{quote} Dude, are you stupid, or something? Can't you see I'm busy?? How are you privelaged to be so intrusive, pushy, obtrusive???
please even possible and fell free help me 
I will code your EAs and Indicators for no charge
please even possible and fell free help me - #73,562
- Dec 3, 2024 2:43pm Dec 3, 2024 2:43pm
{quote} I’m sorry bro, My English is poor and I didn't realize you were busy. I didn't mean to be disrespectful and I didn't realize it
Also added an option to turn them on/off (alertsPush)
Hello Friends,
Could someone assist me in creating an Expert Advisor (EA) for MT5 based on the "Target Bands" indicator? The EA should open a buy trade at the open of the candle appearing after the signal is triggered on the previous candle. First candle = signal. Next candle = Buy/Sell.
That's all.
Thanks in advance
Could someone assist me in creating an Expert Advisor (EA) for MT5 based on the "Target Bands" indicator? The EA should open a buy trade at the open of the candle appearing after the signal is triggered on the previous candle. First candle = signal. Next candle = Buy/Sell.
That's all.
Thanks in advance
--- only constant in this world is change ---
- #73,567
- Dec 4, 2024 8:44am Dec 4, 2024 8:44am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
Hello Friends, Could someone assist me in creating an Expert Advisor (EA) for MT5 based on the "Target Bands" indicator? The EA should open a buy trade at the open of the candle appearing after the signal is triggered on the previous candle. First candle = signal. Next candle = Buy/Sell. That's all. Thanks in advance
What you see is history.
In reality there were signals earlier, but then the indicator repainted.
So, the EA will be losing money...
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,569
- Edited 5:43pm Dec 4, 2024 4:52pm | Edited 5:43pm
- Joined Mar 2022 | Status: Trader | 6,558 Posts
BestTraderEv uratuj mnie proszę ostatni raz, oczywiście jak znajdziesz czas, brakuje mi ostatniego wskaźnika, za dużo okazji tracę nocami. Potrzebuję wskaźnika pod układ z 3 świec, raczej dla Ciebie prosty do zakodowania. Warunki: Pierwsza świeca spadkowa druga wzrostowa, trzecia spadkowa, z tym, że ciało świecy wzrostowej musi być mniejsze od ciała pierwszej i trzeciej świecy spadkowej, nie wlicząjąc ich cieni. W drugą stronę przy wzroście to...
I zakres dat na wykresie.
A zresztą, co tam:
Nie zmieniać nazwy pliku!!!
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,572
- Dec 4, 2024 5:45pm Dec 4, 2024 5:45pm
- Joined Mar 2022 | Status: Trader | 6,558 Posts
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
Dear All, this indicator gives the following push notification,i want to add account number in it,im not intersted in trade number and price label,but account number is important because i have several account and i dont know which account this trade is opened,thanking you {file} {file} {image}
i did not test it, try it and let me know
indicator's features:
- Order Notifications: Option to receive notifications for new and closed orders.
- Customizable Display: Choose which details to show, such as account number, ticket number, symbol, open price, and order type.
- Notifications & Logging: Send notifications to email, mobile, or PC and log messages to the terminal.
- Close Reason Detection: Identify whether an order was closed by Stop Loss or Take Profit.
- Custom Title: Add a custom account title to be included in the messages.
Theory of Everything is Liquidity...https://www.youtube.com/@FxArt.Trader
- #73,577
- Dec 5, 2024 5:09am Dec 5, 2024 5:09am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
{quote} Działa idealnie, a zmieniłbyś zakres historii załóżmy max do 100 świec albo z wyborem zakresu ile ma świec z historii pokazywać? nie wiem czemu ale pusty wykres z tym wskaźnikiem tak obiąża platformę, że przy zmianie tf zawiesza mi na jakieś 5 sekund, a nie mam najgorszego kompa. Dziękuję bardzo za wskaźnik, tu akurat był tf 5m, złoto.
Ogranicz liczbę świec na wykresie:
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,578
- Edited 5:37am Dec 5, 2024 5:19am | Edited 5:37am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
Hello again, BTEv. I am still trying to get the EA to work as I have selected it to trade LONGS only this morning on BTC which has smashed all barriers on its way up. Unfortunately still does not take any trades. I went through the logfiles and deleted all the synchronising data as well, but I have now asked MQL5 for help as the synchronising did not stop. Is there perhaps anything you can recommend to get it to work? Hercs. {image}
You said that you have 5000 point Renko Bricks on BTCUSD.
Please look at the timestamps of the signal candle and the next candle after that - they are exactly the same.
After that you have 4 consecutive bars with the exact same timestamp.
So, the bar with the signal is actually not on the last closed bar, even though it looks like that on the Renko chart.
No EA can do this.
If this can be done at all, it must be done in a different way, I imagine in general, that it would have to be based on price change, not on the signal bar.
Also, you are always looking at the chart after the fact and you are experincing the "lost opportunity" syndrome.
Lost opportunity about which you could not have known before it happened.
And the smallest time interval on MT4 is 1 minute.
There is no way to avoid this.
I guess, that if you want to do this, you need some other trading platform which can do this.
MT4 and 5 are not suitable for this.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,580
- Edited 1:16pm Dec 5, 2024 9:10am | Edited 1:16pm
- Joined Mar 2022 | Status: Trader | 6,558 Posts
{quote} ====== BTEv, I am NOT resistant at all, see my M1-chart screenshot here for your perusal and comment. I am quite happy to drop Renko charts alltogether if M1 would work and I don't see anything adverse in the logfiles either. The fact that the PA is fast, could possibly produce say 10 bricks before such a trigger would kick-in. (That took me a while to understand and I APOLOGISE FOR THAT) Would it be possible to add the brick-size + spread and code the EA to take the trade based on brick size? I would imagine that the EA should be coded...
I was outside in fresh cold air, and I figured out how to better explain this:
So, we have 5000 pts Renko Bricks, and there is no signal, and 5000 pts for BTCUSD is a very small price change.
Now comes a tick with a price change of 15 000 pts (3 Bricks).
These 3 Bricks will be plotted all at once, in one tick, also calculated in that tick.
Those Bricks will be without any wicks, for sure.
So, the signal arrow will be on Brick[2] or even Brick[3], so the EA didn't and couldn't get the signal on Brick[1].
And also, in order to be able to take such a move, we need to be in position already before the move happens, so any signal indicator is useless.
Second:
I ran the EA, went out, came back, and it's working.
Third:
The EA already has "Maximum Spread Points Allowed".
Did you miss that input parameter?
Maybe that's why the EA isn't trading for you?
Fourth:
I don't understand what you mean by: " Would it be possible to add the brick-size + spread and code the EA to take the trade based on brick size?"???
We can create an EA to trade any Renko Chart or standard chart based on some other entry and exit conditions, yes.
Do you have any specific algorithm in mind that no-one had ever thought of, before?
Also, yes, it's not a problem to code the EA to take one position untill it's closed, for example.
There is no problem to trigger the EA OrderSend() when the price moves by the brick range, but on what preliminary conditions when we can't use any indicator signals?
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!