Menu

Options

Bookmark Thread

First Page First Unread Last Page Last Post

Print Thread

Similar Threads

I will code your pivot EAs for no charge 25 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

Quoting BestTraderEv
{quote} No, the EA is not disabled! It is removed from the chart. This is a big difference! Please refresh my previous post and read it again! https://www.forexfactory.com/thread/...6#post14816186
yes...you are right...ea is removed from chart...I used an incorrect word
ea is removed from chart when all positions are close and then I have to put manually ea again when there are some conditions
Quoting carbonmimeti
{quote} yes...you are right...ea is removed from chart...I used an incorrect word ea is removed from chart when all positions are close and then I have to put manually ea again when there are some conditions
So, in order to have a button, I need to create an indicator which will create this button and service the functions of the button.
In this case, I suggest it is better to use a saved template with this indicator and the EA, and all the other indicators which you need.
So, you will need to put everything on your chart, save the template, and then you can use the button only.
You will not have to manually apply the template from then on.

PS. Though, I would just use a template without any buttons, or extra indicators.
It only takes two mouse clicks...
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} So, in order to have a button, I need to create an indicator which will create this button and service the functions of the button. In this case, I suggest it is better to use a saved template with this indicator and the EA, and all the other indicators which you need. So, you will need to put everything on your chart, save the template, and then you can use the button only. You will not have to manually apply the template from then on. PS. Though, I would just use a template without any buttons, or extra indicators. It only takes two mouse...
you wrote:I suggest it is better to use a saved template with this indicator and the EA, and all the other indicators which you need.

ok!!
please any trader here rather than press on new order button, manually use hotkey from the computer keyboard to place buy, sell and close trade?
the script to hotkey method is not reliable
Quoting carbonmimeti
{quote} you wrote:I suggest it is better to use a saved template with this indicator and the EA, and all the other indicators which you need. ok!!
There is a problem I didn't consider.
When using the ChartApplyTemplate() function, unfortunatelly the Algo Trading permissions are denied for the program, for safety reasons, and
the trader must manually select the "Allow Algo Trading" box in the EA Common tab.
Which requires a number of additional clicks.
Which means that using a button to attach the EA will always create this issue, and there is no programming way to avoid this.
Therefore, the simplest solution is to apply a template from MT5 chart level by right mouse click on chart -> Templates -> click on chosen template.
In this case the Algo Trading permissions are not denied.

It would be much easier if your EA didn't remove itself from the chart, but simply stopped trading under the conditions, and the button in the EA would be used to reset the conditions, so the EA would start trading again.
And that would also be quicker, because attaching the EA by a button creates a certain lag in MT5, while a simple reset of variables would not create any lag.

I can do that. Add a button to the EA, and while the button is Off, the EA will not trade.
It doesn't need to be removed from the chart.
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
the button in the EA would be used to reset the conditions, so the EA would start trading again.

ok...proceed this way...thank you
Quoting BestTraderEv
{quote} The arcs are also based on the idea of cycles. I'm not convinced that cycles play a big role in CFD Forex speculation and gambling... The whole Fibonacci idea is also not based on any scientific evidence. I look at it like this: It may be true that everything tends towards the Golden Mean, (or it's only confirmation bias) It may be true that things tend to develop similar to the Fibo Spiral, (or it's only confirmation bias) It may even be true that the Price tends to trend in the same way, (or it's only confirmation...
please,observe carefully this chart https://www.forexfactory.com/thread/...5#post14510535

everyone talks about the price....no one about the Time.
the most obvious cycle is the two-day cycle divided into 2 cycles of 1 day or 3 shorter cycles. Sometimes even the 2-day cycle "disappears" and when this happens you need to see the higher cycles, i.e. 4 or 7/8 days . it is normal that each cycle, from the smallest to the largest, has a certain TIME WINDOW within which it ends. For example on the 1 minute chart, the standard 30 minute cycle goes from a minimum of 22 bars to a maximum of 32.

the graph below is AUDUSD 15min chart and as you can see it created a lot of problems for me during the cycles....so then I decided to see the upper cycle.....and as if by magic the 7th appeared.. .coincidentally!
everything is cyclical... even our life... and therefore the financial markets are also cyclical; the problem is that it is not a "linear" cyclicality but has a different nature.
normally I understand that the TIME WINDOW corresponds to 25% of the cycle itself and I'll stop here as I don't want to become boring
Attached Image (click to enlarge)
Click to Enlarge Name: AUD 00.gif Size: 34 KB
So we said Vinesh's indicator was crap but yesterday it said TP of today where Xauusd is. So it was wrong for SL but correct for TP. Very interesting.
Quoting carbonmimeti
the button in the EA would be used to reset the conditions, so the EA would start trading again. ok...proceed this way...thank you
Ok, so I followed the code and created the Button.
However, I am totally confused on how this is all working.
In the code, when the first Buy is opened, there is a variable (CloseEA) which is set to value 1.
This variable executes the CK_Chiusura_EA() function.
This means that in the original version the EA was removed from the chart.
In my version the Button is set to Off, and the EA does not execute the code.
When you explained the idea of the EA, you said that it was "disabled" when all the trades were closed.
So, I really don't understand.

I also can see that this code is a lot of mess.
Someone took a code from different EA and used it to create this one, it looks like that.

Anyways, test it and see if it's ok or not?
Attached File(s)
File Type: mq5 HIGH FREQUENCY1min BT.mq5   54 KB | 168 downloads
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting carbonmimeti
{quote} please,observe carefully this chart https://www.forexfactory.com/thread/...5#post14510535 everyone talks about the price....no one about the Time. the most obvious cycle is the two-day cycle divided into 2 cycles of 1 day or 3 shorter cycles. Sometimes even the 2-day cycle "disappears" and when this happens you need to see the higher cycles, i.e. 4 or 7/8 days . it is normal that each cycle, from the smallest to the largest, has a certain TIME WINDOW within which it ends. For example on the 1 minute chart, the standard...
If you read carefully what you have written in your post, I mean very carefully, many times, you might finally understand that what you wrote means exactly that there are no fixed cycles which we can rely on. It's just your imagination and confirmation bias. Please learn what confirmation bias is!
First you say "it is obvious", and in the next sentence you say "Sometimes even the 2-day cycle "disappears"".
Those two are contradictory - so You need to listen more carefully to Your own words - how they contradict.
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting MasterM
So we said Vinesh's indicator was crap but yesterday it said TP of today where Xauusd is. So it was wrong for SL but correct for TP. Very interesting.
You are interpreting this wrong.
The indicator wasn't wrong or correct about anything.
The indicator didn't know anything, so it couldn't be wrong or correct.
The indicator was only showing whatever it was showing, and the price only did what it did.
One has absolutely nothing to do with the other.
The indicator has no causality on what the price does.
And, what the price does later has no causality on what the indicator showed.
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} Which indicator? I plotted the lines manually - by hand. It is called "Draw trendline". Though, come to think about it, you could use this one: {file} {image} Example: Monthly trend on Weekly chart: {image} {image} However, the best indicator is the trader's skill to interpret the chart!!!
thank you so so much
Quoting BestTraderEv
{quote} Ok, so I followed the code and created the Button. However, I am totally confused on how this is all working. In the code, when the first Buy is opened, there is a variable (CloseEA) which is set to value 1. This variable executes the CK_Chiusura_EA() function. This means that in the original version the EA was removed from the chart. In my version the Button is set to Off, and the EA does not execute the code. When you explained the idea of the EA, you said that it was "disabled" when all the trades were closed. So, I really don't...
In my version the Button is set to Off, and the EA does not execute the code......it is ok,great job...thank you very much!!!

Someone took a code from different EA and used it to create this one...yes you are right,my friend he copied another one of ours and it was similar to this one...you're a fox... nothing escapes you!!:)

sorry for some misunderstandings but consider that English is not my native language... I translate a little and I help myself a little with Google Translator.
regarding the 2-day cycle, I meant that it is not the most obvious one but the most identifiable in the short term
problem:
1)button is on
2)ea enters the position and the button becomes off but by doing so the ea is no longer able to sell
3) the button must become OFF after all positions have been sold
thank you
Please add MTF
Attached File(s)
File Type: mq4 ATR Bands 48 outer entry-exit 3.4.mq4   19 KB | 238 downloads
BTC Grid Return Today: na
Quoting BestTraderEv
{quote} OK, so let me show you something: {image} Of course, this is on historical candles - clicked on the candle where the VLine is. So, it all looks great! However, the problem is always what to do here, for example: {image} If you held the first Short until TP, you made a profit. If you closed before TP and turned to Long, you lost. Therefore, I can't rely on such insufficient ammount of information. I need more information: {image} Because I need to know why to trade Short, and not to trade Long. Or, why and when to trade Long... And, as we...
Hello Best Trader,

On Last Image you have a panel tat display GBUSD on MN1,W1 & D1, Question;
1. Can it display EURUSD on GBPUSD Chart. Panel display EU & Chart GU.
2. Can you share if it can do above.

Thanks
Quoting carbonmimeti
problem: 1)button is on 2)ea enters the position and the button becomes off but by doing so the ea is no longer able to sell 3) the button must become OFF after all positions have been sold thank you
Yes, but I wrote about this in the previous post.
I didn't change anything in the original code - I only used the already existing functions to operate the button.
I will take a look, of course.

Line 421 there is the function void PrimoIngresso() .
This translates to FirstEntry .
Line 441 sends the request for the position and checks for errors.
From Line 442 to Line 458 sets the variables if order was successfull (no errors).
In Line 451 we read CloseEA=1; - and when CloseEA = 1
in Line 452 fGVS("_CloseEA",CloseEA);
This sets the GlobalVariable to the value 1.
And when CloseEA=1; the EA executes Line 398
Inserted Code
// Toglie EA dal grafico  
   if(CloseEA==1){
      CK_Chiusura_EA();
      }
I will change the value in Line 451.
And you can ask your friend why it was CloseEA=1;
Attached File(s)
File Type: mq5 HIGH FREQUENCY1min BT.mq5   54 KB | 225 downloads

Now in Line 451 CloseEA=0;
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting daggi22
{quote} Hello Best Trader, On Last Image you have a panel tat display GBUSD on MN1,W1 & D1, Question; 1. Can it display EURUSD on GBPUSD Chart. Panel display EU & Chart GU. 2. Can you share if it can do above. Thanks
Yes, it can display any instrument and any chart. Up to 30 mini charts.
You can find the indicator here:
https://www.forexfactory.com/thread/...hart-indicator

Yiou can see an example here:
https://www.forexfactory.com/attachm...1?d=1698404762
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} Yes, it can display any instrument and any chart. You can find the indicator here: https://www.forexfactory.com/thread/...hart-indicator
Best Trader,
Thanks for the pointer. Very helpful.

Regards
Can you convert this indicator to mt5? Thank you.
Attached File(s)
File Type: ex4 Extreme_Spike-123.ex4   28 KB | 181 downloads
File Type: mq4 Extreme_Spike-123.mq4   17 KB | 250 downloads
67 traders viewing now, 2 are members:
BestTraderEv
,
gemy873