I will code your EAs and Indicators for no charge | Page 74 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #1,461
  • Jan 18, 2013 9:02am Jan 18, 2013 9:02am
Quoting EMA-trader
Dear Cyber1
I saw you responsed everybody who requested something, but not to me. Very sorry about it. I think my poor English or newbie manner can't competely descripe my eager for the script and grateful for you.

Regards
EMA-TRADER
EMA-TRADER-
Well not everybody. And your English is fine. It's just when I read through your description it's more involved than I want to get without something more decisive. For example, if you could provide a screenshot or several screenshots of something similar. Or if you have an EA that's close to what you want and just need some modification.
I don't mind helping somebody but if it's not clear what you want and I spend a lot of time on what I think you want only for you to come back and say that's not what I wanted.
  • #1,462
  • Jan 18, 2013 9:16am Jan 18, 2013 9:16am
Cyber1,

Sorry to bother you during trading hours. Thanks for all your help in learning how to hack away at this code stuff. I have everything working pretty good so far.

The arrows stay put now but now get ran over by the candles. It is very hard to see the candle with the arrow right on top. LOL

I have the code below setting the arrow. Is there a way for the arrow to move with the candles H/L +/- as it is moving?

{ Alert("proFX-BOT (",Symbol(), ", ", Period(), ") - SELL/PUT");
dDownBuffer[ii] = High[ii] + 10 * MarketInfo(Symbol(),MODE_POINT);

Thanks again.

LaoShr
  • #1,463
  • Jan 18, 2013 9:23am Jan 18, 2013 9:23am
Quoting laoshr
Cyber1,you


Sorry to bother you during trading hours. Thanks for all your help in learning how to hack away at this code stuff. I have everything working pretty good so far.

The arrows stay put now but now get ran over by the candles. It is very hard to see the candle with the arrow right on top. LOL

I have the code below setting the arrow. Is there a way for the arrow to move with the candles H/L +/- as it is moving?

{ Alert("proFX-BOT (",Symbol(), ", ", Period(), ") - SELL/PUT");
dDownBuffer[ii] = High[ii] + 10 * MarketInfo(Symbol(),MODE_POINT);

Thanks...
LaoShr-
Before we get to that have you checked to make sure these arrows are staying in place. Additional testing has made me a little bit suspicious that they're not. Here's how you check it.
Manually put an arrow above each down arrow or a rectangle or something so that you know where it was then shut down your platform and start up again and see if they're still in the same place, make sure you're still in the same timeframe.

As far as your question goes you could place it on a previous bar:

dDownBuffer[ii] = High[ii+1] + 10 * MarketInfo(Symbol(),MODE_POINT);

or you would have to check at the open of each bar where the last arrow is in relation to the high or low and then reposition it.
  • #1,464
  • Jan 18, 2013 9:24am Jan 18, 2013 9:24am


(a) Thank you so much for finding the time to assist us non-coders in fixing or remodelling these indicators.

(b) I have been using CCfp indicator as a currency strength meter for a while now. The original concept was built on trading the currencies with larger CC differences on larger tf like 4hrs. On intra day tf such as 15m n lower its better to catch the trend when it starts developing (see white arrow on EUR and JPY-attachment 1)

(c) Finding these diverging currencies in real time is not an easy job. This is why i started making use of the values from the data window(see pink arrow attachment 1) to tell when the currency lines start diverging away from/towards each other. At first i thought it was possible to export these data window values to excel(maybe its still possible)but i'd given up on that.

(d) What i do is to input these data window values (*100000) on excel (see attachment 2). On the LHS(before the orange line) is the actual data window values(*100000) under the time it was determined and on the RHS is the difference between subsequent closed candles' data window values i.e (as an example) data window value for blue dotted candle minus data window value for lime dotted candle in attachment 1.

(e) I consider a currency as diverging if the difference displays 2 consecutive positive or 2 consecutive negative numbers(see attachment 3). Lastly, i pair the currencies with positive differences with those with negative.

In attachment 3, EUR (with 2 consecutive positive differences) started diverging away from JPY (with 2 consecutive negative differences) at 9:30 GMT+1 yesterday to produce this trade (see attachment 4)

At 9:30 GMT+1 this morning (see attachment 1), CAD (pink line) started diverging (with 2 consecutive negative differences) from CHF (white line) with 2 consecutive positive differences to produce this trade (see attachment 5) which is still on as i write this piece.

Its exhausting having to export these values manually to excel and have it do the calculations for me to determine those with consecutive differences. I will be eternally grateful to anyone who could modify the CCFp indicator attached below to-

1. Calculate the differences as explained in paragraph (c) above (it may/may not use the *100000 as this helps me see the values clearer)
2. Determine the currencies with 2 consecutive positive/negative values as explained in paragraph (e) above (see NB below for exceptions)
3. Pair currencies with 2 consecutive positive differences with those that have 2 consecutive negative differences
4. Suggest the pairs that meet condition 3 above

Can you include a function that allows the user select currency pairs? If so that would be lovely..................

NB
In attachment 6, you find differences that are separated by zero/zeros'. I want the modified CCFp indicator to consider the currency to have met condition 2 above immediately the second value occurs i.e according to attachment 6 at 2:20 (red circle) and 3:40 (blue circle)

Please all calculations should be done on closed candle values as i noticed the values after candle close differ from those while the candle is forming.......Also the currency lines need refreshing after every candle close due to distortion of the lines which i hope will not affect the currency pair-suggestion function of the modified indicator.

Thank you in advance
Attached Image(s) (click to enlarge)
Click to Enlarge Name: ccfp.gif Size: 102 KB
Click to Enlarge Name: excel1.jpg Size: 505 KB
Click to Enlarge Name: excel2.jpg Size: 134 KB
Click to Enlarge Name: ej1.jpg Size: 320 KB
Click to Enlarge Name: cadchf.gif Size: 117 KB
Click to Enlarge Name: excel3.jpg Size: 223 KB
  • #1,465
  • Jan 18, 2013 9:38am Jan 18, 2013 9:38am
Quoting cyber1
LaoShr-
Before we get to that have you checked to make sure these arrows are staying in place. Additional testing has made me a little bit suspicious that they're not. Here's how you check it.
Manually put an arrow above each down arrow or a rectangle or something so that you know where it was then shut down your platform and start up again and see if they're still in the same place, make sure you're still in the same timeframe.

As far as your question goes you could place it on a previous bar:

dDownBuffer[ii] = High[ii+1] + 10 * MarketInfo(Symbol(),MODE_POINT);

or...
It seems that if the logic is the same and hasn't change before opening up the platform again the arrows are then recalculated to the new H/L of the bar. So if the bar was moving against the arrow (bar moving up and a down arrow above it) and reopen the platform it is recalculating where to place it (high[ii} + 10).

If you don't refresh the platform and the candle is moving against the arrow it just runs it over. LOL

I logic is really setup for that bar only and not as a direction indicator. So the previous bar I don't think will work.

I think I've seen it before (I've been searching the internet for it) is the arrow plots on the chart and if the H/L changes in relation to the arrow it will reposition higher or lower (example: if a red arrow is plotted over the bar to indicate going down but then the bar reverses and moves up. The arrow gets ran over by the candle.)

I hope that helps explain my problem.

Thanks for your help.

LaoShr
  • #1,466
  • Jan 18, 2013 9:48am Jan 18, 2013 9:48am
The CCFp indicator....Thanks once again
Attached File(s)
File Type: mq4 CCFp_v1.0.2bvert.mq4   25 KB | 730 downloads
  • #1,467
  • Jan 18, 2013 9:58am Jan 18, 2013 9:58am
Quoting laoshr
It seems that if the logic is the same and hasn't change before opening up the platform again the arrows are then recalculated to the new H/L of the bar. So if the bar was moving against the arrow (bar moving up and a down arrow above it) and reopen the platform it is recalculating where to place it (high[ii} + 10).

If you don't refresh the platform and the candle is moving against the arrow it just runs it over. LOL

I logic is really setup for that bar only and not as a direction indicator. So the previous bar I don't think will work.

I...
LaoShr-
But because you've taken away the ability to calculate on each tick then it's not going to readjust regardless of what that bar does. As you said if it was placed in a position where the bar eventually goes over top of it before it closes then your arrow gets ran over by the bar.
You wanted to only evaluate at the beginning of the bar and that was the last bit of code that we put in a few days ago. I'm not saying it's not possible but if you're going to readjust again before the bar closes then why not stay with Each Tick mode?

And what I meant about checking on the opening of each bar if the previous bar had the arrow run over it is if you would just do a simple check to see where its location is.
And I haven't tested this but just off the top of my head this is what I was thinking.

if(dDownBuffer[ii+1] < (High[ii+1] + 10 * MarketInfo(Symbol(),MODE_POINT)){

dDownBuffer[ii+1]=High[ii+1] + 10 * MarketInfo(Symbol(),MODE_POINT);

}
  • #1,468
  • Jan 18, 2013 10:21am Jan 18, 2013 10:21am
Quoting cyber1
LaoShr-
But because you've taken away the ability to calculate on each tick then it's not going to readjust regardless of what that bar does. As you said if it was placed in a position where the bar eventually goes over top of it before it closes then your arrow gets ran over by the bar.
You wanted to only evaluate at the beginning of the bar and that was the last bit of code that we put in a few days ago. I'm not saying it's not possible but if you're going to readjust again before the bar closes then why not stay with Each Tick mode?

And...
It seemed that with each tick mode the arrows were repainting too much. So, I wanted to not have that happen so you helped me change the code. I like that the candles don't repaint. I did change the code a bit so maybe I'll try putting the old bar code back in and see if they still repaint a lot.

In regards to the code you just sent. I'm not sure I'm putting in correctly. I get a error of end of program - unbalanced left parenthesis.

Thanks again.
  • #1,469
  • Jan 18, 2013 10:28am Jan 18, 2013 10:28am
Very exciting to see your post. kindly please see attached snapshot. I just want to modify those EMA date to:

Daily_EMA_50_High, Daily_EMA_50_Low. Daily_EMA_100_High, Daily_EMA_100_Low. Daily_EMA_200_High, Daily_EMA_200_Low. Weekly_ema_10_high and weekly_ema_10_low. Weekly_ema_30_high and weekly_ema_30_low.

Attached SimpleEMAv2.mp4 was downloaded in a thred in FF. Those lines were drawn by the file. This file has a bug, those line can't stick on the right of Higher TF chart. When open Weekly chart, those lines will overlap on candels.


Is it possible to code? Is it possible to change EMA parameters by trader?


















Quoting cyber1
EMA-TRADER-
Well not everybody. And your English is fine. It's just when I read through your description it's more involved than I want to get without something more decisive. For example, if you could provide a screenshot or several screenshots of something similar. Or if you have an EA that's close to what you want and just need some modification.
I don't mind helping somebody but if it's not clear what you want and I spend a lot of time on what I think you want only for you to come back and say that's not what I wanted.
Attached Image (click to enlarge)
Click to Enlarge Name: untitled.PNG Size: 17 KB
Attached File(s)
File Type: mq4 SimpleEMAv2.mq4   13 KB | 775 downloads
  • #1,470
  • Jan 18, 2013 11:33am Jan 18, 2013 11:33am
Quoting EMA-trader
Very exciting to see your post. kindly please see attached snapshot. I just want to modify those EMA date to:

Daily_EMA_50_High, Daily_EMA_50_Low. Daily_EMA_100_High, Daily_EMA_100_Low. Daily_EMA_200_High, Daily_EMA_200_Low. Weekly_ema_10_high and weekly_ema_10_low. Weekly_ema_30_high and weekly_ema_30_low.

Attached SimpleEMAv2.mp4 was downloaded in a thred in FF. Those lines were drawn by the file. This file has a bug, those line can't stick on the right of Higher TF chart. When open Weekly chart, those lines will overlap on candels.


Is...
EMA-trader-
I have made the requested changes. Let me know if you need anything further.
Attached File(s)
File Type: mq4 SimpleEMAv2_mod.mq4   14 KB | 641 downloads
  • #1,471
  • Jan 18, 2013 12:16pm Jan 18, 2013 12:16pm
Quoting laoshr
It seemed that with each tick mode the arrows were repainting too much. So, I wanted to not have that happen so you helped me change the code. I like that the candles don't repaint. I did change the code a bit so maybe I'll try putting the old bar code back in and see if they still repaint a lot.

In regards to the code you just sent. I'm not sure I'm putting in correctly. I get a error of end of program - unbalanced left parenthesis.

Thanks again.

laoshr-

If you increment the loop and start at 1 instead of 0 it should not repaint.

Corrected code:
Inserted Code
if(dDownBuffer[ii+1] < (High[ii+1] + 10 * MarketInfo(Symbol(),MODE_POINT))){

dDownBuffer[ii+1]=High[ii+1] + 10 * MarketInfo(Symbol(),MODE_POINT);

}
  • #1,472
  • Jan 18, 2013 12:29pm Jan 18, 2013 12:29pm
Quoting cyber1
kirikou-
Seeing as nobody has done it yet and I'm only speaking for myself but if you were to do your own research instead of listing three or four links to examples and then post here what it is you want, it would be much easier for a coder to translate your request into mq4 code.
But then on the other hand you might get lucky and somebody who has a lot of time on their hands will do it for you. Personally, if I see a request that only will take me an hour at the most I'll jump on it but if it's going to take me half a day just to do research...
Hi, i've done my own research but there's no mq4 version of this indicator, in one of my link there's the full code for amibroker, wich i can't translate into mq4.

Here's the code for amibroker :

paramLenRSI = Param("RSI Closes Length", 3, 2, 100, 1);
paramLenUD = Param("RSI UpClose Length", 2, 2, 100, 1);
paramLenRank = Param("PerecentRank Length", 100, 10, 200, 1);

function ConnorsRSI(lenRSI, lenUD, lenROC)
{
upDays = BarsSince(C <= Ref(C,-1));
downDays = BarsSince(C >= Ref(C,-1));
updownDays = IIf(upDays > 0, upDays, IIf(downDays > 0, -downDays, 0));
crsi = ( PercentRank(ROC(C,1), lenROC) + RSIa(updownDays,lenUD) +
RSI(lenRSI))/3;
return crsi;
}

Plot( ConnorsRSI(paramLenRSI,paramLenUD,paramLenRank)
, "ConnorsRSI("+paramLenRSI+","+paramLenUD+","+paramLenRank+")"
, colorBlue, styleLine, 0, 100);

there's probably a code for wealth lab here : http://www2.wealth-lab.com/WL5Wiki/ConnorsRSI.ashx
but since i don't know how to code wealth lab i can't tell.

The indicator look simple, but i'm not sure if it's easy to code since i don't know how to code mq4.
  • #1,473
  • Jan 19, 2013 7:35pm Jan 19, 2013 7:35pm
Hi,
anyone knows of an indicator that draws text in a subwindow and the text should stay with the chart ( and not just visible in the past )?

I have one that draws text in the main-chart with corner settings as well.
But I like to see the text in the subwindow.
So I attach the Indicator here.
Maybe some Coder could modify this helping Indi.
Green pips to all.
Greeds Zack
Attached File(s)
File Type: mq4 TRO_MyNotes.mq4   7 KB | 519 downloads
  • #1,474
  • Jan 19, 2013 8:23pm Jan 19, 2013 8:23pm
Quoting zackery
Hi,
anyone knows of an indicator that draws text in a subwindow and the text should stay with the chart ( and not just visible in the past )?

I have one that draws text in the main-chart with corner settings as well.
But I like to see the text in the subwindow.
So I attach the Indicator here.
Maybe some Coder could modify this helping Indi.
Green pips to all.
Greeds Zack
Zack-
I've added the user input WhichWindow. Too bad Avery didn't put it in when he originally coded it.
Attached File(s)
File Type: mq4 TRO_MyNotes.mq4   6 KB | 520 downloads
  • #1,475
  • Jan 20, 2013 1:14am Jan 20, 2013 1:14am
Cross to Cross Trading Strategy

Hi,
I know that many of EA coders help them who want helping. I have needed an EA on below strategy including RSI+MA indicator. Hope that I won’t be hopeless. Thanks.

Elements:
1. RSI (9) + EMA (5) (in one window)
2.RSI cross the EMA from above entry a sell order, RSI cross the EMA from below exit the sell order and entry a buy order, exit the buy order after crossing the EMA by RSI from above. To be continued.
3.RSI period
4.EMA period
5.Lot Size
6.Stop loss
7.Take profit
8.Crossing Alert
Attached Image (click to enlarge)
Click to Enlarge Name: RSI_Cross_EMA.jpg Size: 153 KB
Attached File(s)
File Type: mq4 RSI+MA.mq4   6 KB | 807 downloads
  • #1,476
  • Jan 20, 2013 7:33am Jan 20, 2013 7:33am
@cyber1:
Many thanks for your effort and thanks that there are some Coders out there that help us Nerds with this.
Greeds Zack
  • #1,477
  • Jan 20, 2013 12:22pm Jan 20, 2013 12:22pm
I have another quick request if anyone wouldn't mind helping out.

I'd just like an indicator that could display the average range of a selectable timeframe for whatever pair the indicator was attached to (for a selectable number of bars/time).

If possible, it'd be even more awesome if you could have a way to display average candle; that is the average body and wick lengths all together. I think this might be possible by using the different OHLC factors.

If it's even more possible, having the indicator put out a picture of the actual average candle would be amazing. Any help is seriously appreciated.

Thanks!


NOTE: These would be non-directional. Just average movement in candle form regardless of which direction that ended up being.
  • #1,478
  • Edited 6:30pm Jan 20, 2013 5:32pm | Edited 6:30pm
Hello,

I was looking for a following script but couldnt find one, so I would greatly appreciate if anyoune could help, its very simple for somebody who can code. The script should move SL for all orders on a given chart 3 pips above last finished bar for shorts / below for longs. No matter whether in profit or not. Anyone? If coding timeframe recognition would complicate it too much then just make it for 1hr pls. TF recognition would be nice though.


Many pips,

JK


P.S. Id like it to work exactly like the script attached, but instead of placing SL at the spot where droped on the chart - 3 pips above / below most recently closed bar.
Attached File(s)
File Type: mq4 A-SL.mq4   2 KB | 523 downloads
  • #1,479
  • Jan 20, 2013 7:40pm Jan 20, 2013 7:40pm
Quoting Jkdt
Hello,

I was looking for a following script but couldnt find one, so I would greatly appreciate if anyoune could help, its very simple for somebody who can code. The script should move SL for all orders on a given chart 3 pips above last finished bar for shorts / below for longs. No matter whether in profit or not. Anyone? If coding timeframe recognition would complicate it too much then just make it for 1hr pls. TF recognition would be nice though.


Many pips,

JK


P.S. Id like it to work exactly like the script attached, but instead...
Jkdt-
Try this one. If it needs any modifications let me know.
http://www.forexfactory.com/showthre...01#post6045001
  • #1,480
  • Jan 20, 2013 8:50pm Jan 20, 2013 8:50pm
Cyber1,

Thank you very much for your quick reply. However that is not what I am looking for. The link you provided leads to a trailing EA, where I need a script for manual aplication. I dont think I can put it any clearer than in my previous post.

All the best,

JK
145 traders viewing now, 1 is registered:
saoco111