I will code your EAs and Indicators for no charge

You must attach the indicators you are using (preferred: the .mq4 files) and describe when you enter/exit a trade.

Regarding the martingale-stuff: Martingale is not beloved here, but you could ask some professional programmer to code the strategy or ask at mql5.com/en/job ...

sorry, I am not interested.
btw, this is not my thread and I am not doing everything for free. If I want to help, I will try it. If I am not interested I will ignore requests ...

alternative: look at http://www.forexfactory.com/showthread.php?t=470340 and compile with the build 509 editor ...

Hi guys,

Is it possible to build a template that works in mt4 build 646 that has these features?:
one position open at a time
long on x period ma (of course x means custom )
short on x period ma
close long on x period ma
close short on x period ma
sl x times (with x customizable and double variable (settable from 0.x to x), if set to 0.0 = no sl) ATR value
tp x times ATR value (same as above)
trailing x times ATR value (same as above)
lot size variable from 0.01 lots to x lots always related to an ATR multiplier but with the limit of up to x % of balance we want to risk

tnx
eugenio

what does "on x period ma" mean? if ma cross the price, previous close was < price and current close is > price, etc.?
how should the lotsize be calculated depending on atr?

Hi,
on x period ma
means that a position is opened long if close[1] is above x period ma and so on
variable lot size
means that I can set a min and a max ATR value (0 - 100%) and the ea will open 0.0x lots following a linear function (proportion) of the ATR.. But at the same time 0.0x lot can't be > of my max disposable sum. I have to be able to set this sum from 0.x% to 100% of my balance.

and close[2]< ma?


what function, how it is computed? I do not see any sense. What if atr for example is 3 pips, example?

example
long if close[1] > ma(20)
short if close[1] < ma(20)
close long if close[1] < ma(10)
close short if close [1] > ma(10)


with regard to lots opened we need to have an external variable named ATR_multiplier that we can set from 0.0x to 1.
The ea will open x LOTS with LOTS == ATR* ATR_multiplier (LOTS has to be rounded)
But LOTS must be < max_disposable_sum
with
extern max_disposable_sum = from 0.x% to 100% of balance

hai to all coders,

with all respect,
please try to code the following,

this is just a idea for tick oscilator.

though renko gives the edge of the trend following system, but still something is missing. so i tried a idea to get some more information from the renko bar. my idea is simple at mt4 we are getting the data by ticks. so each and every bar has it own tick volume. what we are going to do is we are going to separate the positive and negative ticks. positive ticks means higher ticks (uptrend),negative ticks means lower ticks (downtrend). for example the candle open is the first tick of the particular bar. we will take this as the base tick, and assign initial value of positive tick and negative tick as 0, now after this base tick , if the first tick is above the base tick we will add the positive tick count as 0+1 = 1, else the first tick after the base tick is lower than the base tick we will add the negative tick as 0+1 =1, and set the base tick value as current bid ( first tick value), next the second tick after the first tick is above the first tick then we will to the positive tick as 1+1 = 2, else the,second tick is lower than the first tick then we will add the negative tick count as 1+1=2, and assign the base tick vale as current bid(second tick value), like wise this process will continue until the respective bar close.
why we are doing this,
1] we will able to know the condition of the bar, how bears fought, or how bulls were fought.
2] if we take a a five pips gap like 100.10 to 100.30, if we look at the positive count and the negative count the we will able to know the exact demand and the support area more then accurately.
tick=bid
i=Open[i];// initial value of i is open bid value of the bar//
h=0; // initial value of positive tick count//
l=0; // initial value of negative tick count//
//if the first tick after the open bid tick is above the open then//
h=0+1;
i= current bid;
// else if first tick after the open bid is below the open then//
l=0+1;
i= current bid ;
// if second is above the first bid then//
h=1+1
i= current bid;
// else if the second tick is below the fist tick then//
l=1+1;
i= current price;
//like wise this process will continue up to the bar close//
indicator buffer as histogram in separate window
ptick = h[i];
ltick = l[i];
thanks,

Sorry meh I was at the uni ahah, here are more details:

Buy and sell entries are determined by the trix level, buy if it goes positive and sell if it gets negative, but it has to be in a certain frame on which we have an upper trend osma (slope > 0) in order to buy (and <0 to sell or close the previous buy order), and the matrix (in this example I'm using the Genesis matrix which is pretty the same as the symphonie one) has to be in majority giving positive signals (over 3 criterias white here to buy, red to sell)

The exits are determined either by a TP (the higher is the tf, the higher are the tp), or by a switch of the osma slope direction, or by a loss of the 3 positive or negative criterias coming from the matrix, I use the 3 depending on the way I trade, I use a tight tp when I have to leave and I don't want to let an order run in the mid term

Joined an example of how I open

For the trix I'm sorry I couldn't find the mq4 I think swingman didn't share the source hope it's not so bad cause it's the best trix I've tried so far

Supertrix default setups (period =3)
Osma 13/38 period = 8

Don't worry about the combo martingale/reversed martingale thing, I get it and it's quite hard to implement it safely in such a strategy even more if it has to recognize the market volatility and trend to switch of mode, I mean I've never seen an ea of this kind among my time spent on forums and it's my last priority *_*

it is senseless (so I have not implemented this), for example -> LOTS == ATR* ATR_multiplier, set atr=10 pips and atr_multipllier = 2.0, you will get lots = 10*2.0 = 20.0 LOTS ....
or, if you would like to get the origin atr-value (here: 5 digit broker): 0.00010 x 2.0 = 0.0002 LOTS (would be rounded to brokers minimum lots)

pls. find attached a quick version of an ea based upon your strategy. Note that I will NOT modify it further (although I would do some things different, e.g. check for minimum distance, direction of the close ma when opening trades, etc. pp.) ...

I downloaded this indy but for some reason its not loading



This one is, but not MTF


Thanks very much

Hello Members,

Greetings! Thank you for facilitates the thread so I can come here to get help.

Can some one help me How to code an EA based on RSI Upturn & Dnturn?

I know: '<' means When the left value is less than the right value. '>' means When the left value is greater than the right value.

RSI1=iRSI(NULL,RSITimeFrame,RSIPeriod,PRICE_CLOSE,0)>RSI2=iRSI(NULL,RSITimeFrame,RSIPeriod,PRICE_CLOSE,1);

How about RSI Upturn & Dnturn?

Thank You

Resistance 3 (R3) = P + {1 * (High - Low)}
Resistance 2 (R2) = P + {0.618 * (High - Low)}
Resistance 1 (R1) = P + {0.382 * (High - Low)}
Pivot Point (P) = (High + Low + Close)/3
Support 1 (S1) = P - {0.382 * (High - Low)}
Support 2 (S2) = P - {0.618 * (High - Low)}
Support 3 (S3) = P - {1 * (High - Low)}
High= Today High Low = Today Low

ı see too many channel indicator.
we always calculated to day before's h/l for pivot sup and resist .
i m sorry if it is already have but ı want to see fibonanci sup and resist channel based today's h/l and bar close.
Anyone can make it or is it already done.
ı mean indicator like this .
But calculated today's Fib sup piv res

Dear fxdaytrader I’m using the ZUP(V110 Poruchik) indicator with some good success. The indicator has an option in the inputs ("Filtr XB"). When this option is set on “true” the ratio XB is ignored in pattern calculation.
I was wondering if you could be kind enough to add some extra options:
Filtr AC
Filtr BD
Filtr XD
So that whenever any of these new inputs is on “true” their ratio can be ignored in pattern calculation.If someone doesn’t want the new feature then they can keep the new inputs on “false” . Thanks for your esteemed help in advance

If( RSI4 < RSI3 && RSI3 < RSI2 && RSI2 < RSI1) // RSI is increasing with each bar, so wait until RSI2 > RSI and you will have a Dnturn.

Hi Guys,

Hope anyone there could give a hint or at least provide a sample line of code for CloseOrder that will look for openpositions and act accordingly if open position is a buy or a sell.

Example:

EA opened 3 long positions and 3 short positions. Only short positions will be closed by the CloseOrder and leave the long positions open.

Thanks.

Sorry, I am not interested because I do not want spend (much) time in finding out how it works, etc. pp.
maybe somebody else will do that

Hi all,

Can you assist?

I am searching for an EA that will cancel limit orders (pending orders) once 'x' trades are open.
e.g I have 10 limit orders, 4 are hit (become open), the other pending orders are cancelled.

Additionally, cause I am lazy, it would handy if on-chart, it showed that the pending order is x pips from current price and there is important pending calender news that may effect the pair to be announced in x minutes (counting down) -

Kindly advise if you have seen this anywhere (or part of this) or if somebody here wants to program it..

Many Thanks

Dear fxdaytrader_

I am very grateful very much for your generosity in this forum ... I hope God always protect you ... amen.

Thank you very much

quick done, but seems to work (once >= x orders are open no pendings will be allowed, so deleted) ...

you can filter by symbol (what means = current charts pair only) and/or magicnumber.