Attachments: I will code your EAs and Indicators for no charge

I will code your EAs and Indicators for no charge

#2,441
Jun 5, 2013 10:02pm Jun 5, 2013 10:02pm

cyber1
Joined Jan 2011 | Status: Trader | 1,299 Posts

Quoting ~bull.bear~

Disliked

{quote} Thanks for your help. However, It seem like the calculation start from the 3rd bar of new signal because it is based on previous 1 and 2 bars. It is supposed to get the complete high low price at the 1st bar of new signal. Any suggestions? Appreciate.

Ignored

~bull.bear~
You will need to know when blue turns white and white turns blue, thats what the snippet of code will tell you. I would suggest using the snippet in an EA to understand how it works. Have it plot a Vertical Line at the point it gives a signal to buy and also at the signal to sell.

Once you can do that then you are ready to put the snippet in your indicator where you will need a while or for loop. In the indicator you will need to put the loop index var in to the iCustom call index where 1 and 2 are now. Then keep track of what the values of the Close are on one end of where your rectangles vs the other end. This will tell you if the trend is up or down.
I could do it for but then what would you learn.

#2,442
Jun 5, 2013 10:53pm Jun 5, 2013 10:53pm

~bull.bear~
Joined Sep 2012 | Status: Aim Consistent Income | 791 Posts

Quoting cyber1

Disliked

{quote} ~bull.bear~ You will need to know when blue turns white and white turns blue, thats what the snippet of code will tell you. I would suggest using the snippet in an EA to understand how it works. Have it plot a Vertical Line at the point it gives a signal to buy and also at the signal to sell. Once you can do that then you are ready to put the snippet in your indicator where you will need a while or for loop. In the indicator you will need to put the loop index var in to the iCustom call index where 1 and 2 are now. Then keep track of what...

Ignored

Yes. I want to learn this code. So I could tweak it for other purpose. Thanks for your input. I will take a test then.

#2,443
Edited 3:39am Jun 6, 2013 1:55am | Edited 3:39am

fairwind
| Joined Dec 2004 | Status: Trader | 140 Posts

Hi folks,

I have been looking for an indicator I was using in my old xP PC. The xP has crashed and I have managed to reclaim most of my favorite Indicators. But now I cant find one that looks like the pic attached, cant remember what it was called either !

What it does is "draw levels on last weeks H and L and draw levels on H and L of the last day of last week, projecting these four levels into this weeks blank space". I used it in H4 charts mainly.

Can anyone program this, or tell me where I can get it? Tnx to all who respond.

Attached Image (click to enlarge)

Click to Enlarge

Name: W+D HiLo.jpg
Size: 49 KB

Good Trading to All ---- fairwind

#2,444
Jun 6, 2013 5:18am Jun 6, 2013 5:18am

chinedu
| Joined Feb 2009 | Status: Trader | 37 Posts

Hi Fairwind, have some thing similar to it, try this H_Object. It will give you all the high and low that you need.

Attached File(s)

HL_Objects.mq4 10 KB | 614 downloads

#2,445
Jun 6, 2013 8:01am Jun 6, 2013 8:01am

recidiviste
| Commercial User | Joined May 2009 | 777 Posts

hello frds good afthernoon

here some info about the drummond dots & system ...

Attached File(s)

IntroductiontoDrummondGeometry.doc 165 KB | 1,165 downloads

BROKENGLISH

#2,446
Jun 6, 2013 8:01am Jun 6, 2013 8:01am

fairwind
| Joined Dec 2004 | Status: Trader | 140 Posts

Hi there chinedu, tnx for your response.

I do have the "HL Objects" indicator, I found that one in my search over the last two days. It's pretty close to what I was looking for. Athough I would be very pleased if someone could program the "draw levels on H and L of the last day of last week".

I will draw that part manually if I have to on the HL Objects.

Good Trading to All ---- fairwind

#2,447
Jun 6, 2013 12:12pm Jun 6, 2013 12:12pm

endroute
Joined Oct 2007 | Status: Trader | 534 Posts

I am looking for someone to modify an existing indicator, attached, to do the following. I am willing to pay for this.

1. only alert when the candle closes below the 35 sma
2. provide an audible alert within 30 seconds prior to the candle close if the alert conditions are met. So if the alert conditions are met anytime within 30 seconds to the candle close sound the alert and paint the arrow

Attached File(s)

Joshreverse.mq4 5 KB | 716 downloads

#2,448
Jun 6, 2013 2:14pm Jun 6, 2013 2:14pm

RaptorUK
Joined Jan 2008 | Status: Trader | 870 Posts

Quoting endroute

Disliked

I am looking for someone to modify an existing indicator, attached, to do the following. I am willing to pay for this. 1. only alert when the candle closes below the 35 sma 2. provide an audible alert within 30 seconds prior to the candle close if the alert conditions are met. So if the alert conditions are met anytime within 30 seconds to the candle close sound the alert and paint the arrow {file}

Ignored

2. can't be done . . . if there are no ticks in the last 50 seconds of the bar how will you get your alert within the last 30 seconds ? Indicators can't wait . . .

20 pips a day isn't too much to ask . . .

#2,449
Jun 6, 2013 11:07pm Jun 6, 2013 11:07pm

bsmile
| Joined Nov 2008 | Status: Trader | 78 Posts

I have this EA however the sl/tp does not work. Can someone fix it for me?

Attached File(s)

Fisher M11_EA.mq4 45 KB | 595 downloads

#2,450
Jun 6, 2013 11:58pm Jun 6, 2013 11:58pm

FXForLife
| Joined Apr 2010 | Status: Trader | 367 Posts

Hello, I need some help finishing the attached code.

As you can see from the code it is a martingale EA which doubles the lots traded per successive trade until a win is achieved.

I am a very amateur coder so please excuse all the errors.

Please see attached code for additional details to the strategy.

Thank You very much for your consideration..

Inserted Code

#include <stdlib.mqh>

   extern int myMagic = 10;
   
   extern double TakeProfit =100;
   extern bool   PartialClosing = True;
   extern int    TPDivide = 2;
   extern double StopLoss =20;  
   extern double BreakEvenStop =20;
   
   extern int    slippage=2;    
   extern int    shift=0; 

   extern double Lots = 0.01;
   extern double MaximumRisk = 1.0
   extern bool   FixedLot = false;
   
   extern int    OrderTriesNumber=25;

bool buysig,sellsig,closebuy,closesell; int lastsig,tries;


double LotsRisk(int StopLoss)  { 
   double lot=Lots;
//---- select lot size
   if (!FixedLot && (StopLoss > 0))
      lot=NormalizeDouble(AccountFreeMargin()*MaximumRisk*0.001/StopLoss,2);
   else
      lot=Lots;
//---- return lot size
   if(lot<0.01) lot=0.01;
   return(lot);
}

//+------------------------------------------------------------------+
//| Check for open order conditions                                  |
//+------------------------------------------------------------------+

   void CheckForSignals(datetime tradeopenbar) {

   int i,hstTotal=OrdersHistoryTotal();
   for(i=0;i<hstTotal;i++)
   {
   
   //FIRST LEVEL TRADE
  
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit>0); //selecting the last trade
   OrderSend(Symbol(),OP_BUY,SetLots,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit>0); //selecting the last trade
   OrderSend(Symbol(),OP_SELL,SetLots,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
   //SECOND LEVEL TRADE 2 X MULTIPLIER
  
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit>0); //selecting the second to last trade
   OrderSend(Symbol(),OP_BUY,SetLots*2,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit>0); //selecting the second to last trade
   OrderSend(Symbol(),OP_SELL,SetLots*2,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
   //THIRD LEVEL TRADE 4 X MULTIPLIER 
   
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit>0); //selecting the second to last trade
   OrderSend(Symbol(),OP_BUY,SetLots*4,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit>0); //selecting the third to last trade
   OrderSend(Symbol(),OP_SELL,SetLots*4,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
   //FOURTH LEVEL TRADE 8 X MULTIPLIER   
  
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit>0); //selecting the fourth to last trade
   OrderSend(Symbol(),OP_BUY,SetLots*8,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit>0); //selecting the fourth to last trade
   OrderSend(Symbol(),OP_SELL,SetLots*8,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
   //FIFTH LEVEL TRADE 16 X MULTIPLIER  
   
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit>0); //selecting the fourth to last trade
   OrderSend(Symbol(),OP_BUY,SetLots*16,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit>0); //selecting the fourth to last trade
   OrderSend(Symbol(),OP_SELL,SetLots*16,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
   //SIXTH LEVEL TRADE 32 X MULTIPLIER  
   
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit<0); //selecting the fourth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==5) && Profit>0); //selecting the fifth to last trade
   OrderSend(Symbol(),OP_BUY,SetLots*32,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit<0); //selecting the fourth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==5) && Profit>0); //selecting the fifth to last trade
   OrderSend(Symbol(),OP_SELL,SetLots*32,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
   //SEVENTH LEVEL TRADE 64 X MULTIPLIER  
   
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit<0); //selecting the fourth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==5) && Profit<0); //selecting the fifth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==6) && Profit>0); //selecting the sixth to last trade
   OrderSend(Symbol(),OP_BUY,SetLots*64,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit<0); //selecting the fourth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==5) && Profit<0); //selecting the fifth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==6) && Profit>0); //selecting the sixth to last trade
   OrderSend(Symbol(),OP_SELL,SetLots*64,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
   //EIGHTH LEVEL TRADE  
   
   if (Close[1]>Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit<0); //selecting the fourth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==5) && Profit<0); //selecting the fifth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==6) && Profit<0); //selecting the sixth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==7) && Profit>0); //selecting the seventh to last trade
   OrderSend(Symbol(),OP_BUY,SetLots*128,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,Yellow);
   {
   if (Close[1]<Open[1])
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==1) && Profit<0); //selecting the last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==2) && Profit<0); //selecting the second to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==3) && Profit<0); //selecting the third to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==4) && Profit<0); //selecting the fourth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==5) && Profit<0); //selecting the fifth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==6) && Profit<0); //selecting the sixth to last trade
   if ((OrderSelect(i,SELECT_BY_POS,MODE_HISTORY)==7) && Profit>0); //selecting the seventh to last trade
   OrderSend(Symbol(),OP_SELL,SetLots*128,Bid,slippage,Bid+StopLoss*Point,takeProfit,EAComment,myMagic,0,DeepPink);
   {
   
//+------------------------------------------------------------------+
//| Check for close order conditions                                 |
//+------------------------------------------------------------------+
   void CheckForClose()  {

   if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES)==false)  break;
   if(OrderMagicNumber()!=myMagic || OrderSymbol()!=Symbol()) continue;
   
   if TakeProfit=true OrderClose(OrderTicket(),OrderLots(),Bid,3,White); // if take profit or stop loss is reached, close order
   break;
   else
}

//+------------------------------------------------------------------+
//| Execute BreakEvenStop                                            |
//+------------------------------------------------------------------+

   void BreakEvenStop() {
   
   bool bres;
   double StopLoss;
   if ( BreakEvenStop > 2 ) {
   for (int i = 0; i < OrdersTotal(); i++) {
   if ( OrderSelect (i, SELECT_BY_POS) == false )  continue;
   if ( OrderSymbol() != Symbol() || OrderMagicNumber() != myMagic )  continue;
   if ( OrderType() == OP_BUY ) {
   if ( (Bid < OrderOpenPrice()+BreakEvenStop*Point) )  return;
   StopLoss = OrderOpenPrice();
   if ( StopLoss > OrderStopLoss() ) {
   bres=OrderModify (OrderTicket(), OrderOpenPrice(), StopLoss+1*Point, OrderTakeProfit(), 0, White);
   Sleep(3000);
   if (!bres) Print("Error Modifying BUY order : ",ErrorDescription(GetLastError()));
   }
   if ( OrderType() == OP_SELL ) {
   if ( (Ask > OrderOpenPrice()-BreakEvenStop*Point) )  return;
   StopLoss = OrderOpenPrice();
   if ( StopLoss < OrderStopLoss() ) {
   bres=OrderModify (OrderTicket(), OrderOpenPrice(), StopLoss-1*Point, OrderTakeProfit(), 0, White);
   Sleep(3000);
   if (!bres) Print("Error Modifying SELL order : ",ErrorDescription(GetLastError()));
   }
   return;
   
   
   }
   double RoundLots(string S, double P)
   {
   double value=P;
   double MinimalLot=0;
   MinimalLot=MarketInfo(S,MODE_MINLOT);
   if(MinimalLot<=0)
   {
   RefreshRates();
   return(-1);
   }
   value=MathFloor(P/MinimalLot)*MinimalLot;
   return(value);
   }
   
//+------------------------------------------------------------------+
//| Linear closing of position                                       |
//+------------------------------------------------------------------+

   void PartialClosingExe()
   {
   int Profit=0; 
   if(OrderType()==OP_BUY) Profit=MathRound((Bid-OrderOpenPrice())/Point);
   if(OrderType()==OP_SELL) Profit=MathRound((OrderOpenPrice()-Ask)/Point);
   if(Profit<=0) return;
   int PipStep=MathFloor(TakeProfit/TPDivide);
   if(PipStep<1) PipStep=1;
   if(PipStep>TakeProfit) PipStep=TakeProfit;
   double LotPercent=1.00/TPDivide;
   if(LotPercent>1.00) LotPercent=1.00;
   if(TPDivide>TakeProfit && TakeProfit>0) LotPercent=1.00/TakeProfit;
   double FirstPosition=LotsRisk(StopLoss);
   double CutLots=FirstPosition*LotPercent*MathFloor(Profit/PipStep);
   CutLots=RoundLots(Symbol(),CutLots);
   if(CutLots<=0) return;
   CutLots=CutLots-(FirstPosition-OrderLots());
   if(CutLots<=0) return;
   if(OrderLots()<CutLots) CutLots=OrderLots();
   if(OrderType()==OP_BUY) 
   OrderClose(OrderTicket(),CutLots,Bid,slippage,White);
   if(OrderType()==OP_SELL) 
   OrderClose(OrderTicket(),CutLots,Ask,slippage,White);
      
   return;
   }

   void start()  {
   static datetime TradeOpenBar;

   //---- check for history and trading
   if(Bars<100 || IsTradeAllowed()==false) return;

   //---- check for signals
   CheckForSignals(TradeOpenBar);
   
   //---- calculate open orders by current symbol
   if (CalculateCurrentOrders(Symbol())==0)
      TradeOpenBar = CheckForOpen(TradeOpenBar);
   else
      CheckForClose();
      
   BreakEvenStop();
   }
//+------------------------------------------------------------------+

#2,451
Jun 7, 2013 1:44am Jun 7, 2013 1:44am

recidiviste
| Commercial User | Joined May 2009 | 777 Posts

Happy Friday

Attached Image

from High Low student ...

BROKENGLISH

#2,452
Jun 7, 2013 2:46am Jun 7, 2013 2:46am

RaptorUK
Joined Jan 2008 | Status: Trader | 870 Posts

Quoting FXForLife

Disliked

Hello, I need some help finishing the attached code.

Ignored

http://forum.mql4.com/55999

20 pips a day isn't too much to ask . . .

#2,453
Jun 7, 2013 2:48am Jun 7, 2013 2:48am

RaptorUK
Joined Jan 2008 | Status: Trader | 870 Posts

Quoting bsmile

Disliked

I have this EA however the sl/tp does not work. Can someone fix it for me? {file}

Ignored

Does it work in the Strategy Tester ?

20 pips a day isn't too much to ask . . .

#2,454
Jun 7, 2013 7:18am Jun 7, 2013 7:18am

Pips4Fun
| Joined Dec 2010 | Status: Trader | 64 Posts

Quoting RedLineFred

Disliked

{quote} Pips, I think I figured it out. Try it and let me know if it works the way you wanted. Fred {file}

Ignored

Hi Fred,

Apologies for the late reply. Have had some serious connection problems since the request.

Your solution was spot-on! It's working fine in all TFs. Thank you ever so much.

God bless.

Pips

#2,455
Jun 7, 2013 8:24am Jun 7, 2013 8:24am

Jeff Park
| Joined Aug 2012 | Status: Trader | 5 Posts

HI - Does anyone know of an OCO which will work with an MA cross EA, so that the MA's crossing opens an order with a defined SL and then closes the order if the MAs then cross the opposite way and opens the reverse order ie if the first order is a buy the second would be a sell - and has an audio alert please?

Jeff

#2,456
Jun 7, 2013 9:39am Jun 7, 2013 9:39am

dedoctor
| Commercial User | Joined Aug 2012 | 79 Posts

Quoting thank you

Disliked

This is for dedoctor, Hi body, check your messages.

Ignored

Today is one of my worst days. Everything gone account gone. All fund gone and i am just left with nothing, really frustrating life for me now. Life is too wicked. Someone who promised to manage my account just blew it because I waited all long for you for our last discussion. I am running for security presently because the fund was borrowed from a friend and he needs it for urgent attention now. Where can I start now as the only thing on my mind now is going suicide route. No one to run to for help because trust has been destroyed on earth.

#2,457
Jun 7, 2013 12:51pm Jun 7, 2013 12:51pm

crazy5
| Joined Dec 2012 | Status: Trader | 14 Posts

Quoting dedoctor

Disliked

{quote} Today is one of my worst days. Everything gone account gone. All fund gone and i am just left with nothing, really frustrating life for me now. Life is too wicked. Someone who promised to manage my account just blew it because I waited all long for you for our last discussion. I am running for security presently because the fund was borrowed from a friend and he needs it for urgent attention now. Where can I start now as the only thing on my mind now is going suicide route. No one to run to for help because trust has been destroyed on earth....

Ignored

Hey there dedoctor,

Trust me, i understand where you;re coming from.
Been there, done that, lived through it. [not the borrowing though]

1stly i would like to stress again the number 1 rule in investment/gambling, USE MONEY YOU HAVE WHICH YOU CAN AFFORD TO LOSE !

2ndly, Having said that, you really gotta get a job 1st, at least you have monthly income coming in every month.
As for returning the money to your fren, go pawn some valuable stuff and pay back the pawn shop slowly.
Its those loan/pawn shop where they take valuables as a guarantee/collateral.
Then with your job, pay back the pawn shop monthly.

3rdly, who did you ask to manage your account? YOu and you alone is responsible for your account.

4th, How much did you lose exactly?

5th, was it because of the recent NFP release? i see that u posted 2 hours after the NFP. NFP normally follow with big movements. [in case u didnt know]

I know the feeling sucks, but life is much bigger than this. =)
Cheer up bud.

Noel

#2,458
Jun 7, 2013 2:51pm Jun 7, 2013 2:51pm

ZacharyRC
| Joined Nov 2010 | Status: Candle Sticks are KEWT!!;) | 70 Posts

Quoting dedoctor

Disliked

{quote} Today is one of my worst days. Everything gone account gone. All fund gone and i am just left with nothing, really frustrating life for me now. Life is too wicked. Someone who promised to manage my account just blew it because I waited all long for you for our last discussion. I am running for security presently because the fund was borrowed from a friend and he needs it for urgent attention now. Where can I start now as the only thing on my mind now is going suicide route. No one to run to for help because trust has been destroyed on earth....

Ignored

Go take a walk, sit in the grass, and breathe. Life is eating and breathing, we are the ones who make it complicated. Please enjoy yourself today. You deserve it and your worthwhile.

#2,459
Edited 9:07pm Jun 7, 2013 3:02pm | Edited 9:07pm

DrNoStopLoss
| Additional Username | Joined Mar 2013 | 317 Posts

Hello everyone,

Can someone please help me out. I have been trying to code this EA for the past few months now but it seems like every time I just screw it up. All I am looking for is an additional alert. Already email, alert, sound is there. What I need is a notification to be sent to my mobile mt4 so I get an alert every time. It seems like e-mail is to slow, alert I don't always hear, so it would be nice if I can get under emailAlerts option a "Notifications" with a True or False. If set to true no matter which Alert type I use 1.Tenkan crosses Kjiun, 2. Kijun crosses Price 3. Both a Notification will be sent to my mobile mt4. Anything would help as I have been trying to do this on my own for a few months as I am not a skilled programmer, which led me to this to be my only hope. Please let me knwo if you need anything else. Thanks.

Attached File(s)

Final Ichimoku.mq4 7 KB | 576 downloads

#2,460
Jun 7, 2013 11:17pm Jun 7, 2013 11:17pm

zorroz
| Joined May 2008 | Status: Trader | 161 Posts

Hi guys.

Just wondering if there is anyone who can help me with a very very simple job. Pretty much no major coding required.

All I want to do is change the name of an indicator to something I can customise.

So for example. At the moment if i add a stochastic then that appears written in the top of the indicator box along with the values. i'd like to be able to change the word stochastic to something of my own and no value appear written there. i want the indicator to remain functioning exactly the same and also the ability to change the values but just call it something different and when it appears on my chart no value appear. I also want the ability to change the name of it from time to time so i'd like an input box added.

I'd like it to be applied to stochastics, cci histogram, bollinger bands, and moving averages. so all in all four separate indicators that i can customise the name to and have no value showing in the top left corner when i apply it to a chart. I don't mind if the name ( whatever i choose it to be ) appears there but not the value.

can anyone help me with this simple request?

Any help would be greatly appreciated.

Have a great day

Z

Platform Tech
/
I will code your EAs and Indicators for no charge
Reply to Thread
- 1 121 122 Page 123 124 125 4112
- 1 Page 123 4112

256 traders viewing now, 5 are registered:

Invisible

Options

Similar Threads

I will code your EAs and Indicators for no charge