I will code your EAs and Indicators for no charge

Quoting DON-K

Disliked

{quote} Hi Mntiwana this is the SMI that is default in the SMTMMS oscillator indicator i posted {image} {file} but i want it to have the same setting with this Blau SMI a different indicator i attached to the SMTMMS OSCILLATOR{image} I have tried playing with the settings but its not working {file}

Ignored

Quoting ozkanim

Disliked

{quote} After the jam, the strong movement starts. But I don't know the input settings. https://forex-station.com/adx-dmi-in...ml#p1295350800 {image}

Ignored

Quoting DON-K

Disliked

{quote} Hi Mntiwana this is the SMI that is default in the SMTMMS oscillator indicator i posted {image} {file} but i want it to have the same setting with this Blau SMI a different indicator i attached to the SMTMMS OSCILLATOR{image} I have tried playing with the settings but its not working {file}

Ignored

Quoting kvak

Disliked

{quote} Also, there is different code as you see from picture. And if you changed it to original is same like smi averages.... {image} {image}

Ignored

Quoting BestTraderEv

Disliked

{quote} But then it runs out of the range of the indicator maximum and minimum.

Ignored

Quoting jeanlouie

Disliked

{quote} Seconds wasn't mentioned in the first post and the pic used was above 1min tf, I didn't get the need of seconds. Tick_HL_timeseconds - prints the seconds of the tick when highest and lowest price occurred - running live only - option to show the minute, only if tf is above 1min - styling, rotation pics are from the tester, though btcusd is live to run on {file} {image}

Ignored

Quoting naick

Disliked

{quote} {image}You run the indicator on EURUSD 15min Candle time frame. my doubt from the above figure is except circled bars for tf>1min ft. why you have got time.seconds greater than 15min. example first bar time @ highest tick: 33.45, time @ lowest tick:40.0, this means time taken for highest tick is 33min, 45 seconds where as our candle max duration is 15min only. same for time taken for lowest tick recorded is 40min , 0 seconds where as our max duration is 15min only. please clarify. our time at highest/lowest tick must not exceed max 15min...

Ignored

Quoting BestTraderEv

Disliked

{quote} The highest drawdown of a floating order isn't registered anywhere, so it's not possible to access such data, because it isn't available. All we can do is read the highets losing deal which was closed, but still this woin't tell us what the highest DD was in the past. DD is the maximum floating net loss, and that isn't available.

Ignored

int Order(int ordertype, string comment)//ok
  {
   int             ticket;
   double          lot         = SetupLot(ordertype),price, sl = 0, tp = 0;
   price = 0;
   if(ordertype == OP_BUY)
     {
      price = AskPrice();
      if(StopLoss > 0)
         sl = NormalizeDouble(price-(StopLoss*POINT),DIGIT);
      if(TakeProfit > 0)
         tp = NormalizeDouble(price+(TakeProfit*POINT),DIGIT);
     }
   if(ordertype == OP_SELL)
     {
      price = BidPrice();
      if(StopLoss > 0)
         sl = NormalizeDouble(price+(StopLoss*POINT),DIGIT);
      if(TakeProfit > 0)
         tp = NormalizeDouble(price-(TakeProfit*POINT),DIGIT);
     }

   ticket = OrderSend(Symbol(),ordertype,lot,price,SlipPage,sl,tp,comment,MagicNumber,0);
   if(ticket == -1)
      ShowError("Order " + OrderCmd(ordertype));
   return(ticket);
  }

Quoting gallardo

Disliked

{quote} Greetings and thanks for your attention Let me explain completely I need to manage the actual drawdown of my account In this way, I need to know how much my account experienced the maximum loss of open trade or closed trade. For example, we open a deal The loss floats to -$1000 and is closed with, for example, +$100 profit In this case, I need the indicator to record and display the maximum loss seen in the account(-1000$$time and date) And the thing that can be added is that it can extract and display all the real Drawdown seen from the...

Ignored

Quoting kurama87

Disliked

hi want to ask, how to make this code using spread to calculate minus plus ?? because using real account broker, the spread eat my take profit and end up with negative profit.. int Order(int ordertype, string comment)//ok { int ticket; double lot = SetupLot(ordertype),price, sl = 0, tp = 0; price = 0; if(ordertype == OP_BUY) { price = AskPrice(); if(StopLoss > 0) sl = NormalizeDouble(price-(StopLoss*POINT),DIGIT); if(TakeProfit > 0) tp = NormalizeDouble(price+(TakeProfit*POINT),DIGIT); } if(ordertype == OP_SELL) { price = BidPrice(); if(StopLoss...

Ignored

int Order(int ordertype, string comment)//ok {
int ticket;
double lot = SetupLot(ordertype), sl = 0, tp = 0; price = 0, priceSL = 0;
 
if(ordertype == OP_BUY) {
price = AskPrice();
priceSL = BidPrice();
if(StopLoss > 0) sl = NormalizeDouble(priceSL-(StopLoss*POINT),DIGIT);
if(TakeProfit > 0) tp = NormalizeDouble(price+(TakeProfit*POINT),DIGIT);
}
 
if(ordertype == OP_SELL) {
price = BidPrice();
priceSL = AskPrice();
if(StopLoss > 0) sl = NormalizeDouble(priceSL +(StopLoss*POINT),DIGIT);
if(TakeProfit > 0) tp = NormalizeDouble(price-(TakeProfit*POINT),DIGIT);
}
 
ticket = OrderSend(Symbol(),ordertype,lot,price,SlipPage,sl,tp,comment,MagicNumber,0);
if(ticket == -1) ShowError("Order " + OrderCmd(ordertype)); return(ticket); }

Quoting BestTraderEv

Disliked

{quote} The first candle showing the time from the left on M15, showing minutes and seconds: It's the M15 candle which starts at 10:30 and ends at 10:45. So, the High was at 10:33:45 and the Low was at 10:40:00.

Ignored

Quoting BestTraderEv

Disliked

{quote} The code you posted only sends an order request (OrderSend()) to the broker's server with TP and SL calculated based on variables StopLoss and TakeProfit. It deos not close any orders, so what exactly do you expect? It's up to you to establish the StopLoss and TakeProfit distance taking into account Spread and/or Commissions.

Ignored

int Order(int ordertype, string comment)
  {
   int             ticket;
   double          lot = SetupLot(ordertype), price, sl = 0, tp = 0;
   double          spread = MarketInfo(Symbol(), MODE_SPREAD) * POINT; // Calculate the spread in points
   price = 0;
   if(ordertype == OP_BUY)
     {
      price = AskPrice();
      if(StopLoss > 0)
         sl = NormalizeDouble(price - (StopLoss * POINT), DIGIT);
      if(TakeProfit > 0)
         tp = NormalizeDouble(price + (TakeProfit * POINT) + spread, DIGIT); // Adjust TP by adding spread
     }
   if(ordertype == OP_SELL)
     {
      price = BidPrice();
      if(StopLoss > 0)
         sl = NormalizeDouble(price + (StopLoss * POINT), DIGIT);
      if(TakeProfit > 0)
         tp = NormalizeDouble(price - (TakeProfit * POINT) - spread, DIGIT); // Adjust TP by subtracting spread
     }
   ticket = OrderSend(Symbol(), ordertype, lot, price, SlipPage, sl, tp, comment, MagicNumber, 0);
   if(ticket == -1)
      ShowError("Order " + OrderCmd(ordertype));
   return(ticket);
  }

Quoting naick

Disliked

{quote} OK. Thanks I got it what you are saying. can i get it in mql5 please...

Ignored

Quoting BestTraderEv

Disliked

{quote} {image} {image}

Ignored

Quoting ozkanim

Disliked

{quote} I changed the settings a bit. I think it shows the trend more accurately this way. I also take advantage of the mismatches where I circle when entering the trend direction. maybe it will be useful for you. {image}

Ignored

Quoting jeanlouie

Disliked

{quote} Seconds wasn't mentioned in the first post and the pic used was above 1min tf, I didn't get the need of seconds. Tick_HL_timeseconds - prints the seconds of the tick when highest and lowest price occurred - running live only - option to show the minute, only if tf is above 1min - styling, rotation pics are from the tester, though btcusd is live to run on {file} {image}

Ignored

Quoting BestTraderEv

Disliked

{quote}Thank you, but no, it won't be of any use for me. You just optimized the indicator for the specific section of the chart. This means only that the indicator has been optimized for the specific part of the chart post factum. And that is totally useless for the future. This is all I need: {image} The Nadaraya-Watson is still there, only with the signals, and the envelope lines turned off. We can start the analysis on H1: {image} And then switch to M15, or M5, or even M1, depending on a few factors. PS. You will be doing this useless exercise...

Ignored

Quoting ozkanim

Disliked

{quote} If the star signals do not belong to the nadaraya, which indicator do they belong to?

Ignored