I will code your EAs and Indicators for no charge | Page 638 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #12,741
  • Apr 8, 2016 3:29pm Apr 8, 2016 3:29pm
Hi,

Can you code for me very simple indicator that has only one function, sending sms when balance is over certain amount of currency? For example initial balance equals $10000 and I want to get sms when balance reaches $15000.

Best regards!
  • #12,742
  • Apr 8, 2016 4:03pm Apr 8, 2016 4:03pm
Quoting billsmith
{quote} can anyone help me
Here it is.
Attached File(s)
File Type: mq4 Mult_ATR_Display.mq4   23 KB | 633 downloads
  • #12,743
  • Apr 8, 2016 4:34pm Apr 8, 2016 4:34pm
Hi all
Would anyone know if it is possible to code the attached indicator
to allow it to be placed to " Previous Indicator Data" same as in the normal moving average indicators.
Thank you.
Attached File(s)
File Type: ex4 MA_in_Color 2.ex4   12 KB | 545 downloads
Attached File(s)
File Type: mq4 MA_in_Color 2.mq4   4 KB | 552 downloads
  • #12,744
  • Apr 8, 2016 6:35pm Apr 8, 2016 6:35pm
Hello all..I have an indicator attached below from which I get very good entries many times. To that point it makes good profits on specific time schedules and not on all pairs. Also the parameters inside plays a huge role to have it optimized as much as possible. Of course the award is different on different time frames as well.
So below is the picture of the indi and attached too. I am sure many of you are aware of this indi. It has many versions too in the forums. I found this one the better suitable for me.
1. I need it coded as an EA. An option that I can let it work on " Use a session time" . if possible with 2 sessions separated
2. An option to " close all trades after session (s) "
3. Have an option to close the trade on opposite signal and open the new trade on next bar. (IF NOT TP OR SL hit)
4. Entry options like on first bar start or on close of the first bar. ( close will confirm, but I would like see the performance also if on the same bar, so twice options)
5. Tp and Sl levels on pips if possible, if not in dollars would be also much great . A TS would be even a great function as well
5. On the screenshot I have marked where I would like to have the entry ( my main idea )
6. The parameters inside the indi has to be as it is on default and not deleted surely. They are effecting the trade signals of the bars, it comes out from all parameters inside.
7. I know it is maybe to much I wanted , but I can't do it myself, .. I do not have the talent earned, so simple.
8. If this one will help me to trade as I wish, I will not forget to help as well as much much more..
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 83 KB
Attached File(s)
File Type: mq4 RSIOMA_v3_alerts.mq4   13 KB | 740 downloads


Thanks so much, who can ever give me a hand...
Best Regards,
" Accepting losses is the most important single investment devise "
  • #12,745
  • Edited 9:33pm Apr 8, 2016 8:03pm | Edited 9:33pm
Hi,
I am trying to find an easy Indicator that plots an arrow at the beginning of each new week with the first incoming tick over the beginning Candle..
Anyone know of such an Indicator?
I have found an indicator that plots the day (as text) under the Candle.
What I need is an "arrow" instead of the text showing th arrow just with the first tick of the new week.
I appreciate any help.
Thanks for your help.
Regards Zack
Attached File(s)
File Type: ex4 weekly-days.ex4   5 KB | 483 downloads
  • #12,746
  • Edited 10:31pm Apr 8, 2016 9:29pm | Edited 10:31pm
Hey
i need AO alert on crossovers and be 4 colored
i have these two Vr,s but neither has both capability together ~

can anyone add a crossover alert to this with adjustability for on/off ?
Attached File(s)
File Type: mq4 Awesome 4 color v nmc.mq4   4 KB | 571 downloads


or maybe make this one 4 colored just like the other one, if its easier this way..
Attached File(s)
File Type: mq4 Awesome_Signal_Alert.mq4   4 KB | 730 downloads


tnx
  • #12,747
  • Apr 8, 2016 10:07pm Apr 8, 2016 10:07pm
Quoting zackery
Hi, I am trying to find an easy Indicator that plots an arrow at the beginning of each new week with the first incoming tick over the beginning Candle.. Anyone know of such an Indicator? I have found an indicator that plots the day (as text) under the Candle. What I need is an "arrow" instead of the text showing th arrow just with the first tick of the new week. I appreciate any help. Thanks for your help. Regards Zack {file}
Hello,
Try this. If the week on your broker starts on a Sunday, just change the day.
You will probably have to play around with the offset so that the arrow doesn't partially cover the bar.
Attached File(s)
File Type: mq4 Week Arrow.mq4   3 KB | 817 downloads
Please Do Not PM Me With Coding Enquiries
  • #12,748
  • Apr 8, 2016 11:51pm Apr 8, 2016 11:51pm
Hi

Can any one please help me with this indicator as i need the indicator to perform the same but with the DAILY and not WEEKLY.
Attached File(s)
File Type: ex4 WeeklyPivotOnly.ex4   12 KB | 510 downloads
  • #12,749
  • Apr 9, 2016 1:00am Apr 9, 2016 1:00am
This thread has always impressed me.
One trader started it on 3rd May , 2009 . Even though the starter only made 5 posts and was last online on 23rd June, 2009 , this thread is still running with the good intentions of good people willing to help people free of cost.
Hats of to the starter Metatrader and hats off to all the good people here.
Attached Image (click to enlarge)
Click to Enlarge Name: MetaTrader Profile.jpg Size: 124 KB
When the going gets tough , the tough get going
  • #12,750
  • Apr 9, 2016 1:36am Apr 9, 2016 1:36am
Quoting Gumrai
{quote} That script cannot write History pool details, another script or expert must be over-writing the file. Maybe change int handle=FileOpen("OrdersReport.csv",FILE_WRITE|FILE_CSV,"\t"); to int handle=FileOpen("OpenOrdersReport.csv",FILE_WRITE|FILE_CSV,"\t"); or some other file name
thanks alot to help me.
I tried to modify overlay-chart.mq4, so that to run it in subwindow. I can run the Candles in Subwindow, but Grid lines are plotted in Main Window.
I attached the Original and modified File with a Chart Picture.
Attached Image (click to enlarge)
Click to Enlarge Name: GER30M1.png Size: 47 KB
Attached File(s)
File Type: mq4 modified.mq4   9 KB | 507 downloads
File Type: mq4 Original.mq4   9 KB | 529 downloads
  • #12,751
  • Edited 1:46am Apr 9, 2016 1:42am | Edited 1:46am
Quoting prku018
Hi Can any one please help me with this indicator as i need the indicator to perform the same but with the DAILY and not WEEKLY.{file}
i found this indicator
Attached File(s)
File Type: ex4 Daily Pivot.ex4   144 KB | 544 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: aaaaaaaaaz.png Size: 21 KB
  • #12,752
  • Apr 9, 2016 4:27am Apr 9, 2016 4:27am
Quoting bah12ram
{quote} thanks alot to help me. I tried to modify overlay-chart.mq4, so that to run it in subwindow. I can run the Candles in Subwindow, but Grid lines are plotted in Main Window. I attached the Original and modified File with a Chart Picture. {file} {file} {image}
Hello, I don't know if I can help you much
You can try
//Draw Objects

window = WindowFind(WindowExpertName());
ObjectCreate( Prefix + "Copyright", OBJ_LABEL, window, 0, 0 );

and replace the relevant 0 in all the ObjectCreates to window
Please Do Not PM Me With Coding Enquiries
  • #12,753
  • Apr 9, 2016 4:41am Apr 9, 2016 4:41am
Quoting Retlaw
{quote} You could work with a flag for the hedge order, something like HedgeOrderOpen = true. Now as soon as there are no more open orders you then set that flag back to false.
Thank you very much. I will give it a try. The problem is, however, not with the hedge order. As per the results I posted (post#12,736 previous page), it is when the hedge order get stopped out while the original order is still open,that a second hedge opens. I think what you are suggesting to me is that the flag needs to be on the Original order. Something like buy_ticket=true then don't open anymore hedges.
  • #12,754
  • Apr 9, 2016 5:04am Apr 9, 2016 5:04am
Quoting lukeb
{quote} Here it is. {file}

Hey Luke ( or anyone )..Is there any chance you could convert this slightly ..

would it possible to divide the top ATR reading by the middle ATR reading... and have the result as the bottom ATR reading ?
currently, I can only use 2 digit numbers in the top and middle ATR inputs, can we change that so 3 digit numbers can also be used ?

it would be greatly appreciated..thanks for your time.

Ja

Attached File(s)
File Type: mq4 Mult_ATR_Display.mq4   23 KB | 589 downloads
Memories caught in time but never forgotten
  • #12,755
  • Apr 9, 2016 5:48am Apr 9, 2016 5:48am
Quoting Binary3000
{quote} Thank you very much. I will give it a try. The problem is, however, not with the hedge order. As per the results I posted (post#12,736 previous page), it is when the hedge order get stopped out while the original order is still open,that a second hedge opens. I think what you are suggesting to me is that the flag needs to be on the Original order. Something like buy_ticket=true then don't open anymore hedges.
What I mean is that you set the flag whenever the hedge order is opened and set it back to false only when there are no more open positions.
If(OrdersTotal() == 0) HedgeOrderOpen = false;
  • #12,756
  • Apr 9, 2016 7:26am Apr 9, 2016 7:26am
Quoting ionone
{quote} are you talking about Ichimoku.mq4 ? i posted another post with the indicator earlier here it is again {file} i agree that i didn't put SL and TP in "extern" but it's just a draft. could you make it work in tick mode? it would be an amazing EA! thanks a lot! Jeff
Now it just is a tick mode, because before 'if (TimeMinute(Time[0]) != prevtm)' ,there is '//'. Now you can delete '//if (TimeMinute(Time[0]) != prevtm)' and
'prevtm = TimeMinute(Time[0]);'.
  • #12,757
  • Edited 8:46am Apr 9, 2016 7:55am | Edited 8:46am
Quoting Gumrai
{quote} Hello, I don't know if I can help you much You can try //Draw Objects window = WindowFind(WindowExpertName()); ObjectCreate( Prefix + "Copyright", OBJ_LABEL, window, 0, 0 ); and replace the relevant 0 in all the ObjectCreates to window
very kind of you, thanks a lot . I have changed ObjectCreate( Prefix + "Copyright", OBJ_LABEL, window, 0, 0 ); but "WindowFind(WindowExpertName());" I get nothing only with "window = WindowFind(UniqueID)"; I get the copy Right and Status in subwindow but not the grid.
I have attached new modified File and a picture of new Chart.
Sorry I have changed the modified File please Download again.
Attached Image (click to enlarge)
Click to Enlarge Name: GER30M2.png Size: 47 KB
Attached File(s)
File Type: mq4 modified1.mq4   9 KB | 529 downloads
  • #12,758
  • Apr 9, 2016 9:26am Apr 9, 2016 9:26am
Hello,
I need an indicator for meta trader 4 which can catch the angles between two candles from EMA I am using Period 5 with 3 EMAs High Low and Median HL/2
Please help me I think there is some tricks of angles I need backtest and forward test based on this indicator It is difficult to do so by hand would be better easy and effective with this indicator thanks for helping
Below I have illustrated the idea of the indicator I want.
  • #12,759
  • Apr 9, 2016 9:51am Apr 9, 2016 9:51am
Quoting lghr
{quote} Your ea is not full, can't modify.
The EA is complete but the stop loss is too tight, make it 0.5 %, it will be 500 point on EURUSD, in place of 0.01% which is only 11 points.

The backtest give nothing good. Lot are 1 Lot. EURUSD 1H.
Attached Image (click to enlarge)
Click to Enlarge Name: Image1.png Size: 308 KB
  • #12,760
  • Apr 9, 2016 10:20am Apr 9, 2016 10:20am
this is lot of difference in what i have posted it just draws a line like a moving average and you please edit the weekly pivot to daily am not a coder and i think it will help many others also please
136 traders viewing now, 2 are registered:
Forz
,
Skyrider60