""TP is whatever you can get before it goes against you.""
I will code your EAs and Indicators for no charge
- #73,102
- Nov 15, 2024 12:51am Nov 15, 2024 12:51am
- | Commercial User | Joined Aug 2019 | 2,245 Posts | Online Now
{quote} These are not good arrow markers. Try this! This is very good stuff. It indicates more accurately and faster. download: Download the 'US30 Revolt' Technical Indicator for MetaTrader 4 in MetaTrader Market check it out with this setting! set it in the smothing option if you want slower, fewer arrows! {image} {file}
{quote}Lo hice. Pero un indicador de cada dos estaría bien. Como en la imagen, ampliada. ¡Pruébelo!
I couldn't see, oh I didn't understand your explanations, this is what I got, I would have to keep looking for the most suitable configuration! With the money test, I made a profit, when it goes into the lateral zone is when a fault is noticed, nothing that can't be remedied!!
- #73,104
- Nov 15, 2024 3:25am Nov 15, 2024 3:25am
{quote} And what method would you want by which to tell the indicator where to start plotting the line? IOW, by which method should it get the price?
I did not mention but it were in my mind I should have specified sorry for the trouble. I like the tool you created for the (member acetrader, acetrader_compare_two_candles_indicator.ex4).I want a bit different when I click on the High of any candle it draw horizontal line from high of that candle point up to current candle and having an option to ray offset to right of the current + x number of candles (if x is 0 then up to current candle). In case if I click on the low candle same as high method.
-I can plot minimum 7 numbers of horizontal lines without removing previous.
-if possible having On/Off button to remove lines without removing the indicator and replotting again on different points.
Hope this helps.
Regards,
Moti
- #73,106
- Edited 4:02am Nov 15, 2024 3:50am | Edited 4:02am
{quote} Found Step = 0.5 works best for XAUUSD |TimeFrame m5. {image}
jpy M5
8x indicator
8 settings
Co arrow indicator
tpl (settings)
- #73,109
- Nov 15, 2024 5:40am Nov 15, 2024 5:40am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
{quote} yeh, but we also can use EMA Formula but Time[], High[], Low[], Open[], Close[]..... are not working we must set them and copy them like lol datetime Time[]; double Low[]; double High[]; int OnCalculate(const int rates_total, const int prev_calculated, const datetime& time[], const double& open[], const double& high[], const double& low[], const double& close[], const long& tick_volume[], const long& volume[], const int& spread[]) { int limit = rates_total - prev_calculated; if(CopyLow(Symbol(), PERIOD_CURRENT, 0, rates_total, Low) <= 0)...
Use them!
Instead of Close[] use close[].
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,110
- Nov 15, 2024 5:44am Nov 15, 2024 5:44am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,111
- Nov 15, 2024 5:56am Nov 15, 2024 5:56am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
hello coders,i like arrow size 10, can you please add and arrow size option to the Stochastic indi below when out of the overbought/sold zone and if posible take off the label? thanks {file} {image}
BTW, there are no labels in this indicator.
There is a comment, and I took that out.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,112
- Edited 10:22am Nov 15, 2024 6:54am | Edited 10:22am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
{quote} Hello BestTraderEv, thank you for asking a logic question
Do not change the file name!!!
Note:
For High Line, click on candle between mid-price and high-price.
For Low Line, click on candle between mid-price and low-price.
In order to delete the objects, you do it manually.
You can click as many candles as you like.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,114
- Edited 9:07am Nov 15, 2024 8:01am | Edited 9:07am
{quote} {file} {file} Do not change the file name!!! Note: For High Line, click on candle between mid-price and high-price. For Low Line, click on candle between mid-price and low-price. In order to delete the objects, you do it manually. You can click as many candles as you like.
-I like you extend my request indicator have no limit it is plotting as much as lines I need.
-Regarding deleting the objects manually it is best option instead having button this way one can delete unwanted line.
-But can you check price label is not deleted.
-Also I like clicking method to draw the line…on candle between mid-price and low-price or high-price.
-Extending right offset in bars from index 0 to x candles is a great option.
-But line does not update when new candle appear.
Kind regards,
Moti
- #73,115
- Nov 15, 2024 9:48am Nov 15, 2024 9:48am
- Joined Jun 2013 | Status: enjoying life | 23,842 Posts
- #73,116
- Edited 10:25am Nov 15, 2024 9:54am | Edited 10:25am
- Joined Mar 2022 | Status: Trader | 6,558 Posts
{quote} Hello BestTraderEv, I appreciate your kind help for making this fine tool.
The price label is a different object and is not part of the line.
You delete the label just like any other object.
This price label has only one anchor point - at the tip of the dash.
Well, in MT5 it's on the left end of the dash, in MT4 it's on the right end.
Now updates:
Do not change the file name!!!
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
- #73,117
- Nov 15, 2024 11:11am Nov 15, 2024 11:11am
{quote} You need to delete the price label manually, too. The price label is a different object and is not part of the line. You delete the label just like any other object. This price label has only one anchor point - at the tip of the dash. Well, in MT5 it's on the left end of the dash, in MT4 it's on the right end. Now updates: {file} {file} Do not change the file name!!!
I appreciate you made my weekend happy wish for you the same.
Kind regards,
Moti
- #73,118
- Edited 12:19pm Nov 15, 2024 12:04pm | Edited 12:19pm
Can someone here create a indicator or expert (MT4) for me that will measure strength of MA/EMAs? Idea is to have it measure the angle of one average and the width of two averages to gain an idea of market strength and momentum. Maybe give it a composite strength rating on a time frame table like the ADX table on chart. If anyone is skilled enough Id appreciate it.
