I will code your EAs and Indicators for no charge | Page 470 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #9,381
  • Sep 17, 2015 8:30am Sep 17, 2015 8:30am
Hey guys, I was hoping for an calculator like the one in the pic. Can anyone please point me in the right direction?
Attached Image
  • #9,382
  • Sep 17, 2015 9:21am Sep 17, 2015 9:21am
here's my tickscalper that i had put much effort in , theoretically i could see it works, practically can your guys help to find out?
EU 1M.... pls do backtest or try in demo first.. & do give some feedback..
Attached File(s)
File Type: mq4 R13d.mq4   52 KB | 629 downloads
  • #9,383
  • Sep 17, 2015 11:46am Sep 17, 2015 11:46am
Hi Everyone

While I'm not new to trading, I am new to programming. I would like to learn, but I'm stuck. Even though I am reading the MQL4 book, I have been struggling for 3 weeks now to create a relatively simple EA, and I realized that it is time to ask for help. Will you please help me with this. I would like the EA to work like this:

1. Open a buy trade if (Close[0]>Close[1]) and open a sell trade if (Close[0]<Close[1])
2. Not open any new trades if there are already trades in progress for the same pair
3. If the trade hits a certain profit in dollars (this should be adjustable through an extern double), the trade must be closed
4. If the trade goes the wrong way, it should open a hedging trade in the opposite way and also martingale this trade
5. The multiplier of the lot size should be adjustable and the hedge in pips should be adjustable
6. It should then continue to hedge and martingale the trades in opposite directions each time the hedge in pips is hit, or close all open trades once the original profit target is hit, or the max amount of trades have been made. The latter should be adjustable (1-20)
7. None of the trades should be closed once the hedging sequence starts
8. The original lot size should be adjustable, and this should be multiplied as per step 5 above.
9. There should also be some kind of alert that indicates when a trade is made

For example 1st scenario: A buy order is made and the price goes up. The adjustable profit target of say $5 is hit and the trade is closed.
2nd scenario: A sell order is made with 0.01 lots but the price goes up. It goes up by 20 pips (adjustable hedge), and a buy order is made with 0.03 lots (multiplier 3), The trend changes again and the price falls before the profit margin on these two combined open trades hits $5. The price falls by 20 pips again and another sell order is made. This scenario can can potentially either end when the profit target is hit, or once 5 trades have been made and the trades are closed. In this case there is still a chance that the overall profit was between $0-$5, or some were winners some losers or all were losers.

The attached EA is the closest that I could find, but it does not open trades automatically and I do not have access to the source code. If you can code the EA to operate similarly, and add my custom open buy-sell entry points, I would be very much obliged and extremely thankful.

Thank you
Gary
Attached File(s)
File Type: ex4 pips_counter10.ex4   48 KB | 507 downloads
  • #9,384
  • Sep 17, 2015 2:06pm Sep 17, 2015 2:06pm
(sorry for my poor english)
hi everyone
is there possible that EA or indicator can set buy stop and sell stop order +20 and -20 pips above and below the price 10 seconds before news release? with tp +15 and s/l -10?
like this guy in video?
Inserted Video
And falling's just another way to fly...
  • #9,385
  • Sep 17, 2015 2:45pm Sep 17, 2015 2:45pm
Hi, I really appreciate if any of the fabulous Coders here could have a closer look to 1 existing indicator and 1 idea:
-I am trying to find an Indicator which draws an arrow if: - 2 consecutive Candles make the LowestLow (LL) within 2 pips and - 2 consecutive Candles make the HighestHigh (HH) within 2 pips .
-And the Indicator PPZ.mq4 would be helpful if it could be show the next 2 Higher Timeframes in the Chart:
Example=Trading the D1(daily)-TF-Chart = Indicator show up the W1 (weekly) -TF and the MN (monthly) -TF in the D1-Chart.
Thanks again for your attention.
Would be great if a Coder would have a closer look at these 2 mentioned above (1 indi and 1 idea)?
Attached is the Indi.
Regards Zack
Attached File(s)
File Type: ex4 PPZ.ex4   6 KB | 500 downloads
File Type: mq4 PPZ.mq4   8 KB | 515 downloads
  • #9,386
  • Sep 17, 2015 6:29pm Sep 17, 2015 6:29pm
Hello ,

Can someone please help me with this close EA. If I apply to close all and I have a large number of trades open(over 10)
it does not close all of them. Other times it closes 7 other times 6....so it leaves always some open.
Would someone be kind enough to fix it so it wont leave any trades open when we have to close all.

Thank you
4x
Attached File(s)
File Type: mq4 close5profit.mq4   9 KB | 524 downloads
File Type: ex4 close5profit.ex4   24 KB | 478 downloads
  • #9,387
  • Sep 17, 2015 8:29pm Sep 17, 2015 8:29pm
Quoting 4xPIPAHOLIC
Hello , Can someone please help me with this close EA. If I apply to close all and I have a large number of trades open(over 10) it does not close all of them. Other times it closes 7 other times 6....so it leaves always some open. Would someone be kind enough to fix it so it wont leave any trades open when we have to close all. Thank you 4x {file} {file}

Sometimes when an internet connection is not good enough, can interfere your EA's performance ....
I have not tried your EA.... but "no warning" again ... ( I'll try to fix it )

what if you tried
http://www.forexfactory.com/showthre...27#post8438227
Attached File(s)
File Type: mq4 close5profit.mq4   9 KB | 491 downloads
  • #9,388
  • Sep 17, 2015 8:35pm Sep 17, 2015 8:35pm
[quote=cale01b3;8493771]
Quoting Ramaparasu
{quote} Thanks Very much

never mind...... i was just kidding
  • #9,389
  • Sep 17, 2015 9:06pm Sep 17, 2015 9:06pm
Quoting Ramaparasu
{quote} Sometimes when an internet connection is not good enough, can interfere your EA's performance .... I have not tried your EA.... but "no warning" again ... ( I'll try to fix it ) what if you tried http://www.forexfactory.com/showthre...27#post8438227 {file}
Thanks a lot Ramaparasu, will try that one also

4x
  • #9,390
  • Sep 17, 2015 9:55pm Sep 17, 2015 9:55pm
I am trying to use the TCCI indicator for an EA in a cross; however, the buffer value is 11 pips different from the position of the indicator on the chart. The data window gives the correct value but not the buffer. Please, help on this matter.
Attached File(s)
File Type: mq4 TCCI.mq4   5 KB | 572 downloads
  • #9,391
  • Sep 18, 2015 2:53am Sep 18, 2015 2:53am
Quoting wolf300
Hey Lesso and all the other pro-coders, could you please have a look at this indi again. Arrows do not always appear when conditions are fulfilled. Especially not when price goes back into trend again, what would be the ideal setup. I am sure it is just a little thing to change, to get ALL arrows. To see what I mean (Strategy) you can check out the thread RSI & CCI system. I am using rsi 5 set to close, crossing 50 level up or down and cci 10 set to close, crossing 0 level. {file}

Hmmmh..... no one of the coders seems to be interested in this easy and profitable indi (strategy) to make sure every arrow appears and add a message alert.

Lesso does not react to PM`s for weeks, even I "paid" for this indi with another indi I paid money for (fair is fair).

So please, one of the successful coders, could you have a look at this indi to make it work stable and add a message alert to it. That would be realy nice because many traders would get a realy good indi on the chart without a subwindow of something cluttering the chart. Have a look at this example please.
Attached Image (click to enlarge)
Click to Enlarge Name: HMA.png Size: 34 KB


Settings are: rsi 8, crossing level 50 and cci 14 crossing level 0

Missing is: Message alert and (many times) arrows will not appear even conditions are fulfilled.
  • #9,392
  • Sep 18, 2015 2:57am Sep 18, 2015 2:57am
Here is the indi again.

Attached File(s)
File Type: mq4 XxRSI+CCIxX.mq4   5 KB | 638 downloads
  • #9,393
  • Sep 18, 2015 4:22am Sep 18, 2015 4:22am
Quoting wolf300
{quote} Hmmmh..... no one of the coders seems to be interested in this easy and profitable indi (strategy) to make sure every arrow appears and add a message alert. Lesso does not react to PM`s for weeks, even I "paid" for this indi with another indi I paid money for (fair is fair). So please, one of the successful coders, could you have a look at this indi to make it work stable and add a message alert to it. That would be realy nice because many traders would get a realy good indi on the chart without a subwindow of something cluttering the chart....
( example using long logic )
The main issue is the logic for the arrow, the arrow code is set for
RSI[0]>rsilevel && RSI[1]<rsilevel && CCI[0]>ccilevel && CCI[1]<ccilevel
which means although it may look like the conditions have been met they probably have not. Either the RSI or CCI have to cross at exactly the same time to signal an arrow if only 1 bar out of synchronisation then you get no arrow. This means you have to decide which indicator is going to be the main signal so if the RSI was to be the main signal the code would be
RSI[0]>rsilevel && RSI[1]<rsilevel && CCI[0]>ccilevel
if the CCI was the main signal then the code would be
RSI[0]>rsilevel && CCI[0]>ccilevel && CCI[1]<ccilevel
Another thing is it is using an iCustom call for the CCI if it is only a standard CCI then it would probably be better to write it into the indicator. if it is not standard then you need to supply that indicator so the code can be tested.
Trade what you see not what you hope
  • #9,394
  • Sep 18, 2015 4:55am Sep 18, 2015 4:55am
Quoting davood13
(sorry for my poor english) hi everyone is there possible that EA or indicator can set buy stop and sell stop order +20 and -20 pips above and below the price 10 seconds before news release? with tp +15 and s/l -10? like this guy in video? https://www.youtube.com/watch?v=HTchl2GAr6I

try this ....
http://www.forexfactory.com/showthre...61#post8475761
  • #9,395
  • Sep 18, 2015 5:15am Sep 18, 2015 5:15am
Quoting cja
{quote} ( example using long logic ) The main issue is the logic for the arrow, the arrow code is set for RSI[0]>rsilevel && RSI[1]<rsilevel && CCI[0]>ccilevel && CCI[1]<ccilevel which means although it may look like the conditions have been met they probably have not. Either the RSI or CCI have to cross at exactly the same time to signal an arrow if only 1 bar out of synchronisation then you get no arrow. This means you have to decide which indicator is going to be the main signal so if the RSI was to be the main signal the code would be RSI[0]>rsilevel...

Thank you very much cja for the explanation. I wish I could help myself and change the indi to make it better.

Is it possible to make the indi recognize rsi and cci crossing the levels not exactly at the same time but the same direction? And showing the arrow after both conditions? Able to try different settings.

I found out that rsi 5 combined with cci 10 is to "fast" and many wrong signals appear. So rsi 8 and cci 14 is quit good. The slower settings working as good filter.

If it is not possible, could you please add a message alert to the indi? That would be very nice.
Thanks again.
  • #9,396
  • Sep 18, 2015 5:52am Sep 18, 2015 5:52am
Quoting Ramaparasu
{quote} try this .... http://www.forexfactory.com/showthre...61#post8475761
Thank you so much
And falling's just another way to fly...
  • #9,397
  • Sep 18, 2015 6:38am Sep 18, 2015 6:38am
Quoting h4xforum
I am trying to use the TCCI indicator for an EA in a cross; however, the buffer value is 11 pips different from the position of the indicator on the chart. The data window gives the correct value but not the buffer. Please, help on this matter. {file}
I fixed it!!!!! By using all indicator parameters on the iCustom. Anyhow, thanks to all!
  • #9,398
  • Sep 18, 2015 6:40am Sep 18, 2015 6:40am
Hi, I am new here and need help finding an indicator.​

What I need is an indicator that can calculate the average range of the previous 240 candles, then calculate the current candles percentage of that average. If possible displayed as a percentage next to the current candle. Any help is appreciated.
  • #9,399
  • Sep 18, 2015 6:43am Sep 18, 2015 6:43am
Quoting EyeBeePipin
Hey guys, I was hoping for an calculator like the one in the pic. Can anyone please point me in the right direction? {image}
​
Follow the link, its way better
http://www.forexfactory.com/showthread.php?t=281772
  • #9,400
  • Sep 18, 2015 12:19pm Sep 18, 2015 12:19pm
Hi all

I put a question out there about creating renko charts for a basket of currencies but no one came back to me. Thankfully FerruFux put me on the trail of something as he recalled it already existed.

Well, I think I tracked down the indicators which can be placed on an offline chart of a basket of currencies to then feed the renko builder of the offline chart for a basket of currencies. the problem is, I think its not compatible with the new version of MT4 as it has an error in the code to do with a string conversion parameter. Is this a quick fix for someone?

The indicator is attached as well as an EA and the script to get the EA fed with data I believe.

Many thanks

fxtrader08
Attached File(s)
File Type: mq4 Kos_ind_RenkoLiveChart.mq4   32 KB | 670 downloads
File Type: mq4 Fake Ticks.mq4   < 1 KB | 721 downloads
File Type: mq4 Kos_EA_RenkoLiveChart.mq4   32 KB | 654 downloads
81 traders viewing now, 1 is registered:
yako47