I will code your EAs and Indicators for no charge | Page 378 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #7,541
  • Mar 31, 2015 3:02am Mar 31, 2015 3:02am
hello all,
Can someone help me to compile this EA with mql file into .exe file . so Ea can work . thank very much
Attached File(s)
File Type: mq4 MACD+CCI Strategy EA v1.02.mq4   38 KB | 620 downloads
  • #7,542
  • Mar 31, 2015 3:06am Mar 31, 2015 3:06am
some kind person could help me with this EA? it could install add a start time of the EA and time of completion of this? for the EA to work properly is important that there is volatility, which would be interesting to configure with higher volatility schedule.
thank you very much for everything.
Attached File(s)
File Type: mq4 mGRID EA_mod.mq4   10 KB | 437 downloads
  • #7,543
  • Mar 31, 2015 3:07am Mar 31, 2015 3:07am
Hello,

is it possible to convert this indicator into a mtf indicator?

Thanks in advance!!
Attached File(s)
File Type: mq4 Robby DSS Bressert Colored with alert v1.1.mq4   4 KB | 557 downloads
File Type: ex4 Robby DSS Bressert Colored with alert v1.1.ex4   5 KB | 487 downloads
  • #7,544
  • Mar 31, 2015 3:26am Mar 31, 2015 3:26am
Quoting hanluc
hello all, Can someone help me to compile this EA with mql file into .exe file . so Ea can work . thank very much{file}
try it and share the result.
Attached File(s)
File Type: ex4 MACD+CCI Strategy EA v1.02.ex4   20 KB | 585 downloads
  • #7,545
  • Mar 31, 2015 3:28pm Mar 31, 2015 3:28pm
Hello,
I need an EA that open multiple trades based on this indicator,
the EA open the trades after the signal has been issue.
the first trade start let say buy 0.01 then the indicator give a sell trade then the EA make sell trade with 0.02 and after the indi gives a buy trade the EA open a buy trade with 0.04 and so on, also a maximum of 10 trades to open "this can be change"
also i need a place for TP. like if the total trades reach to 10 then close all. it should work on all time frames.


thanks in advances guys
Attached File(s)
File Type: ex4 arrow v2.ex4   14 KB | 505 downloads
File Type: mq4 arrow v2.mq4   5 KB | 623 downloads
if there is market there will be opportunities
  • #7,546
  • Mar 31, 2015 4:54pm Mar 31, 2015 4:54pm
Please, can someone make this indicator into MTF?
THX
Attached File(s)
File Type: mq4 i-Regr.mq4   5 KB | 512 downloads
  • #7,547
  • Edited Apr 1, 2015 12:37am Mar 31, 2015 7:18pm | Edited Apr 1, 2015 12:37am
Hi everyone,

I will appreciated if some one change the EA to Reverse the Trade and input setting

a) Reverse Trade ( BUY = price close over the upper envelope Reverse Trade
IF price close under lower envelope =SELL )

b) MA_Period and Envelope Deviation shows to EA input setting change

Thanks in advance and cheers.
Attached File(s)
File Type: mq4 envelopes.mq4   10 KB | 544 downloads
  • #7,548
  • Edited Apr 1, 2015 7:05pm Mar 31, 2015 10:06pm | Edited Apr 1, 2015 7:05pm
Reverse trades input added plus altered code to allow both BUY and SELL trades to exist at the same time. As before the indicator needs to be in your indicator folder or the EA will not work. Version 4.1 has had the trading bar code changed to use the current candle and the previous candle crossing the CCI levels as a trade signal.
Attached File(s)
File Type: mq4 FXPT_CCINRPadv4.mq4   10 KB | 577 downloads

Attached File(s)
File Type: mq4 FXPT_CCINRPadv4.1.mq4   10 KB | 553 downloads

Attached File(s)
File Type: mq4 cci - nrp & mtf advanced.mq4   13 KB | 592 downloads
Trade what you see not what you hope
  • #7,549
  • Mar 31, 2015 10:40pm Mar 31, 2015 10:40pm
Hi everyone,

I'm looking for a simple Bollinger Band Alert, when the candle (alert once per candle) touched the upper or lower band it will send a notification to my iPhone and

a popup a screen alert, I know this is very simple coding but I'm zero knowledge about coding and I've been searching the net for days but still couldn't find what

i need, any help here will be greatly appreciated. Thanks!
  • #7,550
  • Apr 1, 2015 12:14am Apr 1, 2015 12:14am
Quoting StOoOk
Hello, I need an EA that open multiple trades based on this indicator, the EA open the trades after the signal has been issue. the first trade start let say buy 0.01 then the indicator give a sell trade then the EA make sell trade with 0.02 and after the indi gives a buy trade the EA open a buy trade with 0.04 and so on, also a maximum of 10 trades to open "this can be change" also i need a place for TP. like if the total trades reach to 10 then close all. it should work on all time frames. thanks in advances guys {file} {file}
Sorry it is decompiled code so I doubt any of the programmers will look at it.
Trade what you see not what you hope
  • #7,551
  • Apr 1, 2015 12:18am Apr 1, 2015 12:18am
Quoting jtrujillo
Hello, is it possible to convert this indicator into a mtf indicator? Thanks in advance!! {file} {file}
Hi,
I found this MTF Bressert indicator in my files.
Attached File(s)
File Type: mq4 DSS Bressert mtf.mq4   4 KB | 624 downloads
Trade what you see not what you hope
  • #7,552
  • Apr 1, 2015 12:20am Apr 1, 2015 12:20am
Quoting danzka
Hello fellow traders, I'm currently learning Volume Spread Analysis by Richard Wyckoff, I think it gives great insight to this market. in VSA there's a No Demand or No Supply (NDNS) concept, which is a candle with very low volume and often a very short candle I'm looking for an indicator which mark the NDNS candle, I have look around the internet but did not found anything satisfactory The idea is simple the indicator should mark the candle in any color if: 1. The candle is shorter than x pips (x can be set in the setting) 2. The candle volume is...

1. The candle is shorter than x pips (x can be set in the setting)
So what does shorter mean in this context. High to Low or Open to Close
Trade what you see not what you hope
  • #7,553
  • Apr 1, 2015 12:23am Apr 1, 2015 12:23am
Quoting GodsClown
Please, can someone make this indicator into MTF? THX {file}
It is already an MTF indicator so no changes needed.
Trade what you see not what you hope
  • #7,554
  • Apr 1, 2015 12:52am Apr 1, 2015 12:52am
Quoting sminage
{quote} try it and share the result. {file}
Hi sminage ,
Thank you very much .i tested it but not good .
Can you help me fix another EA .not keep going enter after take profit . or just one trade and wait for another signals.
thanks
Attached File(s)
File Type: mq4 Fx Prime EA.mq4   13 KB | 515 downloads
Attached File(s)
File Type: ex4 Fx Prime EA.ex4   20 KB | 465 downloads
  • #7,555
  • Apr 1, 2015 1:03am Apr 1, 2015 1:03am
Quoting cja
{quote} It is already an MTF indicator so no changes needed.
So, he has chosen the correct user name?

It takes a lot for me to IGNORE you, but you can try.
  • #7,556
  • Apr 1, 2015 1:37am Apr 1, 2015 1:37am
Quoting cja
{quote} Hi, I found this MTF Bressert indicator in my files. {file}
Works perfect, thanks!!!
  • #7,557
  • Apr 1, 2015 4:21am Apr 1, 2015 4:21am
Quoting grin
Could someone update this for both compiling and working under build 600+? Code compiles, but does not run properly. XML fetching web call needs to be updated. Here are some details on this: Problem definition: http://www.forexfactory.com/showthre...51#post7430051 Fix tips: http://www.forexfactory.com/showthre...40#post7461140 {file}
try the attached one. it is much better than yours.

ffcal was rejected by me some time ago because of what you are describing.

best,
D.P.
Attached File(s)
File Type: ex4 NewsCal-v107.ex4   29 KB | 456 downloads
Hunting High and Low
  • #7,558
  • Apr 1, 2015 7:04am Apr 1, 2015 7:04am
Quoting cja
{quote} 1. The candle is shorter than x pips (x can be set in the setting) So what does shorter mean in this context. High to Low or Open to Close
Thanks for the reply, I mean high to low (candle spread)
for example if the setting is lower than 10 pips, the indicator should mark any candle that high to low spread is less than 10pips
In the end its just a stupid numbers game
  • #7,559
  • Apr 1, 2015 10:35am Apr 1, 2015 10:35am
Quoting grin
{quote} I prefer the compact version. It does not obstruct chart, draws vertical line to pinpoint announcement locations. Greater detail can be looked up at FF page. The indi is nowhere critical, but it would be nice to have its code updated as opposed to use of ex4 files compiled on older builds.
Ok! So you should ask the author of Traderathome (TAH) in the Sonic R system thread for corrections.

Best,
D.P.
Hunting High and Low
  • #7,560
  • Apr 1, 2015 11:35am Apr 1, 2015 11:35am
Hello guys,

I was trying to add push notification alert into this default custom indicator but i have 2 error 'BandsPeriod' - undeclared identifier & 'BandsDeviation' - undeclared

identifier, can someone here help me to find out what's the problem please?

thanks in advance

Here's the attach file:
Attached File(s)
File Type: mq4 Bands.mq4   14 KB | 388 downloads
161 traders viewing now, 4 are registered:
k3nshinz3139
,
aspiring91
,
BestTraderEv
,
mmurat