I will code your EAs and Indicators for no charge

Hi Metatrader.

So far set conditions for trading are met:

Please, I need a code that should allow a given number of trades to occur on the current candlestick regardless of timeframes.

This code should just allow ONLY "n" number of trades to be executed on any particular current candlestick regardless of timeframe.

That should be the only number of trade for that Candlestick. For the next candlestick, the code should again allow only "n" number of trades etc. for other candlesticks where the conditions for trading remained favourable.

Please help me.

With warm regards.

D8D3.

Hi Metatrader,

Please, could you try to provide a code that defines the number of trades allowed within any candlestick of any timeframe. It has to be a number that we can input please.

Regards.

D8d3.

Hi PipStunner,

Please, could you try to provide a code that defines the number of trades allowed within any candlestick of any timeframe. It has to be a number that we can input please.

Regards.

D8d3.

Hello Atomi,

There are so many variables listed that I don't understand and when I try to change the MA in input it all comes right back to ma already there.

Thanks

hi,
i have test this close all ea. at demo account it work very good and close all pos very fast. but when at live , it close all pos very slow. about 10 to 15sec/pos. it look very slow for me and can effect my account. can u or anyone here help me??

below is the ea

Dear friend,
Please code this....
When the price below pivot look for selling trigger . see attachment...
if the price not reach support 1 look for buy trigger....

i hope programmer can finish this ea,
and we can start testing...
Thank you.

I have made my own custom indicators parameters, so I just want a basic EA code that could simply buy and sell if all the trends are positive, can you post something like a blueprint?

hey man!

when you open a window the only thing you want/need to change is MA1 and MA1Mode && MA2 and MA2Mode!

MA1,MA2 = MA size
MA1Mode,MA2Mode = type of MA's

Hi Andi,

I am attempting to modify Ronald Rayguns' "Traffic Lights" EA. As you may or may not know, this EA originally auto entered trades and auto managed TP, SL, move-stop-once and the trail. I would like to enter a trade manually and have the EA auto manage the rest.

I am not a programmer but have learned a lot from Ronald's work. So as you might imagine I am having a few problems, the biggest of which follows:

The modified EA successsfully sets the hard SL and TP on a manually entered trade. However, the stop loss moves forward and backward with each tick. What would cause this?

If you are interested in looking at this, I will post what I have done so far as long as Ronald does not have a problem with it.

Ronald, if this is unacceptable or if you would prefer to look it, please respond.

I would really like some verbal feedback (if at all possible without seeing the code) so that as a learning experience, I can try to solve this myself.

3 parameters-SAR:

Parabolic (PARAB)

J. Welles Wilder's parabolic time/price is a simple study to use. The study continuously computes "top and reverse" price points. Whenever the market penetrates this "stop and reverse" point, you liquidate your current position and take the opposite position. If long, you liquidate the long position and establish a short position. If short, you liquidate the short position and establish a long position. The parabolic time/price study always has you in the market.

While the calculations to derive the "stop and reverse" price are quite tedious, the concept of the study is a model of simplicity. If the trading adage, "The trend is your friend," has merit, this study is the mathematical expression of that adage. Once you initiate a position, the parabolic time/price study gives the market time to move in your favor. If the market does not move in your favor, you need to stop and reverse your position. This study always has a market position.

Wilder defines the "stop and reverse" price as the SAR. The value of the SAR is a function of both time and price. When you enter a position, either long or short, the SAR value moves slowly during the first few trading intervals. This allows the market to work in your favor. But as time progresses, the SAR is either hit, or it follows the market direction in your favor. Remember, the SAR price never reverses. It moves higher or lower with the market and always in the direction of your market position. It is an automatic trailing stop.

When the market trades or touches the SAR value, you stop and reverse your position. This study works best in a trending market. You can imagine the severe whiplash that develops in a choppy, sideways market. In fact, Wilder recommends using this study in conjunction with the Directional Movement Index. The DMI helps you to determine the predominant trend of the market, and it assists you in trading the market from that side only. For a complete discussion, please refer to Wilder's book, New Concepts in Technical Trading Systems.

The parabolic time/price study uses three values in the computations. These values affect the acceleration factor described in the computation section. They are the initial acceleration factor, the addition factor, and the acceleration factor limit. Wilder used the values of .02,.02, and .20, respectively.

You may want to change these factors for different markets. If you do, you specify the new values in thousandths. For example, Wilder's value for the initial acceleration factor is .02 or 20/1000. On your monitor, this value displays as 20. To change it to .03, you type the value 30 which FutureSource translates to 30/1000. You are encouraged to experiment with these values for the same market or for several different markets.

Parameters:
Initial (20) - the initial acceleration factor, in 1/1000.
Addition (20) - the additional acceleration factor, in 1/1000.
Limit (200) - the acceleration factor limit, in 1/1000.
Computation

The computational procedure for the parabolic time/price study is a logic exercise. The actual computations are quite simple. The logic to derive those computations is somewhat more complex.

You must first determine the starting point for the calculations. FutureSource examines the first two trading intervals on the price chart within the active window. If the close for the second trading interval exceeds the close for the first trading interval, assume a long position. Conversely, if the closing price for the second trading interval is less than the close for the first trading interval, assume a short position. This is slightly different from Wilder's discussion, but it is the technique FutureSource uses to compute the study.

Once the market establishes a direction, the initial SAR becomes the extreme price for the two intervals. The extreme price is either the lowest price or highest price for the two trading intervals. The short position uses the high, and the long position uses the low. The universal formula for the SAR is:
SARt = SARt-1 + ( a * ( EPtrade - SARt-1) )
SARt is the stop and reverse price for the current interval.
SARt-1 is the stop and reverse price for the previous interval.
a is the acceleration factor.
EPtrade is the extreme price for the trade.
Before you can understand Wilder's calculations and methodology, some terms need additional explanation. The SAR is always the "stop and reverse" price point. This is the point you liquidate your current position and establish the opposite position.

The acceleration factor, a, is a weighting factor. In Wilder's work, the initial value for the acceleration factor is .02 The acceleration factor increases by a value of .02 each time the extreme price changes for the trade. You do not increment the acceleration factor if the extreme price fails to change. The value for a, acceleration factor, never exceeds .20 in Wilder's methodology.

The extreme price for the trade, EP, is just that. What was the highest or lowest price achieved during this trade? If you have a long position, use new highs as the extreme price. When you have a short position, use the new lows as the extreme price. The extreme price concept allows for normal market corrections without immediately triggering the SAR price, but it keeps the SAR price moving in the direction of the market.

It allows the market to work in your favor for a brief time period, even though the market is correcting and the SAR price continues to converge with the price movement during this correction phase. Thus, the time/price factors are always at work within the parabolic study. Even if prices fail to move in your favor, the time factor continues ratchet the SAR toward current price levels.

Wilder has rules for the parabolic time/price study. They are:
First, a position is entered whenever prices penetrate the SAR. When this occurs, the new SAR becomes the extreme price from the previous trade. After the initial entry point, FutureSource calculates the SAR.
Next, the acceleration factor only increases when a new extreme price is set. When long, you only increment the acceleration factor when the market sets a new high, a new extreme price for the trade. Conversely, you increase the acceleration factor when new lows are made in a short position. If the extreme price does not change, you use the previous acceleration factor in the computations. Do not increase the acceleration factor. According to Wilder's rules and methods, the acceleration factor must not exceed .20 during the life of the trade.
Lastly, the new SAR price must not enter the trading range for the current or previous interval. In a long position, the new SAR must not exceed the low for current trading interval nor may it exceed the low for the previous trading interval. When short, the new SAR never falls below the high of the current or previous trading interval. If this condition occurs, you use either the lowest value of the two lows for a long position or the highest value of the two highs for a short position for the new SAR price.

Hello
I need help please . My broker (go markets) Have just for order execution style switching to 'market' ..And now my EA does not work can you help in making it work again
Thank you

Hi,

Can you please help me combine this 2 indicators into 1.....

Your soonest reply is appreciated.



Regards

Is it possible to make an EA that

SELLS: when four bars in a row have made 4 consecutive lows on the 30 Min time frame.

and

BUYS: when four bars in a row have made 4 consecutive highs on the 30 min time frame.

Take profit would be 15 pips

Stop Loss would be 35 pips or the low or high of the previous bar (or 4th bar)

Thanks

1.An indicator that should draw arrows on charts for awesome oscillator and accelerator oscillator i.e when they change color.
if there can be an alert sound it would be great.
it should show the current trend direction on the top right corner of the chart
if only one oscillator's value is increasing the trend should be shown as weak and if both oscillator's are increasing it should show it as strong.
i hope it will b easy to program.

Also another indicator if you can program it sounds difficult.

2.An indicator that shows the accelerator oscillator's value at the opening of a new candle with a histogram of increase or decrease value (difference)at bar close.

Kindest Regards
Ahsan Ali

Hi i am looking for an indicator that plots particular reversal arrows above closed bars when they meet the requesite criteria.

I have found that when the market has reversed/retraced that these bars can be great for showing reversal from the counter trend back in to teh continuation of the main trend.

I want to start using these bars on more pairs so it would make things alot easier if i could see them as alerts.

I would like an arrow above/below the reversal bar on closure red or green for short/long with a text label refering to what type of bar it is.

The best bars i have found have been

HAMMER , HANGING MAN, DOJI, SHOOTING STAR, INVERTED HAMMER.

i don't require the signal to make reference to any ajoining bars just the single bar this would also help others use the signals in whatever strategy they wish.

I have been on many other sites and searched FF too but i have yet to find an indicator that alerts teh aforementioned bars correctly.

Many thanks if you can help if not no worries

can I ask a very simple question, what is the difference between .mp4 and .ex4 file ?

has anyone ever actually received an EA from all these posts?

Hello friend,
have you made my Ea???
Look you are very busy....

I am interested in creating my own EA. Also do you have ideas for the EA? PM me