I will code your EAs and Indicators for no charge | Page 405 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #8,081
  • May 18, 2015 8:32am May 18, 2015 8:32am
Quoting RobertBazil
{quote} Dear Sakisf Thank you very much for this. I would be very grateful if it also showed the text - i.e. S1, S2, R1, R2 etc. Also, it only shows one S1 level. Kind regards Robert
Are you sure? Perhaps your S2 is way down or it doesn't show well because it's a bit dark green. With regards to the letters, I don't really want them on the chart due to clutter but maybe someone else can fix it for you (i.e. I don't know how to do it properly).
Attached Image (click to enlarge)
Click to Enlarge Name: 3xSh4gK.png Size: 45 KB
  • #8,082
  • May 18, 2015 9:14am May 18, 2015 9:14am
Quoting sakisf
{quote} Are you sure? Perhaps your S2 is way down or it doesn't show well because it's a bit dark green. With regards to the letters, I don't really want them on the chart due to clutter but maybe someone else can fix it for you (i.e. I don't know how to do it properly). {image}
Dear Sakisf

I have checked and you are absolutely right. It was much lower down so I missed it.

Would be great to now have the labels......any takers?

Kind regards
Robert
  • #8,083
  • May 18, 2015 9:28am May 18, 2015 9:28am
Quoting Tomcat98
{quote} A bit late , sorry, Here are 2 indics: SINGLE_Buffer_Ergo extract the trend signal from your Ergo indic (simply leave it in the navigator, no need to set it in the sub window) Ergo_CANDLE indic will display the appropriate color of the candle according to your Ergo indic. Have a good trading week. Sincerely. Tomcat98 {file} {file}
Hi Tomcat,

Thank a lot, it is ok Tomcat as long as u welling to help me, really appreciate it. I try to set but cannot get the color i want any thing go wrong. Thank.
Attached Image (click to enlarge)
Click to Enlarge Name: Capture.PNG Size: 234 KB
  • #8,084
  • May 18, 2015 10:06am May 18, 2015 10:06am
Hi,

is there a way to make this indicator NON repaint?

Thanks a lot
Attached File(s)
File Type: ex4 Fisher_Yur4ik.ex4   8 KB | 437 downloads
  • #8,085
  • May 18, 2015 11:21am May 18, 2015 11:21am
Quoting TraderJoe
{quote} Need more info than "it does not work". In what way does it not work?
Hi TraderJoe,
When I save this indicator as part of chart template and when apply same template to other charts or reopen same chart, then indicator does not work.
Indicator is shown in List of indicators on the chart, however it does not draw lines on the chart and hence does not throw any alert.
I have reattached indicators here.
Please look into it if it is not much trouble.

Thanks
regards,
Attached File(s)
File Type: ex4 PriceAlert_Ver_1-2.ex4   11 KB | 441 downloads
File Type: mq4 PriceAlert_Ver_1-2.mq4   8 KB | 448 downloads
  • #8,086
  • May 18, 2015 3:10pm May 18, 2015 3:10pm
Quoting Richard Ong
{quote} Hi Tomcat, Thank a lot, it is ok Tomcat as long as u welling to help me, really appreciate it. I try to set but cannot get the color i want any thing go wrong. Thank. {image}
Hi Richard,
Thanks for your feedback.
It works well, be sure to select "line chart" in the Properties tab. (Right clic on chart, Properties, select "Line chart", OK ).
Have a good week.
Tomcat98
Attached Image (click to enlarge)
Click to Enlarge Name: Ergo CANDLE.png Size: 31 KB
  • #8,087
  • May 18, 2015 3:57pm May 18, 2015 3:57pm
Quoting Richard Ong
{quote} Hi Tomcat, Thank a lot, it is ok Tomcat as long as u welling to help me, really appreciate it. I try to set but cannot get the color i want any thing go wrong. Thank. {image}
Right click on the chart to bring up a window then select "Properties"
Make sure that you uncheck " Chart on foreground"
Attached Image

Select "Line graph" and "None" out of the drop down color list
Attached Image
Trade what you see not what you hope
  • #8,088
  • May 18, 2015 5:52pm May 18, 2015 5:52pm
HI every one, i have EA need to development , who can help ?
  • #8,089
  • May 18, 2015 6:26pm May 18, 2015 6:26pm
On Basket Trading EA or Dashboard Trading EA...With the BUY/SELL Basket Trading buttons/tabs lot of other info is available.
Instead of other info... is there any EA...which shows only BUY/SELL tabs..only BUY/SELL tabs...no other info. So that we can use it as Trade pad

~Thanks & regards.
~hanuraj
  • #8,090
  • May 18, 2015 11:28pm May 18, 2015 11:28pm
Quoting Tilltheend
{quote} Hi TraderJoe, When I save this indicator as part of chart template and when apply same template to other charts or reopen same chart, then indicator does not work. Indicator is shown in List of indicators on the chart, however it does not draw lines on the chart and hence does not throw any alert. I have reattached indicators here. Please look into it if it is not much trouble. Thanks regards, {file} {file}
Try this one.
Attached File(s)
File Type: ex4 PriceAlert_Ver_1-2-3.ex4   11 KB | 551 downloads
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,091
  • May 19, 2015 2:36am May 19, 2015 2:36am
Quoting marley60
{quote} do these 2 indicators("renko maker confirm" and "signal") repaint (more than just the actual bar)?
Yes, they are useless.
The dream will never die
  • #8,092
  • May 19, 2015 3:13am May 19, 2015 3:13am
Quoting fxdaytrader_
{quote} pls. see attached {file}
Hi Fxdaytrader

Can you please get me the mq4 file for the OsMA EA you had uploaded inyour above post. The OsMA indicator parameters required to be modified inside the program. Like I want all the moving averages in the osma to be LinearWaitedMovingAverage instead of FastEMA, SlowEMA, and the signal SMA. Can you help me on this.

FxOptimus
  • #8,093
  • Edited 6:07am May 19, 2015 3:41am | Edited 6:07am
I use to trade morning (European time) forex breakouts. It would help me to have a simple tool that draws:
- a rectangle: length = adjustable (in my case 8:00pm of previous day to 6:00am of today, GMT time); width = the max-min range of the time lenght; the size of the range (pips) should be shown somewhere.
- two lines, one above the max of the range (distance between this line and the max of the range = max-min range) and one below the min of the range (distance between this line and the min of the range = max-min range). Each horizontal line should show the price number of pips from the max (upper line) or the min (lower line). The two lines should be plotted from the beginning to the end of the trading day.
A plus: make possible to move the lines by setting the distance from the max or the min of the range (e.g. 100% = one time the range, 200% = two times the range,...); even better if the distance of the two lines may be tweeked independently.

The image shows what I am looking for (color of rectangle and lines, style of lines, position of numbers, etc. are not critical).

Anybody knows if something similar is already available? If not, any help (which is really appreciated, as usual)?
Thanks a lot.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 12 KB
  • #8,094
  • May 19, 2015 4:44am May 19, 2015 4:44am
hi trader joe i was wondering if its possible for you to put an alert on this indicator when the colour changes ,i will highly appreeciate for your time...thank you
Attached File(s)
File Type: ex4 EngiWSSbreakoutfull3.ex4   6 KB | 521 downloads
  • #8,095
  • May 19, 2015 5:28am May 19, 2015 5:28am
I'm trying to understand the algorithm to this code and I hope that someone can help. This code is an unusual type of ZigZag formula that displays semaphores on the chart. All other ZigZag codes that I've seen use variations of the ATR function, but this uses depth, deviation and backstep. My intention is to translate it into ThinkScript for the ThinkOrSwim platform, but I am completely overwhelmed by the MetaQuote code syntax. So maybe if I can get an explanation of the logic within the code, maybe I can develop it myself.

See attached image and code.

Attached Image (click to enlarge)
Click to Enlarge Name: Semaphores.jpg Size: 131 KB
Attached File(s)
File Type: txt AK_ZigZag ROYAL Pointer.txt   4 KB | 544 downloads
  • #8,096
  • May 19, 2015 6:57am May 19, 2015 6:57am
Quoting classy
{quote} many many thaks for your response and enlighten me ..i appreciate it.....my last two request is also pending ..lol...2nd last request of this thread was for 2 color zigzag indicator like when price up green trend line and when price donwn is trend is red ...i searched FF ..googled but no luck ..i see you are very helpfull if you please come forward and made simple 2 color zigzag indicator ...it will be great and ..asset of virtual world...this time no ligal problem..lol..God bless you
TJ.....any luck/chance to see 2 color zigzag mt4 .........................thanks
Say something meaningful or Silence!!
  • #8,097
  • May 19, 2015 8:07am May 19, 2015 8:07am
Hi everybody,

I trade Renko charts. I would like to have an indicator (MT4) that will display the daily Open Price as a horizontal line on my chart. I know about the "Daily open line" indicator which does exists for MT4 and that is precisely what I am looking for, but just one that will work on Renko (or non-time based) charts.

Due to the fact that Renko bars don't necessarily start at the start of a new day, the "daily open line " indicator don't always shows on the chart.

What I also would like to have in the "Renko Daily open line" indicator is, to show the Daily open price and not the open price of the 1st renko bar that is formed in the new day. This is not that important as having the Daily open line on every day but will be real nice to have.

Here are some screenshots with hopefully more information on what I need.

Any help would be appreciated.

Thanks

Attached Image (click to enlarge)
Click to Enlarge Name: Renko daily open1.jpg Size: 173 KB


Attached Image (click to enlarge)
Click to Enlarge Name: Renko daily open2.jpg Size: 183 KB


Attached File(s)
File Type: mq4 Daily open line.mq4   2 KB | 448 downloads
  • #8,098
  • May 19, 2015 10:25am May 19, 2015 10:25am
Quoting Tomcat98
{quote} Hi Richard, Thanks for your feedback. It works well, be sure to select "line chart" in the Properties tab. (Right clic on chart, Properties, select "Line chart", OK ). Have a good week. Tomcat98 {image}
Hi Tomcat & Cja,

Thank a lot both of you, really grateful, but I still cannot get the colour I want. Any step that i miss. Thank for advice.
Attached Image (click to enlarge)
Click to Enlarge Name: Capture2.PNG Size: 104 KB
Attached Images
  • #8,099
  • May 19, 2015 10:34am May 19, 2015 10:34am
Quoting TraderJoe
{quote} Ok trying to Simplify your explaination. You want to be able to draw lines on any indicator in the indicator window and have an alarm go off when the indicator touches any of the lines?

To all coders,

just to keep my idea alive. So if anybody got the time to make this usefull tool, would be great for many traders.
(drawing lines into indicator window works, but none with alarms)

Thanks
  • #8,100
  • May 19, 2015 12:10pm May 19, 2015 12:10pm
Hi.

Can somebody help me to change a indicator please, which has mtf function to interpolate?
Example: The mtf Indi is on a M1 chart but set to M5. Indicatorlines are shown like stairsteps.

How can I change the mql, or add the function to get smoothed lines for that example?

Paid some money for it, but the coder stopped working. So I try to do it.
Hope I just have to put in some more lines into the mql code. But what lines ?
Is it to hard for a beginner?

Thanks
138 traders viewing now