I will code your EAs and Indicators for no charge | Page 3352 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #67,021
  • Mar 9, 2024 12:15am Mar 9, 2024 12:15am
Could anyone be so kind to convert this MT4 indi to MT5? It looks such a simple sub chart line indicator, so I tried by myself but was not successful. Thanks in advance!
Attached File(s)
File Type: mq4 sayabarcrossview.mq4   2 KB | 418 downloads
  • #67,022
  • Mar 9, 2024 4:02am Mar 9, 2024 4:02am
Quoting jeanlouie
{quote} Your pic doesn't show the chart candles, those look like heiken ashi candles, and the chart candles/bars/line, if present, can't be seen, the chart symbol can't be seen either to see if it's a regular live chart or an offline chart doing something uncommon. Does the issue persist on an empty normal live chart? Anyhow I can't replicate the issue on a live chart. The gif below is in the tester and it runs as expected as well as on a live 1min chart, the only way to kind-of replicate the issue is to run it in the tester with open prices only,...
I use synergy candles to reduce chart noise. the indicator recognizes mt4 candles and not this indicator. If you tested it and it's working, I have to check what problem I have here. It could be another indicator that is causing a conflict or even some configuration of my mt4.
  • #67,023
  • Mar 9, 2024 4:37am Mar 9, 2024 4:37am
Hi BestTraderEv,

I hope all is well with you.

I have a question & a request. Is there an Semafor indicator that is a true NRP? I have tried 3 that say NPR, but when observed on a1Min. time frame they constantly repaint. I have on a 15M chart marked with arrows the highs lows printed by the Semafor & again even after going for several candle past Semafor signals there is repainting. Once the candles close there should be no more repainting or recalculating occurring? Is that correct?

My request is for one of the Semafor indicators to be coded as such that there is no longer repainting once the candle has closed. If you think this is worthwhile idea & you have an interest in coding this, I will post a Semafor indicator for you to work with. If you deem this as not a good idea worth the time & effort I totally understand & will respect your views.

Thank you for kindly sharing your skills with the trading community.
  • #67,024
  • Mar 9, 2024 5:08am Mar 9, 2024 5:08am
Quoting BestTraderEv
{quote} Nah, you need to get through this on your own. You already have enough experience, and you've already come a long way. So, if you get this on your own, you won't ask for help any more.
Let me re-think again the logic of my loop. Thanks
  • #67,025
  • Mar 9, 2024 5:54am Mar 9, 2024 5:54am
Quoting chimoong
{quote} Let me re-think again the logic of my loop. Thanks
What is 5+=10 ? (this is just to represent a value for a variable at a given loop cycle)
Now, if we loop that, what do we get?
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #67,026
  • Mar 9, 2024 5:58am Mar 9, 2024 5:58am
Quoting BestTraderEv
{quote} What is 5+=10 ? (this is just to represent a value for a variable at a given loop cycle) Now, if we loop that, what do we get?
Of course, keep on adding 10.
  • #67,027
  • Mar 9, 2024 6:20am Mar 9, 2024 6:20am
Quoting siglot
Good Day Great Coders. Blessing to any developer who can help me make this indicator MTF (Multi-Timeframe). The indicator is so good that one can adopt a layered approach to ensure accurate entry on smaller timeframe as shown in the picture below. {image} E.g. You can get a signal on a higher timeframe (e.g. M5) and use the exact repeat of the same indicator as entry on a smaller TF (e.g. M1) I have taken a godly amount of time to back test it and I can assure it's not a waste of time. I pray someone here be able to help with the MTF problem.......
I don't know what you're seeing, but I'm seeing total nonsense.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-03-09_131823.jpg Size: 209 KB

You cherry-picked some individual situation - that's what it looks like to me.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #67,028
  • Mar 9, 2024 6:23am Mar 9, 2024 6:23am
Quoting romulorios
{quote} I use synergy candles to reduce chart noise. the indicator recognizes mt4 candles and not this indicator. If you tested it and it's working, I have to check what problem I have here. It could be another indicator that is causing a conflict or even some configuration of my mt4.
Would be nice if you could check the logs (Experts tab in Terminal window) for errors like "array out of range" or "zero divide".
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #67,029
  • Edited 6:50am Mar 9, 2024 6:37am | Edited 6:50am
Quoting acetrader
Hi BestTraderEv, I hope all is well with you. I have a question & a request. Is there an Semafor indicator that is a true NRP? I have tried 3 that say NPR, but when observed on a1Min. time frame they constantly repaint. I have on a 15M chart marked with arrows the highs lows printed by the Semafor & again even after going for several candle past Semafor signals there is repainting. Once the candles close there should be no more repainting or recalculating occurring? Is that correct? My request is for one of the Semafor indicators to be coded as...
They're not repainting - they are appearing and disappearing.
They appear when conditions are met, and disappear when the conditions are gone.
Also, if they are rejected before a certain number of candles is closed, they disappear.
We can't code a true NRP indicator unless we just leave all the signals which ever appeared, and we will get a big mess.
The idea is for the signal to be somehow confirmed by the Price Action before it becomes a viable signal.
If the trader wants to react to every signal without paying attention to the Price Action patterns, they will get a lot of Stop Losses.

Here is a good example:
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-03-09_134227.jpg Size: 279 KB

The Semafor is showing a Bullish Signal.
What does that mean?
It means - watch out for POTENTIAL reversal.
It does not mean that we should already trade Long.
Unless we have a good reason to trade Long!
But, can we see any significant Bull Power???
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-03-09_134816.jpg Size: 376 KB


You see, the Trader must be smarter than the indicator.
If the indicator is smarter than the Trader, nothing good can come out of such a situation.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #67,030
  • Mar 9, 2024 7:36am Mar 9, 2024 7:36am
Quoting BestTraderEv
{quote} They're not repainting - they are appearing and disappearing. They appear when conditions are met, and disappear when the conditions are gone. Also, if they are rejected before a certain number of candles is closed, they disappear. We can't code a true NRP indicator unless we just leave all the signals which ever appeared, and we will get a big mess. The idea is for the signal to be somehow confirmed by the Price Action before it becomes a viable signal. If the trader wants to react to every signal without paying attention to the Price Action...
Hi BestyTraderEv,

Now I have a solid understanding of what Semafor is doing from your explanation. Again, your clear logic & explaining of that logic makes perfect sense. Thank you again, for all you do for the trading community.
  • #67,031
  • Mar 9, 2024 8:08am Mar 9, 2024 8:08am
hi im new to this thread

is it possible to draw circles instead of trendlines

ive tried and tried but only received errors in this
please help
Attached File(s)
File Type: mq4 HtfHiLoMe-edition (1).mq4   12 KB | 379 downloads
  • #67,032
  • Mar 9, 2024 8:29am Mar 9, 2024 8:29am
jeanlouie could you give an alert to this fractal indicator?
  • #67,033
  • Mar 9, 2024 10:18am Mar 9, 2024 10:18am
Hi great coder,
How can we code a modified exponential MA ? let's say i want to calculate an EMA of last 6, bars but using our define PA, instead of default close price. example: i want to use (open+high+low+close+close)/ 5 or just (open+close)/2... how can i code it ? any clue ? Thank you in advance for your help
don't worry! ,but be happy...
  • #67,034
  • Edited 1:24pm Mar 9, 2024 1:00pm | Edited 1:24pm
Quoting Hknmatata
Hi great coder, How can we code a modified exponential MA ? let's say i want to calculate an EMA of last 6, bars but using our define PA, instead of default close price. example: i want to use (open+high+low+close+close)/ 5 or just (open+close)/2... how can i code it ? any clue ? Thank you in advance for your help
Attached File(s)
File Type: mq4 AllAverages v4.9.mq4   79 KB | 381 downloads

And another one:
Attached File(s)
File Type: ex4 averages - mtf - alerts 8.9.ex4   150 KB | 368 downloads
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #67,035
  • Mar 9, 2024 1:55pm Mar 9, 2024 1:55pm
Quoting BestTraderEv
{quote} Would be nice if you could check the logs (Experts tab in Terminal window) for errors like "array out of range" or "zero divide".
BestTraderEv, I checked where you indicated and it does not show these errors reported by you. I noticed that it updates one signal or another, but when I update the tamplate it shows other signals. I wanted it to work well, because it is very useful in my operations.
  • #67,036
  • Edited 2:58pm Mar 9, 2024 2:25pm | Edited 2:58pm
Quoting romulorios
{quote} BestTraderEv, I checked where you indicated and it does not show these errors reported by you. I noticed that it updates one signal or another, but when I update the tamplate it shows other signals. I wanted it to work well, because it is very useful in my operations.
Can't do anything without the source code...
Try switching between timeframes after applying a template.
But, you know, this is an indicator by jeanlouie, and he knows what he is doing, so I doubt that he coded anything incorrectly.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #67,037
  • Edited 3:47pm Mar 9, 2024 3:06pm | Edited 3:47pm
Hello,
Is anyone here capable of helping me for free and if its too much asked i could pay a few € aswell...
Im looking for something that can extract my metatrader 5 rectangle to a image/paint. So the whole rectangle

Basically when i markup zones with candles in it. I want that zone (rectangle) as a image in paint. So a screenshot of the rectangle only. Check attachments

Hope someone can help me
Cheers
Attached Image (click to enlarge)
Click to Enlarge Name: 20240306_083412.jpg Size: 3.9 MB
  • #67,038
  • Mar 9, 2024 3:37pm Mar 9, 2024 3:37pm
Quoting BestTraderEv
{quote} Can't do anything without the source code... Try switching between timeframes after applying a template. But, you know, this is an indicator by jeanlouie, and he knows what he is doing, so I doubt that he coded anything incorrectly.
true. He has experience
  • #67,039
  • Mar 9, 2024 5:24pm Mar 9, 2024 5:24pm
i would like to develop a scanner to find the top gainers or losers forex pairs for historical data there are some out there but they only show last close and present data can anyone help me out with this plz thanks
  • #67,040
  • Mar 9, 2024 6:37pm Mar 9, 2024 6:37pm
Dear Traders, does anyone has a decent indicator which has buttons to easily change templates on your chart. So far I can't find a decent one. These 2 which I found in the internet looks great but it will "remove itself" after change to another template. Is there any coders who can solve the mystery?
Attached File(s)
File Type: ex4 ! MKFX Template switcher.ex4   15 KB | 382 downloads

Attached File(s)
File Type: mq4 ! MKFX Template switcher.mq4   11 KB | 454 downloads

Attached File(s)
File Type: ex4 ! Template_switcher_2.ex4   19 KB | 390 downloads

Attached File(s)
File Type: mq4 ! Template_switcher_2.mq4   19 KB | 416 downloads
80 traders viewing now, 1 is registered:
bibu