I will code your EAs and Indicators for no charge | Page 403 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #8,041
  • May 16, 2015 12:21am May 16, 2015 12:21am
Quoting wolf300
{quote} Hey TraderJoe, no I am not looking for a rsi with alerts. RSI is just an example. Drawing free S/R lines and trendlines into the subwindow. Parallel to those lines, do the same in the chart as usual. Often (again the rsi example) rsi 21 breaks a S/R line (not the usual levels, drawn with the horizontal line tool) or a trendline before price does the same in the chart. When you get the alarm from the sub....you are in the right place at the right time. So to speak it is technical analysis with S/R and trenlines in a subwindow, only with alarms...
Ok trying to Simplify your explaination.
You want to be able to draw lines on any indicator in the indicator window and have an alarm go off when the indicator touches any of the lines?
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,042
  • May 16, 2015 3:13am May 16, 2015 3:13am
@TraderJoe
Sorry for my bad explaination (meant implement)

At the moment the ea takes trades when 2MA are crossing , which are using the same timeframe.

I would like to get the ea taking trades, when 2 MA on different timeframes are crossing.

For example, taking a trade, when EMA 200 on 30min timeframe is crossing EMA 200 on 4h-timeframe.
So in the settings, there should be the opportunity for each of the MAs to give in the concerning timeframe-
just as the attached indikator MTF moving average does.
  • #8,043
  • May 16, 2015 4:31am May 16, 2015 4:31am
pliz CODERS help ME put a pop up alert on this indicator ...RED =SELL AND BLUE = BUY my email is [email protected] ,thanks
Attached Image (click to enlarge)
Click to Enlarge Name: ARRO2.GIF Size: 6 KB
Attached File(s)
File Type: ex4 EngiWSSbreakoutfull3vg.ex4   6 KB | 670 downloads
  • #8,044
  • May 16, 2015 4:44am May 16, 2015 4:44am
Hi,
Can you add me a trailing stop and breakeven to this EA.
Thx in advance
Attached File(s)
File Type: ex4 MA2CCI05.ex4   14 KB | 374 downloads
File Type: mq4 MA2CCI05.mq4   7 KB | 498 downloads
  • #8,045
  • May 16, 2015 6:11am May 16, 2015 6:11am
Quoting writegvf
@TraderJoe Sorry for my bad explaination (meant implement) At the moment the ea takes trades when 2MA are crossing , which are using the same timeframe. I would like to get the ea taking trades, when 2 MA on different timeframes are crossing. For example, taking a trade, when EMA 200 on 30min timeframe is crossing EMA 200 on 4h-timeframe. So in the settings, there should be the opportunity for each of the MAs to give in the concerning timeframe- just as the attached indikator MTF moving average does.

The indicator only has one MA which can be MTF, not two. Also the EA uses timeframe for more than one purpose. I can make the MA's multi-timeframe but I am not sure the EA will work as expected. You can try this but if it's not the way you wanted it I am not working on it further... I provide it for amusment purposes only and I do not recommend if for live trading. Also I had to change the main code just to get the original EA (and this one) to create orders.
Attached File(s)
File Type: ex4 UniversalMACrossEA_up_MTF.ex4   45 KB | 528 downloads
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,046
  • May 16, 2015 8:10am May 16, 2015 8:10am
Quoting Tomcat98
{quote} Hi Richard, Can be done with your indics if you post them. Tomcat98
Hi Tomcat,

Thank a lot for helping, attach is the indicator.
Attached File(s)
File Type: mq4 Ergo.mq4   5 KB | 503 downloads
  • #8,047
  • May 16, 2015 8:39am May 16, 2015 8:39am
Thanks a lot for your superb service, even at the weekend !
Backtest works fine, I will take some trades on demo-account next week
  • #8,048
  • May 16, 2015 10:50am May 16, 2015 10:50am
@TraderJoe and other coders in the forum a programmer created a Zup EA for me that trades when last leg of Zup indicator is 1.00.

But there is a problem.


When I attach ZupEA (v1.02).mq4 to my chart and last leg of Zup indicator is 1.00 EA does not open any trade on my platform but Whenever the Programmer attaches the same ZupEA (v1.02).mq4 to his chart and last leg of Zup indicator is 1.00 EA opens trade and I can view opened trades in investor mode on my platform. Can you please explain what I am doing wrong???

The Programmer says I should send him the journal log and experts log of MT4 I am running EA on to check what happened.
Since I installed MT4 under the directory C:\MT4\Fxglory MetaTrader 4

Where do I find the journal log?
Where do I find the experts log?
  • #8,049
  • May 16, 2015 11:43am May 16, 2015 11:43am
Quoting classy
{quote} Great cja,gumrai,traderjoe ,lghr..and other coder who are selfless and doing fanatsic ..God bless you. ,it is my humble request to all please come forward to see this ea and make it user friendly like see image after load ea it open stop order and limit order (which is great and speciality)but all lines jumbled which is not visually comfortable... when i drag it angled/curvy ..i want 1)space between lines so that visible clearly entry sl tp 2)line should straight not angled or curve looking forward ....thanks in advance {image}
may be i am not lucky enough lol no one (Grat coders) is interested look/response about my request..if you please let me know .thanks in adavnce
Say something meaningful or Silence!!
  • #8,050
  • May 16, 2015 1:33pm May 16, 2015 1:33pm
Quoting writegvf
Thanks a lot for your superb service, even at the weekend ! Backtest works fine, I will take some trades on demo-account next week
Will be interesting to know, please keep in touch.
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,051
  • May 16, 2015 1:42pm May 16, 2015 1:42pm
Quoting Evasparkling
@TraderJoe and other coders in the forum a programmer created a Zup EA for me that trades when last leg of Zup indicator is 1.00. But there is a problem. When I attach ZupEA (v1.02).mq4 to my chart and last leg of Zup indicator is 1.00 EA does not open any trade on my platform but Whenever the Programmer attaches the same ZupEA (v1.02).mq4 to his chart and last leg of Zup indicator is 1.00 EA opens trade and I can view opened trades in investor mode on my platform. Can you please explain what I am doing wrong??? The Programmer says I should send...
Run your MT4 platform during market hours and reproduce the problem so it will be in the logs.
You should see a menu at the bottom that shows "Alerts | Mailbox | Market | Code Base | Experts | Journal"... There may be others too.
If you do not see this footer menu the do a "CTRL-T"
Now you should see it.

NEXT...
1. Choose Experts and click on any one of the lines to highlight it.
2. Hit "CTRL-A" to highlight all the lines.
3. Hit "CTRL-C" (or Right-Click and choose Copy) to copy
4. Open your Wordpad (or other Word type Document program)
5. Paste into that program and save as Experts_Messages or whatever you want to call it.
6. Repeat 1-5 for the Journal Messages and send those files to your programmer.

Good luck!
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,052
  • Edited 2:03pm May 16, 2015 1:49pm | Edited 2:03pm
Quoting classy
{quote} may be i am not lucky enough lol no one (Grat coders) is interested look/response about my request..if you please let me know .thanks in adavnce
Hello classy, I looked at this code when you posted it and was not able to go further because it has been decompiled. Because of this we are not allowed to work on it in any way because not only is it Illegal but it is also against FF rules and would get us banned. You need to contact the original copyrighted owners of this code and ask them either for the original .MQ4 file and post it here or ask them to make the changes for you.

Just be sure anytime you have a indy or ea with an accompanied .dll file you copy that file into the mql4/libraries folder.

The contact info is a the top of most every document.

#property copyright "Copyright 2010, High Gain No Risk."
#property link "http://highgainnorisk.com"
Charts never lie! (everyone else does) ... now where's that FF Adult lounge
  • #8,053
  • May 16, 2015 2:24pm May 16, 2015 2:24pm
Quoting TraderJoe
{quote} Hello classy, I looked at this code when you posted it and was not able to go further because it has been decompiled. Because of this we are not allowed to work on it in any way because not only is it Illegal but it is also against FF rules and would get us banned. You need to contact the original copyrighted owners of this code and ask them either for the original .MQ4 file and post it here or ask them to make the changes for you. Just be sure anytime you have a indy or ea with an accompanied .dll file you copy that file into the mql4/libraries...
many many thaks for your response and enlighten me ..i appreciate it.....my last two request is also pending ..lol...2nd last request of this thread was for 2 color zigzag indicator like when price up green trend line and when price donwn is trend is red ...i searched FF ..googled but no luck ..i see you are very helpfull if you please come forward and made simple 2 color zigzag indicator ...it will be great and ..asset of virtual world...this time no ligal problem..lol..God bless you
Say something meaningful or Silence!!
  • #8,054
  • May 16, 2015 3:19pm May 16, 2015 3:19pm
Quoting TraderJoe
{quote} Hello classy, I looked at this code when you posted it and was not able to go further because it has been decompiled. Because of this we are not allowed to work on it in any way because not only is it Illegal but it is also against FF rules and would get us banned. You need to contact the original copyrighted owners of this code and ask them either for the original .MQ4 file and post it here or ask them to make the changes for you. Just be sure anytime you have a indy or ea with an accompanied .dll file you copy that file into the mql4/libraries...
Hi dear Trajoe , help me my indicator is not displayed .
Attached File(s)
File Type: mq4 T3_ITrend_mtf+alerts.mq4   10 KB | 464 downloads
  • #8,055
  • May 16, 2015 4:41pm May 16, 2015 4:41pm
Hi, I need help with the attached indi (datadaily). It takes the readings from the csv file (dataday.csv) and draws them on the indi window. However it only draws on the daily and above and I need it to show on any tf above 1h.

The data indi is the original from ff, when I use it with data.csv (hourly info) it appears normally on any tf above 1h but I need datadaily more.

Thanks in advance.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 8uGZIr4.png Size: 45 KB
Click to Enlarge Name: FuKUB8p.png Size: 33 KB
Attached File(s)
File Type: csv data.csv   4 KB | 407 downloads
File Type: csv dataday.csv   < 1 KB | 388 downloads
File Type: mq4 Data.mq4   3 KB | 438 downloads
File Type: mq4 Datadaily.mq4   3 KB | 438 downloads
  • #8,056
  • May 17, 2015 5:49am May 17, 2015 5:49am
Quoting TraderJoe
{quote} Ok trying to Simplify your explaination. You want to be able to draw lines on any indicator in the indicator window and have an alarm go off when the indicator touches any of the lines?
Hi TraderJoe,

that is exactly what I am looking for.

Is it possible to do this in a indikator window ?

Regards
  • #8,057
  • May 17, 2015 6:19am May 17, 2015 6:19am
Ciao WRITEGVF

I also use universalmacross,
if you are pleased we can share some settings
thanks
  • #8,058
  • May 17, 2015 8:27am May 17, 2015 8:27am
Quoting Tomcat98
{quote} Hi Richard, Can be done with your indics if you post them. Tomcat98
Hi Tomcat,

I only used property indicator_color1 LimeGreen and property indicator_color2 Red. property indicator_color 3 and 4 none color. Thank.
Attached Image (click to enlarge)
Click to Enlarge Name: Capture.PNG Size: 47 KB
Attached File(s)
File Type: mq4 Ergo.mq4   5 KB | 440 downloads
  • #8,059
  • May 17, 2015 3:10pm May 17, 2015 3:10pm
Can someone please add arrows and alert to this indicator when the priceline change color, THANKS.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 10 KB
Attached File(s)
File Type: ex4 ! X2 PRICE ZONE 2.ex4   28 KB | 422 downloads
File Type: mq4 ! X2 PRICE ZONE 2.mq4   6 KB | 491 downloads
  • #8,060
  • May 17, 2015 4:16pm May 17, 2015 4:16pm
Quoting Richard Ong
{quote} Hi Tomcat, I only used property indicator_color1 LimeGreen and property indicator_color2 Red. property indicator_color 3 and 4 none color. Thank. {image} {file}
A bit late , sorry,
Here are 2 indics:
SINGLE_Buffer_Ergo extract the trend signal from your Ergo indic (simply leave it in the navigator, no need to set it in the sub window)
Ergo_CANDLE indic will display the appropriate color of the candle according to your Ergo indic.
Have a good trading week.
Sincerely.
Tomcat98
Attached File(s)
File Type: mq4 Ergo_CANDLE.mq4   3 KB | 624 downloads
File Type: mq4 SINGLE_Buffer_Ergo.mq4   2 KB | 652 downloads
142 traders viewing now