I will code your EAs and Indicators for no charge | Page 170 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #3,381
  • Dec 23, 2013 11:08am Dec 23, 2013 11:08am
Quoting hanover
{quote} I understand the calculations in MT4's terminal, i.e. Equity = Balance + Profit/Loss Free margin = Equity – Margin Margin level% = Equity / Margin x 100 In the account summary, it looks like: Margin available = Balance + Unrealized P&L – Margin Used i.e. 317.57 + (-63.40) – 205.48 = 48.69 (let's put the 1c difference down to rounding) I assume that the small difference between P/L in the Terminal (-63.79) and Unrealized P&L (-63.40) is due to swap. The problem is that the Margin Used in the Account Summary (205.48) is vastly different from...
this help?

This calculation uses the following formula:
({BASE} / {Home Currency}) * units) / (margin ratio)
For example, suppose:
Home Currency = USD
Currency Pair = GBP/CHF
Base = GBP; Quote = CHF
Base / Home Currency = GBP/USD = 1.5819
Units = 1000
Margin Ratio = 20:1
Then, margin used:
= (1.5819 * 1000) / 20
= 79.095 USD

http://fxtrade.oanda.com/analysis/margin-calculator

(i'm using leverage: 50:1)
5%
  • #3,382
  • Dec 23, 2013 11:11am Dec 23, 2013 11:11am
Quoting EliteNatt
{quote} this help? This calculation uses the following formula: ({BASE} / {Home Currency}) * units) / (margin ratio) For example, suppose: Home Currency = USD Currency Pair = GBP/CHF Base = GBP; Quote = CHF Base / Home Currency = GBP/USD = 1.5819 Units = 1000 Margin Ratio = 20:1 Then, margin used: = (1.5819 * 1000) / 20 = 79.095 USD http://fxtrade.oanda.com/analysis/margin-calculator (i'm using leverage: 50:1)
oh wait it's diff from summary
let me go find it
5%
  • #3,383
  • Edited 11:40am Dec 23, 2013 11:22am | Edited 11:40am
Quoting hanover
{quote} I understand the calculations in MT4's terminal, i.e. Equity = Balance + Profit/Loss Free margin = Equity – Margin Margin level% = Equity / Margin x 100 In the account summary, it looks like: Margin available = Balance + Unrealized P&L – Margin Used i.e. 317.57 + (-63.40) – 205.48 = 48.69 (let's put the 1c difference down to rounding) I assume that the small difference between P/L in the Terminal (-63.79) and Unrealized P&L (-63.40) is due to swap. The problem is that the Margin Used in the Account Summary (205.48) is vastly different from...
I think it's diff because non-major?

http://www.oanda.sg/help/how-to-calc...al_margin_used

http://www.oanda.sg/help/policies/margin-rules

I'm using Oanda leverage:50:1
5%
  • #3,384
  • Dec 23, 2013 11:22am Dec 23, 2013 11:22am
Quoting Hodgires
Hi Hanover, how are you?, hope all is well...I have a simple request..hopefully u can help. This indicator works ok, but i think it needs this fix to be more useful... The problem is: anytime i change the fib defaults to my preferred settings, the data always changes back to original fib default data when it recalculates....So what i need is just the data i enter to remain the same. Thanks ps: and if you can add the option to turn on/off the alerts, that would be super...thanks David. Hodge {file}
Hi,

I struggle with other programmer's code. And it's Xmas, and I'm busy with a lot of other stuff, which doesn't help.

Attached is a fibo add-on to zigzag that I wrote a couple of years ago. I think it does much the same thing (plots a fibo across the most recently completed swing point), and you can customize the fibo levels, colors, etc. It doesn't have alerts — I'm not sure what these would be for (price reaches a certain fibo level, perhaps?)

Anyway, it's the best that I can do in the time that I have available.

To install:
--- Download the .mq4 and .ex4 files to your ....(MT4)/experts/indicators folder.
--- Download the .mqh files to your ....(MT4)/experts/include folder (note: the .mq4 file will not compile correctly without these).
--- Then exit and restart MT4.

Happy holidays.

David
Attached File(s)
File Type: mq4 Zigzag with Fibo.mq4   12 KB | 592 downloads
File Type: ex4 Zigzag with Fibo.ex4   22 KB | 500 downloads
File Type: mqh hanover --- function header (np).mqh   14 KB | 484 downloads
File Type: mqh hanover --- extensible functions (np).mqh   118 KB | 510 downloads
  • #3,385
  • Dec 23, 2013 11:43am Dec 23, 2013 11:43am
Quoting EliteNatt
{quote} I think it's diff because non-major? http://www.oanda.sg/help/how-to-calc...al_margin_used I'm using Oanda leverage:50:1
If you can do the research and come up with the precise formula, I'll code it for you; but I don't have time to experiment with dozens of different formulas, until one of us stumbles on the correct one. I'm fairly certain that the formula you gave in post #3381 gives the same result as MT4's terminal, as I've used it before. If there are different margin requirements for different pairs, that override the leverage settings built into MT4, then I'd need to know all of them.
  • #3,386
  • Dec 23, 2013 11:47am Dec 23, 2013 11:47am
Quoting hanover
{quote} If you can do the research and come up with the precise formula, I'll code it for you; but I don't have time to experiment with dozens of different formulas, until one of us stumbles on the correct one. I'm fairly certain that the formula you gave in post #3381 gives the same result as MT4's terminal, as I've used it before. If there are different margin requirements for different pairs, that override the leverage settings built into MT4, then I'd need to know all of them.
it's diff because I put on eur/try 3000 units and leverage 50:1 but in summary it's show as leverage 20:1 because it's non-major pair

when I caculate as leverage 20:1 it's same in summary

this might help
http://www.oanda.sg/help/policies/margin-rules

How Margin is Calculated
When you have open trades for many different currency pairs, your account’s margin requirement is calculated by weighting the margin requirements for the various trades at their respective size and rates.
If this calculation is less than the margin requirement for the leverage set on your account, it takes precedence (if it is higher, then your default leverage is used).
For example, if you are trading pairs with a minimum 3% margin rate (or 33:1 leverage) and you’ve set your leverage at 10:1, the required margin will be 10% rather than the 3% minimum required by regulation.
5%
  • #3,387
  • Dec 23, 2013 11:54am Dec 23, 2013 11:54am
Quoting hanover
{quote} If you can do the research and come up with the precise formula, I'll code it for you; but I don't have time to experiment with dozens of different formulas, until one of us stumbles on the correct one. I'm fairly certain that the formula you gave in post #3381 gives the same result as MT4's terminal, as I've used it before. If there are different margin requirements for different pairs, that override the leverage settings built into MT4, then I'd need to know all of them.
thanks,for try to helping

I will go play on major pairs and problem will solve
I didn't know it's turn into leverage 20:1 that's why I think margin used it's diff from free margin lol
5%
  • #3,388
  • Dec 23, 2013 11:54am Dec 23, 2013 11:54am
mabe these postings could help, not sure:
http://forum.mql4.com/35018#367042 (links to http://forum.mql4.com/32653/page5#331819 where the mq4-files are attached)
PM me with coding requests and I'll probably put you on my ignore list
  • #3,389
  • Dec 23, 2013 12:07pm Dec 23, 2013 12:07pm
Thanks Hanover, somehow you always come to the rescue, this is exactly what i was looking for.....Merry Christmas to you too and your fam...God bless.
  • #3,390
  • Dec 24, 2013 12:18am Dec 24, 2013 12:18am
Quoting chiragpandat
{quote} hello, can any one code for me its very simple but i dont know how to create it... THE LOGIC IS : 1) INDICATOR WORKS FOR FIRST ONE HOUR AFTER MARKET OPEN. 2) SET ALERT WHEN PRCIE NOT TOUCH IN ONE HOUR BETWEEN PIVOT POINT AND SUPPORT-1.........AND ........PIVOT POINT AND RESISTANCE-1 IF PRICE TOUCH ANY PIVOT LINE OR SUPPORT LINE IN FIRST ONE HOUR THEN NO ALERT. ....HERE IS INDICATOR WHICH I M USING FOR PIVOT POINT .. {file}
quite simple - the indicator checks if there is a new day according to PERIOD_D1 and checks if the previous hour was the hour specified in the settings.
There is no errordetection/adjustments - so if the hour you enter + 1 >23 it should not work.

The indicator checks after the hour if the pivot, r1 or s1 was hit - if not, it will give alerts (if all 3 not hit it will give 3 alerts at the same time, but we could change that), otherwise not.

pls. try
Attached File(s)
File Type: mq4 PivotuPointsq-lDailyy_Shifted.mod.mq4   14 KB | 431 downloads
PM me with coding requests and I'll probably put you on my ignore list
  • #3,391
  • Dec 24, 2013 7:05am Dec 24, 2013 7:05am
I need an EA in which i required all multipurpose pending orders. can you creat this EA for me free of cost
1. Sellstop-Buystop
2. Sell Limit- Buy limit
3. Stop Loss- Take profit
4. No. of buy stop orders / No. of sell stop orders
5. No.of buy limit orders / No. of sell limits orders
6. Distance of starting orders from the current market
7. Slippage of every trade

Thank you very much
  • #3,392
  • Dec 24, 2013 12:21pm Dec 24, 2013 12:21pm
I would like to say thank you to fxdaytrader and hanover for helping us out by coding our EAs and indicators. You guys rock. Enjoy the rest of the day/night where ever you are . And Happy Holidays to you all.
  • #3,393
  • Dec 24, 2013 4:13pm Dec 24, 2013 4:13pm
bro can you help me with this pleaase ??


is it possible to add automated (buy/sell) orders to this EA depending on RSI and STOCHASTIC crossover (rsi:8)(sto:14.3.3) levels (30--70) (20--80) ??
I need it to open buy call for example when RSI is below 30 and STO's both bands are below 20 (takes order when fast MA is crossed back over slow MA)"ascending"
so it opens trades on the right time and closes after profit target reached? please i need ur help

thanks in advance and Happy Holidays
"please reply"
Attached File(s)
File Type: mq4 close all positions at profit target.mq4   5 KB | 475 downloads
  • #3,394
  • Dec 24, 2013 4:29pm Dec 24, 2013 4:29pm
Quoting Mroue26
bro can you help me with this pleaase ?? is it possible to add automated (buy/sell) orders to this EA depending on RSI and STOCHASTIC crossover (rsi:8)(sto:14.3.3) levels (30--70) (20--80) ?? I need it to open buy call for example when RSI is below 30 and STO's both bands are below 20 (takes order when fast MA is crossed back over slow MA)"ascending" so it opens trades on the right time and closes after profit target reached? please i need ur help thanks in advance and Happy Holidays "please reply" {file}
If you mean me - The answer is NO, thanks.
The reason I have already explained at dec. 14 2013 here: http://www.forexfactory.com/showthre...64#post7156464


Maybe somebody else will help you, I will definitely not. And I am not a moron or dimwit, so usually I do not forget what I have said (except I am totally drunk ) ...
PM me with coding requests and I'll probably put you on my ignore list
  • #3,395
  • Dec 24, 2013 4:33pm Dec 24, 2013 4:33pm
Quoting Surinder
can you creat this EA for me free of cost
it is christmas time, so make people happy -> http://www.mql5.com/en/job
PM me with coding requests and I'll probably put you on my ignore list
  • #3,396
  • Dec 24, 2013 4:34pm Dec 24, 2013 4:34pm
Quoting johnmljacob
I would like to say thank you to fxdaytrader and hanover for helping us out by coding our EAs and indicators. You guys rock. Enjoy the rest of the day/night where ever you are . And Happy Holidays to you all.
You're welcome, have happy holidays, cheers

PM me with coding requests and I'll probably put you on my ignore list
  • #3,397
  • Dec 24, 2013 9:50pm Dec 24, 2013 9:50pm
Hi, bro, Merry Xmas!

could you help me with this idea?

I want to show the density of volume buy/sell on every price which can illustrate the support/residence(I think).

so

I choose 100 candle stick on my time frame.
for each candle stick, I calculate the density: D=volume/(H-L)
so I could sum up every density of the price (only sum up the density, if the price locates in the range(H-L) ).

B. Regards,
  • #3,398
  • Dec 25, 2013 7:12am Dec 25, 2013 7:12am
Quoting fxdaytrader_
{quote} If you mean me - The answer is NO, thanks. The reason I have already explained at dec. 14 2013 here: http://www.forexfactory.com/showthre...64#post7156464 Maybe somebody else will help you, I will definitely not. And I am not a moron or dimwit, so usually I do not forget what I have said (except I am totally drunk ) ...
im so sorry man, when i posted about turning profit target from $ to pips i was just asking if its possible and i didnt have that thought about rsi and sto auto calls please i just need this one its the first time i ask for something please just help me with this and im never gonna ask u for anything else
btw i didnt see your reply on dec. 14'th post till now
  • #3,399
  • Dec 25, 2013 7:31am Dec 25, 2013 7:31am
Quoting fxdaytrader_
{quote} If you mean me - The answer is NO, thanks. The reason I have already explained at dec. 14 2013 here: http://www.forexfactory.com/showthre...64#post7156464 Maybe somebody else will help you, I will definitely not. And I am not a moron or dimwit, so usually I do not forget what I have said (except I am totally drunk ) ...
ive never thought that some1 will reply on my threads so fast and i was still waiting for an email or some notification from forexfactory im new here and im sorry again fx_
  • #3,400
  • Dec 25, 2013 7:31am Dec 25, 2013 7:31am
is ok ...
maybe when I have sparetime and the fun to do it, but not today
PM me with coding requests and I'll probably put you on my ignore list
258 traders viewing now