pin in m15 is a normal looking reversal in m1 or so. Anyway i attached to indy where you can select the TF, hope that helps {file}{file}
Thanks for trying to help. The Pin Bar indi doesn't work. I am guessing it is an old indicator that doesn't work on later versions of MT4. The mikko one is no good either as it is worse than the others I have seen.

Thanks anyway.

Daniel
  • #13,768
  • May 31, 2016 7:40am May 31, 2016 7:40am
Hello Great Coders, pls help to adjust the alert of this indicator, to only alert once when the arrow appears and also help to include the pair symbols in the message.

Thanks in advance.
Attached File(s)
File Type: mq4 2xMA.mq4   5 KB | 477 downloads
  • #13,769
  • May 31, 2016 7:45am May 31, 2016 7:45am
Quoting keydcuk
{quote} Thanks for trying to help. The Pin Bar indi doesn't work. I am guessing it is an old indicator that doesn't work on later versions of MT4. The mikko one is no good either as it is worse than the others I have seen. Thanks anyway. Daniel
sorry for the pin bar indy, i compiled it and thought maybe the changes are saved in the mq file too :-(
(.)(.) think first ...
  • #13,770
  • May 31, 2016 8:06am May 31, 2016 8:06am
Quoting keydcuk
{quote} Right, 2 problems even though I got the EA to do what it is meant to do. 1. Still the problem of a proper pinbar indicator. I see pinbars in backtest that are not being identified. 2. You originally said that you wanted your TP to be 2:1. This I am going to have to work on. The good news is that if you want me to use the original indicator and use all the S/Rs, I should be alright with this regardless of knowing the buffers so long as you understand that if I don't know which buffer is which, the pinbar is the trigger on any S/R meaning...
Hi Daniel,
Thanks for the efforts. Yeah, I don't need to know which buffer is which.
I am even fine with any basic pin bar code. Or you can just replace pin bar with a simple Bullish candle for Buy signal and Bearish candle for Sell signal and send across EA.

What I need is, a basic working EA which will trigger trades based on pivot points (entry, TP 2:1, SL etc).....I am struggling with this part.
I shall fill candle pattern logic in it myself.

If you have done this, can you please share EA code with me......

Thanks

Thanks again.
  • #13,771
  • May 31, 2016 8:10am May 31, 2016 8:10am
Quoting emmy4
Hello Great Coders, pls help to adjust the alert of this indicator, to only alert once when the arrow appears and also help to include the pair symbols in the message. Thanks in advance.{file}
Try this, it should only alert when there is a cross at the bar close
Attached File(s)
File Type: mq4 2xMA_mod_alert.mq4   5 KB | 712 downloads
Please Do Not PM Me With Coding Enquiries
  • #13,772
  • May 31, 2016 8:48am May 31, 2016 8:48am
Quoting Gumrai
{quote} Try this, it should only alert when there is a cross at the bar close {file}
Thanks Gumrai, for the quick response. Pls is it possible of having an option of alerting on current bar?

Thanks in advance
  • #13,773
  • May 31, 2016 9:03am May 31, 2016 9:03am
Quoting emmy4
{quote} Thanks Gumrai, for the quick response. Pls is it possible of having an option of alerting on current bar? Thanks in advance
This should do
Attached File(s)
File Type: mq4 2xMA_mod_alert_current_bar.mq4   5 KB | 793 downloads
Please Do Not PM Me With Coding Enquiries
  • #13,774
  • May 31, 2016 9:26am May 31, 2016 9:26am
Quoting Gumrai
{quote} This should do {file}
Thanks once again, i am very grateful.
  • #13,775
  • May 31, 2016 9:36am May 31, 2016 9:36am
Quoting Tilltheend
{quote} Hi Daniel, Thanks for the efforts. Yeah, I don't need to know which buffer is which. I am even fine with any basic pin bar code. Or you can just replace pin bar with a simple Bullish candle for Buy signal and Bearish candle for Sell signal and send across EA. What I need is, a basic working EA which will trigger trades based on pivot points (entry, TP 2:1, SL etc).....I am struggling with this part. I shall fill candle pattern logic in it myself. If you have done this, can you please share EA code with me...... Thanks Thanks again.
I am not a coder. I use program with fxdreema. I am quite happy to share the mq4 file but you will find that it uses a lot of template stuff and I have had comment from a coder that it is not understandable.

It trades the S/R on pinbars defined by the indicator I attached. The only thing I could not get it to do is trade your ratio 2:1 but left a TP input for your discretion.

Best Regards,

Daniel
Attached File(s)
File Type: mq4 Pinbar Machine.mq4   442 KB | 688 downloads
File Type: mq4 candle_patterns.mq4   29 KB | 641 downloads
  • #13,776
  • May 31, 2016 10:12am May 31, 2016 10:12am
Quoting keydcuk
{quote} I am not a coder. I use program with fxdreema. I am quite happy to share the mq4 file but you will find that it uses a lot of template stuff and I have had comment from a coder that it is not understandable. It trades the S/R on pinbars defined by the indicator I attached. The only thing I could not get it to do is trade your ratio 2:1 but left a TP input for your discretion. Best Regards, Daniel {file} {file}
Yeah, 7000+ lines of code in EA is giving me goosebumps....
I shall try to filter portion that is useful for me.
Thanks for help.

Cheers.
  • #13,777
  • May 31, 2016 10:20am May 31, 2016 10:20am
is there any way to put a sticky note on the chart while trading?, some times i lose focus and enter a trade with out fully following the rules
  • #13,778
  • May 31, 2016 1:31pm May 31, 2016 1:31pm
Quoting keydcuk
{quote} I am not a coder. I use program with fxdreema. I am quite happy to share the mq4 file but you will find that it uses a lot of template stuff and I have had comment from a coder that it is not understandable. It trades the S/R on pinbars defined by the indicator I attached. The only thing I could not get it to do is trade your ratio 2:1 but left a TP input for your discretion. Best Regards, Daniel {file} {file}
Hi Daniel,
EA does not use pivot lines to trigger trades. Candles wherein trades are triggered are far off from pivot levels.

@Cja/ Gumrai/ other experienced coders , can someone who has hands on knowledge of mql code, pls. help here.....

EA from abv post gets values from pivots indicator thru iCustom.....but it seems only values of current day pivots are used in EA; historical pivot values are not being accessed. Hence trading condition is not being met. (Pin bar Candle which crosses pivot lines, shud be used as trigger for trade)

Can you tell how can past values for pivots from indicator be accessed thru iCustom? Without this I am not able to do proper backtesting.

Any help would be appreciated.

Thanks.
  • #13,779
  • May 31, 2016 2:46pm May 31, 2016 2:46pm
Hello friends, we are stuck need a good coder to help us on this thread
http://www.forexfactory.com/showthre...51#post8955151

if u can take a look thanks
  • #13,780
  • May 31, 2016 3:04pm May 31, 2016 3:04pm
Quoting kalawe
{quote} Try this... {file}
Dear Kalawe Sir ... I am waiting for your reply .....

Thank you Kalawe ..... It is very useful ... I need to some changes like the parameters as follows :

1. MOVING AVERAGE 1 PERIOD (Example : 14)
2. MOVING AVERAGE 1 METHOD (Example : Simple)
3. MOVING AVERAGE 1 APPLY TO (Example : High)
4. MOVING AVERAGE 2 PERIOD (Example : 14)
5. MOVING AVERAGE 2 METHOD (Example : Simple)
6. MOVING AVERAGE 2 APPLY TO (Example : Low)
7. TAKE PROFIT
8. STOP LOSS
9. TRAILING STOP

Other conditions are same as my previous post.

If you make the changes it is very useful.

Thanks in advance.
154 traders viewing now, 1 is registered:
ales71