I will code your EAs and Indicators for no charge | Page 3748 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #74,941
  • Feb 7, 2025 4:57pm Feb 7, 2025 4:57pm
Quoting mortgagee
hello everyone i need alert (when triangle is created, shown on chart) Bill Williams fractal indicator.
I hope someone will be willing to do it. If someone has that alert already please post it. thank you {image}
try this.. my old version for MT4 = True Fractals Bands BDT AA MTF TT

Quoting Antny
As well like this on the US30 {image} Thank you in advance for your help with this matter
I had sorted it before however my grey matter is ....
if i right understand your screen: try these round levels:
https://www.forexfactory.com/thread/...5#post15034025
https://www.forexfactory.com/thread/...9#post14996439
Attached Image(s) (click to enlarge)
Click to Enlarge Name: True Fractals Bands DT AA MTF TT_2019-04-08.png Size: 41 KB
Click to Enlarge Name: only 2 bars repaints!_17-08-2020_True Fractals Bands BDT.png Size: 55 KB
Click to Enlarge Name: True Fractals Bands BDT AA MTF TT_18-12-2019_BarRight.png Size: 62 KB
Attached File(s)
File Type: mq4 True Fractals Bands BDT AA MTF TT.mq4   27 KB | 443 downloads
study indicator settings and test it well...
  • #74,942
  • Feb 8, 2025 12:44am Feb 8, 2025 12:44am
Hi, would you help me create EA based on this idea



EMA & Parabolic SAR Breakout Strategy for XAUUSD (1-Minute Timeframe)
Indicators Used:

  1. ema 8 (1 m) < ema 21(1m) < ema8(5m) < ema 21(5m) < ema8(H1) < ema21(H1) → Used as the main trend filter.
  2. Parabolic SAR → Used to determine entry points based on price movement.

Sell Entry Rules if Sar(m5) downtrend

  1. Main trend is down
  2. Parabolic SAR confirms a downtrend (SAR dots appear above the price and are getting smaller).
  3. The price retraces temporarily (pullback), and SAR dots start spreading wider.
  4. After the retracement ends, the price resumes the main downtrend, and SAR dots start getting smaller again.
  5. A sell entry is triggered when the first bearish candle closes below the last SAR dot at the retracement point.

    1. Note: If the price only touches the SAR dot but does not close below it, no entry is made.

Buy Entry Rules

 

  1. The opposite of the sell entry rules:

    1. The main trend is up
    2. SAR confirms an uptrend (dots appear below the price and are getting smaller).
    3. The price retraces temporarily, and SAR dots widen.
    4. After the retracement ends, the price resumes the main uptrend, and SAR dots get smaller.
    5. A buy entry is triggered when the first bullish candle closes above the last SAR dot at the retracement point.

Additional Rules to Prevent Overtrading

  1. Only 1 order per SAR signal cycle

    1. During one SAR cycle (from SAR cross-up to SAR cross-down on the price), only one sell or one buy order is allowed.
    2. Even if the previous order is still open, no new entries will be made within the same cycle.

  2. If a new SAR cross occurs, a new trade can be opened.
  3. Entries only occur on the first candle that gives a signal.

    1. If the signal remains on the following candles, no additional orders will be opened.
    2. A new trade is only allowed if a new SAR cross occurs.

  4. SAR comparison with price:

    1. SAR is compared with the high or low of the price, not the close price.


I forgot something important. SL level is Sar [1] (entry candle sar)

Attached Image(s) (click to enlarge)
Click to Enlarge Name: untitled (2).png Size: 49 KB
Click to Enlarge Name: untitled (1).png Size: 28 KB
  • #74,943
  • Feb 8, 2025 1:01am Feb 8, 2025 1:01am
Hi

you can share this indi?

Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 13 KB




Quoting modanetfx
Hello house, please I need a good currency heat map arrows trends indicator that shows when a pair have begin a new trend, if up trend, arrows shows green, if Down trend arrows shows red, if neutral arrows shows other colors. I would very much appreciate if it is multi time frame. Thanks for your anticipated reply please I need a panel or heat map like the arrow indicator in the picture {image}
  • #74,944
  • Feb 8, 2025 1:09am Feb 8, 2025 1:09am
Quoting cja
{quote} It used to work and had an automatic magic value coded into it so multiple timeframes could be loaded on the same chart but it appears with the latest MT4 builds the magic value no longer works. I will have a look next week when the Markets open again.
Master its working it can load multiple times, it only does not refresh at some point user needs to double click or add auto refresh to chart
i am posting for help on pips counting from high low and not from open, if you can add this option to it will help a lot
when counting from open user cant get highlow synchrinize correct
  • #74,945
  • Feb 8, 2025 4:43am Feb 8, 2025 4:43am
Hi master,

Please help me make this indicator work

I tried to insert line 211 to 221 into the original code and the errors poped up

Thanks
Attached Image(s) (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 37 KB
Click to Enlarge Name: screenshot.png Size: 12 KB
Attached File(s)
File Type: mq4 Daily Biased Pivot tempo.mq4   22 KB | 294 downloads
  • #74,946
  • Feb 8, 2025 5:43am Feb 8, 2025 5:43am
Quoting japfx
Hi master, Please help me make this indicator work I tried to insert line 211 to 221 into the original code and the errors poped up Thanks {file} {image} {image}
Can you read the errors?
Do you understnad what the errors say?
Attached Image (click to enlarge)
Click to Enlarge Name: 2025-02-08_124209.jpg Size: 29 KB

A long time ago, around the year 2000, it took me 4 days to figure out which paretheses was wrong in my PHP code.
Not to mention that I uploaded that code to my host and my whole page disappeared. Luckily they had a quite recent backup, so not much was lost.
Plus, I was coding in the simple Word Notes, I didn't have any specific Editor.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #74,947
  • Feb 8, 2025 6:07am Feb 8, 2025 6:07am
Quoting BestTraderEv
{quote} Can you read the errors? Do you understnad what the errors say? {image} A long time ago, around the year 2000, it took me 4 days to figure out which paretheses was wrong in my PHP code. Not to mention that I uploaded that code to my host and my whole page disappeared. Luckily they had a quite recent backup, so not much was lost. Plus, I was coding in the simple Word Notes, I didn't have any specific Editor.
I really don't know much about coding , while I pated the line from another program , I got that error , as I tried to remove the parentice , I got another , hence the reason I need master to intervene for me before I got notty in the skull... Please save a soul....
  • #74,948
  • Feb 8, 2025 7:27am Feb 8, 2025 7:27am
Hello friends. I wonder if there is a method that I can see graphs at different time intervals other than predefined time intervals that I can reach directly from my screen? For example, I will be able to switch quickly by touching the values on the screen using 10 minutes and multiples of 10 minutes.
  • #74,949
  • Feb 8, 2025 8:22am Feb 8, 2025 8:22am
Quoting jeanlouie
{quote} I dont think the issue is with this indicator, I can load it and change the chart symbol or chart charts with no issue, the indicator doesn't make many objects or have significant calcs. I suspect there is another indicator being used that is causing issues. edit -

I noticed a while loop with no limit, so if it hasn't found something it's looking for then it will attempt to continue until it crashes, this possibly could be the issue you've encountered, that coincidentally didn't occur with my symbol tfs. {file}
Dear Honourable & Respectable Mr @Jeanlouie in the past you had helped me by repairing the above indicator i have attached same indicator with the same logic but they have added few more time frame to it but again it has the same issue whenever i add it to my chart the chart freezes can you please check and do the needful and modify it where the indicator works smoothly please
Attached File(s)
File Type: mq4 ! Givonly_SnR_SnD_r2.01.mq4   13 KB | 355 downloads
  • #74,950
  • Edited 12:51pm Feb 8, 2025 12:36pm | Edited 12:51pm
Quoting japfx
{quote} I really don't know much about coding , while I pated the line from another program , I got that error , as I tried to remove the parentice , I got another , hence the reason I need master to intervene for me before I got notty in the skull... Please save a soul....
I think I know what you're trying to do in this code.
However, this way you end up with a lot of redundant code which only makes it worse.
Plus, deleting the objects and recreating them on every tick is also a vewry bad idea.
So, in general, the idea is good, but the coding is really bad.
IOW, you are trying to use existing code to create your own indicator, but because you don't know shit what you're doing, the result can't be anything good.
So, all you actually need is the Daily Pivots - you don't need the Weekly and Monthly Pivots.
You only need one Pivot Entry Zone, and you don't need to plot anything else.
You only need one Pivot Level for SL.
You only need one Pivot Level for Conservative Take Profit.
You only need one Pivot Level for Aggressive Take Profit.
So, you don't need to calculate all the Pivot Points and Mid Points!!!
So, you don't need 13 buffers!!!
If you need buffers at all, you only need them for the Levels which you are using.
So, there is so much to "fix" in your code that it would be better to start from scratch and create a totally new indicator.
And also, why would you need all the historical Levels, if you all you need is the current and the future, so only 2 plots?
You want something like this?
Attached Image (click to enlarge)
Click to Enlarge Name: 2025-02-08_194605.jpg Size: 197 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #74,951
  • Feb 8, 2025 1:45pm Feb 8, 2025 1:45pm
Quoting BestTraderEv
{quote} I think I know what you're trying to do in this code. However, this way you end up with a lot of redundant code which only makes it worse. Plus, deleting the objects and recreating them on every tick is also a vewry bad idea. So, in general, the idea is good, but the coding is really bad. IOW, you are trying to use existing code to create your own indicator, but because you don't know shit what you're doing, the result can't be anything good. So, all you actually need is the Daily Pivots - you don't need the Weekly and Monthly Pivots. You...
all I want to do is skip Sunday data. The only lever I want is the central pivot zone.
  • #74,952
  • Feb 8, 2025 2:31pm Feb 8, 2025 2:31pm
Quoting japfx
{quote} all I want to do is skip Sunday data. The only lever I want is the central pivot zone.
Wouldn't it be easier to find a broker with the 5 days per week option?

Even if you used a demo for analysis, that makes it easier for all around.

That is pretty much the industry standard for more years than I can remember now.

What is the name of this broker stuck in last century? Just curious?
It takes a lot for me to IGNORE you, but you can try.
  • #74,953
  • Feb 8, 2025 3:23pm Feb 8, 2025 3:23pm
Quoting japfx
{quote} I really don't know much about coding , while I pated the line from another program , I got that error , as I tried to remove the parentice , I got another , hence the reason I need master to intervene for me before I got notty in the skull... Please save a soul....
This is what I created:
Attached Image (click to enlarge)
Click to Enlarge Name: 2025-02-08_222150.jpg Size: 278 KB

Attached File(s)
File Type: ex4 TrendBiasedPivotTargets_BTEv.ex4   49 KB | 308 downloads

Do not change the file name!!!

Default settings work best for H4.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #74,954
  • Feb 8, 2025 3:25pm Feb 8, 2025 3:25pm
Quoting japfx
{quote} all I want to do is skip Sunday data. The only lever I want is the central pivot zone.
You don't need this indicator for that.
You can easily find a Pivot Points indicator which does what you want.
Just Google and you will find.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #74,955
  • Edited Feb 9, 2025 3:27am Feb 8, 2025 9:21pm | Edited Feb 9, 2025 3:27am
Quoting HumbleLearne
{quote}... attached same indicator with the same logic but they have added few more time frame to it but again it has the same issue...chart freezes...
Along the way someone removed the exit condition in the while loop, it's the exact same issue as before. Seems fine now.
Attached File(s)
File Type: mq4 ! Givonly_SnR_SnD_r2.01_mod.mq4   13 KB | 395 downloads
  • #74,956
  • Feb 8, 2025 11:52pm Feb 8, 2025 11:52pm
Quoting jeanlouie
{quote} Along the way someone removed the an exit condition in the while loop, it's the exact same issue as before. Seems fine now. {file}
Thank You very much for your Help & Support your Help Cooperation & Coordination is very Highly Appreciated. May you and your Family Always be happy and You Grow by Leaps and Bounds in every Venture you undertake. Have Blessed Positive & Profitable Time ahead.TC
  • #74,957
  • Feb 9, 2025 1:25am Feb 9, 2025 1:25am
Quoting jeanlouie
{quote} along the way someone removed the an exit condition in the while loop, it's the exact same issue as before. Seems fine now. {file}
thanks for bringing good indicator,can this have on off button plz,so chart looks clean.
  • #74,958
  • Edited 1:07pm Feb 9, 2025 12:29pm | Edited 1:07pm
Attached Image (click to enlarge)
Click to Enlarge Name: EURUSD_2025-02-09_17-47-23.png Size: 13 KB


Hello coders

The above is an indicator by treypeng on trading view, (ADR.v2 - Average Daily Range [@treypeng]), slightly modified with solid adr lines and lines colour change.

As the name suggests, its based on ADR price action, with visible plotlines.

Can a similar indicator be created for MT and an ea be created by placing buys and sells when the ADR line is touched. A buy when price touches lower adr line and sell when price touches upper adr line ( ie reversal trading ) or even an option to reverse and place long/short when the lines are touched (continuation trading)

stop loss and take profit will be the ADR for that day.

option to change adr plotlines to 150% 200% etc ( variable option )

EA should have martingale order option sequences.
  • #74,959
  • Edited 2:06pm Feb 9, 2025 1:10pm | Edited 2:06pm
Quoting Samalin
{quote} Master its working it can load multiple times, it only does not refresh at some point user needs to double click or add auto refresh to chart i am posting for help on pips counting from high low and not from open, if you can add this option to it will help a lot when counting from open user cant get highlow synchrinize correct
pips counting from high low and not from open
So how would that work? On the current day the pips from high / low would never come into play as the high / low would keep expanding throughout the day.
I can guess how it might work but as it is your idea you explain in detail how you think it should work.
Trade what you see not what you hope
  • #74,960
  • Edited 2:58pm Feb 9, 2025 2:42pm | Edited 2:58pm
113 traders viewing now