I will code your EAs and Indicators for no charge | Page 3465 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #69,281
  • Jun 13, 2024 5:53am Jun 13, 2024 5:53am
Quoting BestTraderEv
{quote} We use OnStart() for Script.
I think a script would still work if you use Start()
  • #69,282
  • Jun 13, 2024 6:22am Jun 13, 2024 6:22am
Quoting aarkay
{quote} The EA still gets switched off (I mean unloaded) whenever I switch timeframe or make any adjustments in the inputs after first loading.
I will look for it later,

But Solution for now is:

  1. Stop the EA: Before you change the timeframe or adjust inputs, manually stop the EA by right-clicking on its chart and selecting "Expert Advisors" -> "Remove."
  2. Make your changes: Now modify the inputs or switch to a different timeframe.
  3. Reload the EA: Re-attach the EA to the chart to incorporate your modifications.

Quoting aarkay
Also, it enters a trade immediately on loading, instead of waiting for a signal.
The EA will immediately act on any active signal present when you first apply it to the chart. If you want the EA to wait for a fresh signal at the start of a new trend, follow these steps:

  1. Identify the Current Signal: When you apply the EA, observe if it opens a BUY or SELL position. This indicates the current active signal.
  2. Set Trade Direction: (Click on common tab, see image)

    1. If the EA opens a BUY, set the EA to "Short Only" to make it wait for a SELL signal.
    2. If the EA opens a SELL, set the EA to "Long Only" to make it wait for a BUY signal.


Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 4 KB
By doing this, the EA won't open a trade based on the initial signal. It will wait for a new signal in the opposite direction, effectively starting its trading at the beginning of a new trend.
  • #69,283
  • Jun 13, 2024 6:26am Jun 13, 2024 6:26am
Quoting MwlRCT
{quote} I will look for it later, But Solution for now is: Stop the EA: Before you change the timeframe or adjust inputs, manually stop the EA by right-clicking on its chart and selecting "Expert Advisors" -> "Remove." Make your changes: Now modify the inputs or switch to a different timeframe. Reload the EA: Re-attach the EA to the chart to incorporate your modifications. {quote} The EA will immediately act on any active signal present when you first apply it to the chart. If you want the EA to wait for a fresh signal at the start of a new trend,...

Will do. Thanks a lot for your valuable time !
  • #69,284
  • Jun 13, 2024 6:29am Jun 13, 2024 6:29am
Quoting Kefada
{quote} I think a script would still work if you use Start()
Yes, and if we use start() for Script, it will work, as well.
It is about backwards compatibility.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,285
  • Jun 13, 2024 6:38am Jun 13, 2024 6:38am
Quoting aarkay
{quote} Will do. Thanks a lot for your valuable time !
Also consider using Period 34, to both indicators, (It work best on M5)
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 25 KB

Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 36 KB

//
This is the setting i use.
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 21 KB
  • #69,286
  • Edited 9:10am Jun 13, 2024 7:26am | Edited 9:10am
Quoting aarkay
{quote} BestTraderEv, So true. I have indeed tried so many indicators. Only to fail again and again. It is always better to trade manually and I am a manual trader. However I found that the signals on this indicator are good even on the M1 chart. That's why I requested if a solution can be found. Maybe with proper account management, Risk management, and other options, this may turn out to one of the better ones.
Want to see something?
Look!
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_142215.jpg Size: 297 KB

I wouldn't pay attention to those arrows from Blue mode, at all!
Just None them out!
The arrows on the image come from the Candlestick alerts_BTE.

Now, I would not know how to automate this, because the arrows are a signal.
Then come those "clouds".
But the trade decision has to be made upon other factors, especially how the chart is forming (patterns), and on some fundamentals, too.

IOW, we need to be ready, or look out for Long at the bottom green arrow.
Then we need to wait for the chart pattern or Price Action.
Next we need to plot out the potential trade.
And we need to wait for some confirmation (the cloud starts forming, or other indicator).
If the price is right, we need to Buy.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_143120.jpg Size: 283 KB


Example of using other indicators:
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_143733.jpg Size: 363 KB

The idea is that we need to understand what the indicator is indicating, and we need to have experience with how the indicator works in reality.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,287
  • Jun 13, 2024 8:04am Jun 13, 2024 8:04am
Quoting BestTraderEv
{quote} Well, you see, I have been studying the Nadaraya-Watson Estimator, and I don't think it is wise to make any changes or additions to the original code. Your idea is specific, and it requires some unique combination of settings, plus instrument, plus timeframe, so it isn't universal. Also, your idea can be used for any other envelope or channel-type indicator. So, I think it is better to code a unique indicator for you which will use the data from the N_W Estimator. And, as you will see in the image: {image} your idea will not always work....
Thanks for the reply, but I disagree.
This strategy works on all existing instruments, forex, indices, crypto.
Whoever taught it to me has been using it for 20 years.
You have to apply an envelope deviation at 0.075 and then follow the trend. You loaded the indicator I sent you without setting it.
Would you be able to make the change I asked you for?
  • #69,288
  • Edited 8:56am Jun 13, 2024 8:38am | Edited 8:56am
Quoting lukgoku
{quote} Thanks for the reply, but I disagree. This strategy works on all existing instruments, forex, indices, crypto. Whoever taught it to me has been using it for 20 years. You have to apply an envelope deviation at 0.075 and then follow the trend. You loaded the indicator I sent you without setting it. Would you be able to make the change I asked you for?
OK, here you are, with evidence:
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_153704.jpg Size: 265 KB

However, you also said:
Quote
and then follow the trend.
Attached File(s)
File Type: mq4 Nadaraya-Watson_Estimator_Envelopes_BreakReversAlerts.mq4   17 KB | 431 downloads
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,289
  • Jun 13, 2024 8:49am Jun 13, 2024 8:49am
Quoting MwlRCT
{quote} Also consider using Period 34, to both indicators, (It work best on M5) {image} {image} // This is the setting i use. {image}


Really grateful !
  • #69,290
  • Jun 13, 2024 8:53am Jun 13, 2024 8:53am
Quoting BestTraderEv
{quote} Want to see something? Look! {image} I wouldn't pay attention to those arrows from Blue mode, at all! Just None them out! The arrows on the image come fron the Candlestick alerts_BTE. Now, I would not know how to automate this, because the arrows are a signal. Then come those "clouds". But the trade decision has to be made upon other factors, especially how the chart is forming (patterns), and on some fundamentals, too. IOW, we need to be ready, or look out for Long at the bottom green arrow. Then we need to wait for the chart pattern or...


Thanks for splashing cold water !!! But more so, thanks for bothering to reply. Such a pity. An indicator with clear buffer codes in the inputs and useless !!!
  • #69,291
  • Jun 13, 2024 9:08am Jun 13, 2024 9:08am
Quoting BestTraderEv
{quote} OK, here you are, with evidence: {image} However, you also said: {quote} {file}
Ok ok I understand what you are saying: with this version of Nadaraya you have to find the correct envelope deviation value for each timeframe...true but it is not a problem for me, using Luxalgo's indicator I find the correct values and create the template for each timeframe.
In the indicator you attached there is an alert, does it work as I asked?
  • #69,292
  • Jun 13, 2024 9:08am Jun 13, 2024 9:08am
Quoting aarkay
{quote} Thanks for splashing cold water !!! But more so, thanks for bothering to reply. Such a pity. An indicator with clear buffer codes in the inputs and useless !!!
I wouldn't say it's useless.
You should understand that there is no indicator by which any EA can trade automatically without human supervision, and make money.
The codes which actually make money for big hedge funds are not based on any such indicators.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,293
  • Jun 13, 2024 9:13am Jun 13, 2024 9:13am
Quoting lukgoku
{quote} Ok ok I understand what you are saying: with this version of Nadaraya you have to find the correct envelope deviation value for each timeframe...true but it is not a problem for me, using Luxalgo's indicator I find the correct values and create the template for each timeframe. In the indicator you attached there is an alert, does it work as I asked?
That's how I coded it.
Now you must test it in real time.
Obviously, I didn't have enough time to test it, yet.

Though, you must also understand, that the lines do repaint some, so what we see in the past is not neccessarily what was at that time,
so alerts will not trigger, because at the time at least one condition wasn't met.

And, sure, I can see how somebody could profit on this strategy.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,294
  • Jun 13, 2024 9:20am Jun 13, 2024 9:20am
Quoting BestTraderEv
{quote} That's how I coded it. Now you must test it in real time. Obviously, I didn't have enough time to test it, yet. Though, you must also understand, that the lines do repaint some, so what we see in the past is not neccessarily what was at that time, so alerts will not trigger, because at the time at least one condition wasn't met.
But of course you are very kind and above all you are very knowledgeable, I absolutely do the tests and keep you updated.
Great, can you get an arrow to appear on the chart at the entry candle?
  • #69,295
  • Edited 9:39am Jun 13, 2024 9:25am | Edited 9:39am
Quoting lukgoku
{quote} But of course you are very kind and above all you are very knowledgeable, I absolutely do the tests and keep you updated. Great, can you get an arrow to appear on the chart at the entry candle?
I could, but considering what I wrote above, the arrow may be visible on the historical chart, but not in real time.
For example, the second candle didn't open above the envelope in realtime, so there was no arrow and no alert, but when the second
candle became the third, or fourth candle, the arrow is now showing there, because the envelope line repainted.

That's one reason why all arrow indicators on historical bars are simply BS.
I don't know why anybody did this trick?
Probably because they wanted to scam people showing them how beautifully it looks in history!

Look!
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_162934.jpg Size: 254 KB

I have arrows, but they are from the candlestick patterns indicator.
Attached File(s)
File Type: mq4 Candlestick alerts_BTE.mq4   37 KB | 503 downloads

If you want to see only the arrows, you can apply this preset:
Attached File(s)
File Type: rar Candlestick alerts.rar   < 1 KB | 436 downloads


And, yeah, if the market is trending, this absolutely makes sense.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_163828.jpg Size: 249 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,296
  • Jun 13, 2024 9:35am Jun 13, 2024 9:35am
Hi, can anyone here code an EA which cancels pending orders when certain price level is reached for ctrader platform? Thanks.
  • #69,297
  • Jun 13, 2024 9:39am Jun 13, 2024 9:39am
Quoting BestTraderEv
{quote} I could, but considering what I wrote above, the arrow may be visible on the historical chart, but not in real time. For example, the second candle didn't open above the envelope in realtime, so there was no arrow and no alert, but when the second candle became the third, or fourth candle, the arrow is now showing there, because the envelope line repainted. That's one reason why all arrow indicators on historical bars are simply BS. I don't know why anybody did this trick? Probably because they wanted to scam people showing them how beautifully...
OK I test only with the alert in 1m, 5m and 15m just to have more signals to compare, obviously in trend even if only with forex the countertrend can be done, let's say it is less dangerous than on other instruments

For the time being I thank you and will update you soon.
  • #69,298
  • Jun 13, 2024 9:49am Jun 13, 2024 9:49am
Quoting lukgoku
{quote} OK I test only with the alert in 1m, 5m and 15m just to have more signals to compare, obviously in trend even if only with forex the countertrend can be done, let's say it is less dangerous than on other instruments For the time being I thank you and will update you soon.
I just got an alert, so it's working.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_165018.jpg Size: 338 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,299
  • Jun 13, 2024 9:52am Jun 13, 2024 9:52am
Quoting karty555
Hi, can anyone here code an EA which cancels pending orders when certain price level is reached for ctrader platform? Thanks.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-06-13_165224.jpg Size: 12 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #69,300
  • Jun 13, 2024 10:09am Jun 13, 2024 10:09am
Quoting BestTraderEv
{quote} I could, but considering what I wrote above, the arrow may be visible on the historical chart, but not in real time. For example, the second candle didn't open above the envelope in realtime, so there was no arrow and no alert, but when the second candle became the third, or fourth candle, the arrow is now showing there, because the envelope line repainted. That's one reason why all arrow indicators on historical bars are simply BS. I don't know why anybody did this trick? Probably because they wanted to scam people showing them how beautifully...
BestTraderEv,
I'm sorry, but I didn't understand what I could use these arrows from the candlestick patterns indicator.
135 traders viewing now, 1 is registered:
Skyrider60