I will code your EAs and Indicators for no charge | Page 97 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #1,921
  • Mar 11, 2013 10:31am Mar 11, 2013 10:31am
Quoting kis
Sorry, I don't know what is the problem...

Oh... Is okay.


Now i dare not to trade in LIVE by using this broker "Instaforex". Might try other broker to see if problem is still the same.
Hopefully someone could advice for post 1910


Weird...... !!!
  • #1,922
  • Mar 11, 2013 10:34am Mar 11, 2013 10:34am
Quoting kis
Fisher is commented out:
Inserted Code
/*fisher>0 && */
. That means, it is not considered.
Ohh sorry I dont know about coding. I saw fisher word so asked.
  • #1,923
  • Mar 11, 2013 10:50am Mar 11, 2013 10:50am
Ok, I'll check.

Quoting manoj_3986
Dear Kis,

Please find attached renko that I am using. As per my understanding if I run EA on renko chart or 1min candlestick chart then it will give out put as per chart.


EA should be having following following features.

if one candle is made above 50days moving average then EA will go for buy with 10pips TP and 10pips SL.

if TP hit in this case then EA put another buy order with 10 pips TP and 10pips SL. And continue the same till the time TP hit.

if SL hit then EA will stop putting order.

Then once one candle is made below...
Keep It Simple
  • #1,924
  • Mar 11, 2013 11:29am Mar 11, 2013 11:29am
Quoting ~bull.bear~
1st issue.
Please see the picture below, the previous balance is (4993.84+14.56) and last balance is 5005.20.
Attachment


2nd issue.
Not this uploaded EA but using the same function "Profit()". Please take a look at the picture below. The value highlighted inside green rectangle is correct but for red rectangle is incorrect.
Weird! Take the trade 392. It is suppose to be 1.4715-1.4701=14 pips x 1.50 = +21 profit.
Attachment

I have done manual calculation in excel. Here is it. Very weird...
With this calculation:
Quote
1.4715-1.4701=14 pips x 1.50 = +21 profit.
you mean this lines?

Inserted Code
if(OrderType()==OP_BUY) reward+=((Bid-OrderOpenPrice())/point)*((OrderLots()/Min_Lots)+(point/10));
                  if(OrderType()==OP_SELL) reward+=((OrderOpenPrice()-Ask)/point)*((OrderLots()/Min_Lots)+(point/10));

If yes, I guess the 1.50 is the (OrderLots()/Min_Lots), right? But you didn't add +(point/10).
Keep It Simple
  • #1,925
  • Mar 11, 2013 11:34am Mar 11, 2013 11:34am
Quoting thank you
This is for kis, Hi kis, sorry for a delay, I wasn't home for one week, I was working. First, thank you so much again for the indi, it's working perfectly, you are the number one, there is only one thing, I was born earlier date, so I need the glasses, if I wanna read something, can you make the title long and short a little bigger, because I'm blind, and can you move it a little to right, because is exactly where market is. Thank you. I can't do that, I do not have any programmer skills.
Now, I keep my word, hit me with message, send me your...
Moved to the right.
Attached File(s)
File Type: ex4 LastClosedOrders.ex4   4 KB | 418 downloads
Keep It Simple
  • #1,926
  • Mar 11, 2013 11:36am Mar 11, 2013 11:36am
Quoting kis
You mean this, right?
Ok brother can you add this fisher indicator to Ea removing existing fisher.
Attached File(s)
File Type: mq4 Fisher_Yur4ik.mq4   2 KB | 526 downloads
  • #1,927
  • Mar 11, 2013 11:39am Mar 11, 2013 11:39am
Quoting kis
With this calculation: you mean this lines?

Inserted Code
if(OrderType()==OP_BUY) reward+=((Bid-OrderOpenPrice())/point)*((OrderLots()/Min_Lots)+(point/10));
                  if(OrderType()==OP_SELL) reward+=((OrderOpenPrice()-Ask)/point)*((OrderLots()/Min_Lots)+(point/10));

If yes, I guess the 1.50 is the (OrderLots()/Min_Lots), right? But you didn't add +(point/10).
THe code will calculate the basket opened position and get latest profit/lose value. My setting is above 10 pips in profit, all position will be closed.

However from the tester result as uploaded.
sell entry at 1.4715- close at 1.4701=+14 pips x 1.50 lots size = +21 profit that suppose to get in trade 392. But it is not. You can check the excel, i make the correct and incorrect calculation.

The rest of tester result is fine.
  • #1,928
  • Mar 11, 2013 11:41am Mar 11, 2013 11:41am
Just try other broker. Below is the result. Something wrong with the Instaforex broker.

The EA result should be like GFT broker. No drop down of equity amount. Please ignore the last DD.
Attached Image (click to enlarge)
Click to Enlarge Name: Untitled.png Size: 61 KB
  • #1,929
  • Mar 11, 2013 11:44am Mar 11, 2013 11:44am
Quoting MechoCola
Hello,

I was wondering if you could take the time to make an EA out of this indicator. Someone called Ggekko made it and it was on the mql4 codebase. In my visual backtesting, it's pretty good; it performs like a zigzag indicator but it doesn't repaint after the bar has closed. I have tried for a week to do it by myself using some tutorials online, but I have given up and decided to ask for help. I am not familiar with mt4 code so I am not sure what exactly it is doing to calculate things. Looks like maybe it's comparing the average of eight...
Hello again,

I'm sure you are pretty busy, but I hope you will consider working on this one next.

Here is its recent performance on a few pairs:

USDJPY: up 350 pips from Mar 1st
GPBUSD: up 780 pips from Feb 11th
EURUSD: up 200-ish pips from Feb 20th
USDCHF: up 265 pips from Feb 20th
NZDJPY: up 215 pips from Mar 5th

Total for these pairs: 1810 in less than a month

It works best at catching big trends. Average trade length in h4 is probably about a month depending on pair. Losing trades happen too, with lots of whipsaws in consolidation zones. Haven't thought of how to counter this yet, but they are usually about 30 pips per loser and at least 200 pips per winner so not a bad ratio. Lower time frames than h4 or h1 would probably not end up being profitable because it whipsaws constantly. Higher tfs are better. Can also be used with renko charts, in which case the maximum loss would be 2x the renko size + spread. Less whipsaws too with renko.

Anyway, hope you can take a look at it and have a try for me. I can pay you with an Amazon gift card
Attached File(s)
File Type: mq4 JJN-Nugget.mq4   5 KB | 693 downloads
  • #1,930
  • Mar 11, 2013 11:46am Mar 11, 2013 11:46am
Quoting mpradeep
Ok brother can you add this fisher indicator to Ea removing existing fisher.
As I remember I sent you the mq4 file. Please try to find double fisher=iCustom(NULL, 0, "Fisher",30,0,0); and replace "Fisher" with the exact filename of the other fisher indicator.

If it doesn't work, let me know.
Keep It Simple
  • #1,931
  • Mar 11, 2013 11:51am Mar 11, 2013 11:51am
Quoting kis
As I remember I sent you the mq4 file. Please try to find double fisher=iCustom(NULL, 0, "Fisher",30,0,0); and replace "Fisher" with the exact filename of the other fisher indicator.

If it doesn't work, let me know.
Ok let me try
  • #1,932
  • Mar 11, 2013 11:54am Mar 11, 2013 11:54am
Quoting kis
As I remember I sent you the mq4 file. Please try to find double fisher=iCustom(NULL, 0, "Fisher",30,0,0); and replace "Fisher" with the exact filename of the other fisher indicator.

If it doesn't work, let me know.

I have changed allready where 'fisher' word was there with new fisher. But not taking order. Please chk below.

int target;
double stop;
double fisher_Yur4ik=iCustom(NULL, 0, "Fisher_Yur4ik",30,0,0);
double fisher_Yur4ik2=iCustom(NULL, 0, "Fisher_Yur4ik",30,1,0);
double fisher_Yur4ik3=iCustom(NULL, 0, "Fisher_Yur4ik",30,2,0);
double bollBSV2_blue=iCustom(NULL, 0, "Bollinger Bands_Stop_v2 ",20,1,1,1,1,1000,false,0,0);
double bollBSV2_red=iCustom(NULL, 0, "Bollinger Bands_Stop_v2 ",20,1,1,1,1,1000,false,1,0);
double has_1=iCustom(NULL, 0, "Heiken_Ashi_Smoothed (1)",2,6,3,2,0,0);
double has_2=iCustom(NULL, 0, "Heiken_Ashi_Smoothed (1)",2,6,3,2,1,0);
double has_3=iCustom(NULL, 0, "Heiken_Ashi_Smoothed (1)",2,6,3,2,2,0);
double has_4=iCustom(NULL, 0, "Heiken_Ashi_Smoothed (1)",2,6,3,2,3,0);
//if (fisher_Yur4ik>0) Print ("Fisher_Yur4ik0 above 0: ", fisher_Yur4ik, " F2: ", fishe_Yur4ikr2, " F3: ", fisher_Yur4ik3);
//if (fisher_Yur4ik<0) Print ("Fisher_Yur4ik0 below 0: ", fisher_Yur4ik, " F2: ", fisher_Yur4ik2, " F3: ", fisher_Yur4ik3);
//if (bollBSV2_red>-1) Print ("Bollinger Bands_Stop_v2_red: ", bollBSV2_red);
//if (bollBSV2_blue>-1) Print ("Bollinger Bands_Stop_v2_blue: ", bollBSV2_blue);
//if (has_3>has_4) Print ("Heiken_Ashi_Smoothed_1: Red");
//if (has_3<has_4) Print ("Heiken_Ashi_Smoothed_1: Blue");
//Print ("Red: ", fisher_Yur4ik, " Green: ", fisher_Yur4ik2, " Blue: ", fisher_Yur4ik3);
int total=total_open(magic_number);
if (total==1)
  • #1,933
  • Mar 11, 2013 12:04pm Mar 11, 2013 12:04pm
Quoting mpradeep
I have changed allready where 'fisher' word was there with new fisher. But not taking order. Please chk below.

int target;
double stop;
double fisher_Yur4ik=iCustom(NULL, 0, "Fisher_Yur4ik",30,0,0);
double fisher_Yur4ik2=iCustom(NULL, 0, "Fisher_Yur4ik",30,1,0);
double fisher_Yur4ik3=iCustom(NULL, 0, "Fisher_Yur4ik",30,2,0);
double bollBSV2_blue=iCustom(NULL, 0, "Bollinger Bands_Stop_v2 ",20,1,1,1,1,1000,false,0,0);
double bollBSV2_red=iCustom(NULL, 0, "Bollinger Bands_Stop_v2 ",20,1,1,1,1,1000,false,1,0);
double has_1=iCustom(NULL,...

Seems now it is working, Actually in Ea period was 30 but in indicator period was 22 . So when I changed to 22 order taken as I need 22 seting.

I need one more help.
Can u give me mql file of fisher no repaing Ea what u sent. So I can edit if i feel necessary.

Thanks for your help
  • #1,934
  • Mar 11, 2013 12:10pm Mar 11, 2013 12:10pm
Quoting mpradeep
I have changed allready where 'fisher' word was there with new fisher. But not taking order. Please chk below.

int target;
double stop;
double fisher_Yur4ik=iCustom(NULL, 0, "Fisher_Yur4ik",30,0,0);
double fisher_Yur4ik2=iCustom(NULL, 0, "Fisher_Yur4ik",30,1,0);
double fisher_Yur4ik3=iCustom(NULL, 0, "Fisher_Yur4ik",30,2,0);
double bollBSV2_blue=iCustom(NULL, 0, "Bollinger Bands_Stop_v2 ",20,1,1,1,1,1000,false,0,0);
double bollBSV2_red=iCustom(NULL, 0, "Bollinger Bands_Stop_v2 ",20,1,1,1,1,1000,false,1,0);
double has_1=iCustom(NULL,...
if you see something like: if (/*fisher_Yur4ik2<0 && */bollBSV2_red>-1 && has_3>has_4) closeall(magic_number); Please remove the "/*" and the "*/" from: /*fisher_Yur4ik2<0 && */.
Keep It Simple
  • #1,935
  • Mar 11, 2013 12:37pm Mar 11, 2013 12:37pm
Quoting kis
I modified EA to use Fisher_no_repainting, indicator must be in expert/indicators folder, with exactly the same name.
I'm not sure if this will help, please test.
Kindly give this mql file of this EA or can u changer fisher no repainting to period 10.
  • #1,936
  • Mar 11, 2013 7:55pm Mar 11, 2013 7:55pm
Hi Kis,

I happen to see and tested the EA named "Incognito Mod EA" and so far it looks great. Can I have add few changes here.

Some features that would be nice is

1. Pips instead of Price – For positions 1 thru 4 on the EA, instead of putting a price for “hidden sl” and “hidden tp” can you make it to pips. If I wanted to place a 100 pip SL I would just input 100 (1000 for 5 digit broker) and if I wanted a 125 TP I would just put 125. (1250 for 5 digit broker) The EA would place the TP and or SL according to the orders made on the script, BUYS or SELLS. Placing the price for “hidden sl” and “hidden tp” is time consuming and I have to use a calculator. It would be easier if the EA could just figure out the price based on if the order(s) were a BUY or SELL.
2. Automatic Magic Number – Would be nice if the EA could come up with a Magic Number Automatically and then correspond it with the orders (Multiple Orders or Pending Multiple Orders script). So if I made 3 BUYS or 3 pending BUYS on the script the EA would know to come up with 3 magic numbers and input them in the EA. If I had 4 SELLS or 4 pending SELLS on the script the EA would automatically create and input the magic number.
3. Buy or Sell – Instead of typing in Buy or Sell in the Multiple Orders script, it would just have a drop down list to choose either Buy or Sell. Just like under open_position there is a drop down list for True or False. This would save time when placing an order.
This would be the first 2 changes that I would make to the Incognito EA because it would be much easier and faster to use. I would still like to add Trailing Stops, Break evens, etc, but we can start with these 2 changes first and work our way into it.

Thanks Kis.
  • #1,937
  • Mar 12, 2013 12:01am Mar 12, 2013 12:01am
Hello,

I found this indicator on another forum and it seems to do exactly what I want it to do: send me an email when an order opens or closes on my MT4 (on a VPS).

It does not function entriely properly though; it sends an email when a buy order happens and it also sent a repeat of the same email later. My coding skills are not good enough to spot the error but at face value it "seems" to do everything I am looking for. Would some kind person please look at this with a view to correcting the errors. I'm sure this could be useful to many when working properly.
Attached File(s)
File Type: mq4 OpenClose-Trade-Alert.mq4   5 KB | 569 downloads
  • #1,938
  • Mar 12, 2013 1:15am Mar 12, 2013 1:15am
i have a great system i want to code in to expert i am willing to share it to any one that help make it a good expert but i need the source code to be well done so i can adjust in my own to some special criteria i am serious i have a great wining system and i want to make it an expert please advice me
have a nice day
focus while relaxed to see better
  • #1,939
  • Mar 12, 2013 4:00am Mar 12, 2013 4:00am
Quoting orabi
i have a great system i want to code in to expert i am willing to share it to any one that help make it a good expert but i need the source code to be well done so i can adjust in my own to some special criteria i am serious i have a great wining system and i want to make it an expert please advice me
have a nice day
Ask KIS he will help you, He is a grt guy.
  • #1,940
  • Edited 9:46am Mar 12, 2013 4:08am | Edited 9:46am
First I want to say a big thank you to all the programmers in the house here...not easy lol. The indicator am talking about has not been produced before although some are closed to it but totally different from what I want and what suit my trading style.
Please I need help in coding the following horizontal lines on mt4.
Features
1. Ability to select time in GMT but by default should be GMT+1
2. Ability to choose which lines should appear on chart. Default should be all.
3. Ability to select line color.
4. Line should scroll to a period of 5 years as default and should be changed to any value on indy menu.
5. Each line should have separate line color easily identified on a chart.
6. Line should have a small title and price at the right end of line as demonstrated on the chart below
7. Title should not fade when scrolling back in months and years.
8. Ability to choose a preferred session (London, Newyork) as the close or open price for my daily and weekly open and change them accordingly. That's London as open or Newyork as Close and vice versa
9. Lines should be visible and same on any timeframe

Details
- Daily open
- Previous day open
- Previous day high
- Previous day low
- Previous day close
The same is true for weekly close making a total of 10 lines
I will appreciate whoever that code this into indy. The chart attached is a sample of this explanation. Thanks a lot.
Attached Image
190 traders viewing now, 2 are registered:
aspiring91
,
Jeffo