I will code your EAs and Indicators for no charge

Quoting MwlRCT

Disliked

{quote} Your EA is ready and tested. {image} Download: {file} {file} Folders: MQL4/Indicators: Place the Smoothed LWMA (mtf+alerts+arrows).ex4 file here. MQL4/Experts: Place the EA file here.

Ignored

Quoting BestTraderEv

Disliked

{quote} This is some modified Half-Trend indicator. It uses some strange arbitrary points as deviation from price: {image} {image} And also, it contains some kind of strategy added to the code. And, it looks like at some moment it was meant to be be used only on M1 or M5, not higher, but someone modified that, too. Also, in real time we can never enter where you see the arrows on historical chart. Those arrows are plotted after the Half-Trend MA is established, so about 2 bars later, if not rejected. So, you want to add another MA to this? I don't...

Ignored

Quoting BeingSImple

Disliked

Please clarify following : 1. Should we apply the indicator given with the EA, to keep the EA running successfully ? 2. Is it any mistake to apply another indicator with the EA ? 3. (Might sound silly, But Sorry) Can you kindly check, Does Changing parameters of the EA affect its functioning ? Thank you brother.

Ignored

Quoting MwlRCT

Disliked

{quote} - Activities from #1 to #3 do not affect the working of EA. - The only thing that affect EA is "Auto-trading" must be active, Double check it. {image}

Ignored

Quoting Watercooler

Disliked

Hi Coders, i need your help to create 1. bullish breaker block and 2. bearish breaker block pls refer below picture thank you in advance {image}

Ignored

Quoting koredee

Disliked

{quote} Hi BestTraderEv Pls do help. I have seen that the present arrow paints 2 bars after and I am looking at having that corrected if possible so it paints at the exact time. Also I have tested with MA 4/5 and it looks good if the arrow paints at the instance of the cross. Pls do help. Thanking you Sir.

Ignored

Quoting MwlRCT

Disliked

{quote} - Activities from #1 to #3 do not affect the working of EA. - The only thing that affect EA is "Auto-trading" must be active, Double check it. {image}

Ignored

Quoting BeingSImple

Disliked

{quote} @MwIRCT Bro.. Thank you for the confirmation on its functioning. Honestly, i did check everything before knocking your doors here on it. Anyway, i will go through & get it affirmed again. Thank you

Ignored

Quoting BestTraderEv

Disliked

I have noticed that this EA uses pips, not points.
This could be one reason, because pips aren't consistent across all instruments, and for sure, the code can't calculate the pips to points consistently for every instrument. So, there could be the error that SL/TP are too close to the price (STOPLEVELS).
Also, I don't understand why anybody would decide to use TimeGMT()???
After all, we are always trading the broker's server...

Ignored

//
/*--------------------------------------------------------------------
Change-log: Smoothed LWMA (mtf+alerts+arrows)_EA_v1.1
Date: 2025-01-01
By: MwlRCT
--------------------------------------------------------------------
- Enhanced EA with Additional Input Options (v1.1):
    - Implemented `CloseOnOppositeSignal`: Enables/disables closing trades on opposite signals.
    - Implemented `UseDynamicStopLoss`: Enables/disables dynamic stop loss calculation.
    - Implemented `StopLossPips`: Sets additional pips for dynamic stop loss.
    - Implemented `EnableTrailingStop`: Enables/disables trailing stop functionality.
    - Implemented `TrailingStart`: Sets pips from entry to start trailing.
    - Implemented `TrailingDistance`: Sets minimum distance for trailing stop.
    - Implemented `TrailingStep`: Sets step size for trailing stop adjustment.
    - Implemented `InstantTradeOnChartDrop`: Enables/disables instant trade execution on chart drop.
    - Implemented `MaxBarsFromSignal`: Sets the maximum bars back to find a signal for instant trade.
    - Implemented Dynamic Stop Loss Calculation:
    - Added `CalculateDynamicStopLoss()` function to calculate stop loss based on highest/lowest price within a given range.
    - Implemented Trailing Stop Logic:
    - Added `HandleTrailingStop()` function to manage trailing stop adjustments based on the specified settings.
    - Implemented Instant Trade Execution on Chart Drop:
    - Added `ExecuteInstantTrade()` function to execute instant trades based on the last active signal.
    - Implemented Signal Detection Logic:
    - Added `CheckLongSignal()` and `CheckShortSignal()` functions based on a moving average crossover (example logic).
    - Implemented Opposite Signal Detection:
    - Added `OppositeSignalDetected()` function to detect if there is an opposite signal to the current open trade.
    - Implemented Input Validation:
    - Added input validation for `StopLossPips`, `userTPPips`, and `userSLPips` to ensure they are non-negative.
    - Returns `INIT_PARAMETERS_INCORRECT` if negative values are used.
    - Improved Logging:
    - Added logging for trade closures, stop loss updates, and instant trades for better monitoring and debugging.
    - Corrected Order Modifications:
    - Enhanced `ModifyOrder` to print whether trade modification was successful or failed.
    - Streamlined Code:
    - Cleaned up code and improved clarity by adding comments and using helper functions.
- Added Pips to Points Conversion (v1.1):
    - Introduced `PipsToPoints()` function to convert pip values to points for accurate calculations using `SymbolInfoDouble(Symbol(), SYMBOL_POINT) * 10`.
    - Updated `CalculateDynamicStopLoss`, `HandleTrailingStop`, `SL`, and `TP` functions to use `PipsToPoints` for consistent calculations.
- Implemented Stop Level Validation (v1.1):
    - Enhanced the `OpenTrade()` function to check the minimum `STOPLEVEL` using `SymbolInfoInteger(Symbol(), SYMBOL_TRADE_STOPS_LEVEL)`.
    - Modified `OpenTrade()` to dynamically adjust StopLoss (sl) and TakeProfit (tp) values if they fall within `STOPLEVEL` limits, providing order execution and handling trade opening errors.
--------------------------------------------------------------------*/
//

Quoting BeingSImple

Disliked

{quote} @MwIRCT Bro.. Thank you for the confirmation on its functioning. Honestly, i did check everything before knocking your doors here on it. Anyway, i will go through & get it affirmed again. Thank you

Ignored

Quoting MwlRCT

Disliked

{quote} - Thank you for this input. // /*-------------------------------------------------------------------- Change-log: Smoothed LWMA (mtf+alerts+arrows)_EA_v1.1 Date: 2025-01-01 By: MwlRCT -------------------------------------------------------------------- - Enhanced EA with Additional Input Options (v1.1): - Implemented `CloseOnOppositeSignal`: Enables/disables closing trades on opposite signals. - Implemented `UseDynamicStopLoss`: minimum `STOPLEVEL` using `SymbolInfoInteger(Symbol(), SYMBOL_TRADE_STOPS_LEVEL)`. - Modified `OpenTrade()` to...

Ignored

Quoting BeingSImple

Disliked

Thank you Once again for the Efforts you have invested in getting this EA to perfection.

Ignored

Quoting MwlRCT

Disliked

{quote} - Consider adding Higher Time frame Filter or - Consider adding one extra indicator as filter. Benefit: - additions can increase the EA's win rate, reduce losses.

Ignored

Quoting forevertrade

Disliked

Hello to comunity,i want to ask if posible,remove alerts from this indicator on level 1 and level 2,leaving only level 3 working. Thanks,best regards. {file}

Ignored

Before:
extern double Period1         = 5.0; 
extern double Period2         = 13.0; 
 
To Disable level 1 and 2 (AFTER)
extern double Period1         = 0.0; 
extern double Period2         = 0.0;

Quoting BestTraderEv

Disliked

{quote} There may be other reasons why EA isn't opening trades. I have noticed that this EA uses pips, not points. This could be one reason, because pips aren't consistent across all instruments, and for sure, the code can't calculate the pips to points consistently for every instrument. So, there could be the error that SL/TP are too close to the price (STOPLEVELS). Also, I don't understand why anybody would decide to use TimeGMT()??? After all, we are always trading the broker's server time (TimeCurrent()), so there is no reason why we should...

Ignored

Quoting ykpuffy07

Disliked

{quote} Happy New Year To you Boss!!! I trust you and the family are doing okay. Please, I have been searching for a working version of this indicator attached but I haven't been successful in my search and it saddens my heart. My apologies upfront, is there any way you can help in making it work again ??? I know it is not the mql4 version and trust me I've searched heaven and earth for it but I couldn't get it {image} {file}

Ignored

Quoting MwlRCT

Disliked

{quote} Just do this replace 5 and 13 with 0.0 Before: extern double Period1 = 5.0; extern double Period2 = 13.0; To Disable level 1 and 2 (AFTER) extern double Period1 = 0.0; extern double Period2 = 0.0;

Ignored