I will code your EAs and Indicators for no charge | Page 40 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #781
  • Apr 16, 2012 4:11am Apr 16, 2012 4:11am
Thanks Cyber1.



Quoting cyber1
I do not know enough about Renko charts to say why it does not work.
Other indicators like MA's work fine.

Hopefully somebody else will have a solution. There are lots of threads here on FF on the subject.
Good Luck.
  • #782
  • Apr 16, 2012 4:13am Apr 16, 2012 4:13am
Can someone help me out? ... Pls ....

  • #783
  • Apr 16, 2012 5:21am Apr 16, 2012 5:21am
  •  FerruFx
  • Joined May 2007 | Status: MT4/MT5 EAs/Indicators/Alerts coder | 6,542 Posts | Online Now
Quoting bdunn
Can someone help me out? ... Pls ....

I checked your spread indicator. It is compatible with your .arm symbols.

Please close all your charts, restart your platform. Then open a M1 chart, then set and attach your renko script on, then open the offline chart.

Then check in the expert and journal tab if you have error messages.
MT4/MT5 EAs/Indicators/Alerts coder
  • #784
  • Apr 16, 2012 6:52am Apr 16, 2012 6:52am
FerruFx, I did what you said and things just don't work. I attached two spread indicators and both failed to work. No error msg on journal tab.

I am using the following script to generate renko chart.

Advise?.....






Quoting FerruFx
I checked your spread indicator. It is compatible with your .arm symbols.

Please close all your charts, restart your platform. Then open a M1 chart, then set and attach your renko script on, then open the offline chart.

Then check in the expert and journal tab if you have error messages.
Attached Image (click to enlarge)
Click to Enlarge Name: untitled.PNG Size: 61 KB
Attached File(s)
File Type: ex4 Renko_Chart.ex4   7 KB | 670 downloads
  • #785
  • Apr 16, 2012 7:03am Apr 16, 2012 7:03am
  •  FerruFx
  • Joined May 2007 | Status: MT4/MT5 EAs/Indicators/Alerts coder | 6,542 Posts | Online Now
Quoting bdunn
FerruFx, I did what you said and things just don't work. I attached two spread indicators and both failed to work. No error msg on journal tab.

I am using the following script to generate renko chart.

Advise?.....


I think that your Renko script isn't compatible with symbols with additional caracters.

Please test the attached indicator instead and let me know.
Attached File(s)
File Type: ex4 RenkoLiveChart_v3.0 (indi)[perso].ex4   12 KB | 925 downloads
MT4/MT5 EAs/Indicators/Alerts coder
  • #786
  • Apr 16, 2012 9:51am Apr 16, 2012 9:51am
Hello !


I found good script -
_fxorg.org/DownloadMtSaveScreenshot.aspx

very good job !

script use some dll, I think on c+ ...

But ... I need support of more
formats types ...

I test standard GIF-8bit 256 colors,

and then export from photoshop(7.0.1) PNG-8bit 256-colors - size in 15-30% smaller !

but if use PNG-8bit 64-colors - my charts(with some indicators) up to 35-45% smaller,
then standard mt4-gif files...
(without loss of quality)


Can you add support for more types of png-format ?

Now as I understand it is 3224bit ...(only)
(but if use 3224 - png have big size like gif ...)

Can You add -

8bit-PNG-256-colors
8bit-PNG-128-colors
8bit-PNG-64-colors
8bit-PNG-32-colors

support ?
(like in export-for-web photoshop window)

Thank you.
Vladimir.


p.s.
PNG library -
http://www.softpedia.com/get/Program...-library.shtml

or-
http://www.libpng.org/pub/png/libpng.html
  • #787
  • Apr 16, 2012 12:11pm Apr 16, 2012 12:11pm
Quoting vladimir.kuc
Hello !


I found good script -
_fxorg.org/DownloadMtSaveScreenshot.aspx

very good job !

script use some dll, I think on c+ ...

But ... I need support of more
formats types ...

I test standard GIF-8bit 256 colors,

and then export from photoshop(7.0.1) PNG-8bit 256-colors - size in 15-30% smaller !

but if use PNG-8bit 64-colors - my charts(with some indicators) up to 35-45% smaller,
then standard mt4-gif files...
(without loss of quality)


Can you add support for more types of png-format...

Vladimir-
As you said it uses a .dll file.
The only person that can add more support formats is the author.

Have you tried contacting him?
  • #788
  • Apr 16, 2012 1:07pm Apr 16, 2012 1:07pm
Quoting Reh
-----------------------------------------------------------------
Hi cyber1 , Thanks a million , the indicator is working great..... It is not necessary but the reason I wanted a little history for the Arrows only was to check out the Percentage of accuracy of how well they predict the actual direction of the forming candle.... with say a history of 30 candles it would also show a confirmation of trend , at least up to the current forming candle...... just a thought. the arrows could be put one more line above or below the differential values....
I have added:
Arrows on history
Asterisks on the equal bars
statistics
Attached Image (click to enlarge)
Click to Enlarge Name: REH4.PNG Size: 44 KB
Attached File(s)
File Type: mq4 FXPT_BarPrices.mq4   5 KB | 716 downloads
  • #789
  • Apr 16, 2012 1:51pm Apr 16, 2012 1:51pm
Quoting Brotyboy
Cyber1, there are a few bugs in this otherwise interesting indi. Could you please have a look at it? It seems to be placing an arrow on the chart when a value is hit, or two values cross, during an open bar. I think confirmation of this is at candle close, at least from what the version with the alert is doing, but when the indi is edited or MT4 is re-started some arrows have disappeared and some appear to have moved from what I'd describe as the signal candle to the entry candle, presumably because there has been a retracement to invalidate...
I appreciate fxtr51 for posting the mq4 file.
As far as Alerts go they seem to be functioning properly. At the close of the Bar. Not sure what you are talking about when you say "alert when the arrow appears".

I have added the ATR input.

The disappearing arrows seem extremely minor. The arrows do move until the Bar closes then stay. w/a few exceptions
It's not something I would be interested in getting into as I may spend 1 hr or 8 and it still not be any better. I would chalk up to being M1 as the culprit being you said much more noticeable on the lower TF's

Anybody else wants to work on it, have at it.
Attached File(s)
File Type: mq4 mindhero_alert_mod.mq4   12 KB | 753 downloads
  • #790
  • Apr 16, 2012 1:52pm Apr 16, 2012 1:52pm
  •  Reh
  • | Joined Mar 2012 | Status: Vanity.... ALL is Vanity !!!! | 55 Posts
Thanks Cyber1
This is coming along Great ! Works great.... I sent you a private message about one more thing that would eliminate the occasional false signal arrows .. if interested let me know. I will send you the conditions.
  • #791
  • Apr 16, 2012 10:39pm Apr 16, 2012 10:39pm
Could someone modify the attached Supertrend indicator to
display as a histogram.

Thanks in advance.

Lufkindog
Attached File(s)
File Type: mq4 SuperTrend nrp mtf_Alert.mq4   8 KB | 859 downloads
  • #792
  • Apr 16, 2012 11:16pm Apr 16, 2012 11:16pm
Quoting lufkindog
Could someone modify the attached Supertrend indicator to
display as a histogram.

Thanks in advance.

Lufkindog
Surprisingly, even i came for the same purpose and found this post.., so pls if someone could make a histogram of it.., would be great
  • #793
  • Apr 17, 2012 2:00am Apr 17, 2012 2:00am
Quoting cyber1
I appreciate fxtr51 for posting the mq4 file.
I have added the ATR input.
It's not something I would be interested in getting into as I may spend 1 hr or 8 and it still not be any better. I would chalk up to being M1 as the culprit being you said much more noticeable on the lower TF's

Anybody else wants to work on it, have at it.
Thanks, Cyber1, for all of this. I understand your position completely and appreciate all your efforts. The problem with not being a coder is that I have no understanding of what any issue entails, nor what the 'river' and 'glava' are all about, so all I know is that the ATR is involved in this indi. If, during your observations, you came to any conclusions about the logic involved in this indi I'd be interested to hear about it.

In the meantime, trade well and have fun.
The dream will never die
  • #794
  • Apr 17, 2012 7:36am Apr 17, 2012 7:36am
Quoting cyber1
I have added:
Arrows on history
Asterisks on the equal bars
statistics
Super.Thanks a lot.
One thing I would really appreciate is to have the possibilitiy to check in MTF .
I think with the MTF-feature its better to analyze an upcoming Trend .
Would be great if you could add this to this intelligent indi.
Greetings Zack
  • #795
  • Apr 17, 2012 11:51am Apr 17, 2012 11:51am
Hi guys, can anybody point me to where I can find help creating a simple indicator?

I am currently trading with Range bars and I need basicly like a simple moving average indicator but that averages the TIME it takes each bar.

Should be fairly simple. Any ideas where/who I can ask for help?

Thanks -C
  • #796
  • Apr 17, 2012 1:24pm Apr 17, 2012 1:24pm
Quoting cyber1
Vladimir-
As you said it uses a .dll file.
The only person that can add more support formats is the author.

Have you tried contacting him?

Yes .. but no answer


but i think that DLL use -
_www.softpedia.com/get/Programming/Components-Libraries/PNG-reference-library.shtml

png-library ..

or here ... -
_www.libpng.org/pub/png/libpng.html

Can someone make analog of him DLL ?
(and script ...)


author of the script not responding !
( [email protected] )
  • #797
  • Apr 17, 2012 3:10pm Apr 17, 2012 3:10pm
Hi Andi

would it be possible for you to code the attached indicator so that when one line crosses the other a single sound/pop up alert is made.

Thank you

Mike
Attached File(s)
File Type: ex4 Instant Trendline Filter.ex4   4 KB | 710 downloads
File Type: mq4 Instant Trendline Filter.mq4   3 KB | 912 downloads
  • #798
  • Apr 17, 2012 6:24pm Apr 17, 2012 6:24pm
Hi all:

The attached indicator fired a sound alert at the closed of the bar when there is a signal. Can someone make some changes on the codes so that sound alert will issue at the current bar instead of waiting till the end of the closed bar?

Many many thanks in advance!

Attached File(s)
File Type: mq4 Signal.mq4   5 KB | 1,013 downloads
  • #799
  • Apr 17, 2012 7:56pm Apr 17, 2012 7:56pm
Hi Bdunn, the signal indicator you posted gives the exact signals as the standard settings of the indicator i attached above. Is there anyway of changing the parameters. For example the indicator above is standard alpha 0.07 which matches your signals however i like to use it with other settings, can the alpha in your signal be manipulated?
  • #800
  • Apr 18, 2012 5:07am Apr 18, 2012 5:07am
Hi all,

Just wanting a point in the right direction on where to find an ea that would place buy/sell orders based on the stairstep indicator arrows. Just wanting to automate my test account to see some results really.

Any ideas peeps?

Cheers!
130 traders viewing now, 2 are registered:
Forz
,
Skyrider60