I will code your EAs and Indicators for no charge

And another day is gone ,good night friend.

This indicator may be an option
https://www.forexfactory.com/thread/...2#post13173842

Thank you very much my friend, for your helps, ideas ,clues and every thing ... i will try it, do it my best.
about the arrow, i find that the limit bar was wrong inside the function ... because of calling the indicatorCounted(,
i will try to think and do it again later in my free time ... Subply & demand zone is also my target to solve later ... still trying to think the logic behind it, may be not only using Open - Close price for calculation, but also other kind of price .... have a nice &happy day ...

hello coders and traders
please do any one have an indicator that draw two horizontal lines on the High & Low of the candle of 2 MA Crossover ?
thanks alot

Does anyone know (or can make) an indicator that shows the average of a selected range of candles(with noth a horizontal line and the price of the average value)? The selection is made by 2 vertical lines and preferably, as the either line is moved by the trader, the horizontal average line dynamically changes to reflect the new average.

thank you for your help and option Sir, i have checked both this and your v1.1,
the attached image is my area of interest, not really the price scale, i was looking for a price grid with decimals option, as example if you want 15.5 on the attached you put in 155
the grid lines on the one i attached is in points so it allows for decimals count, please i dont mind if you will add such option in yours

Hi John4y, is there a way to print/plot in numbers the ATR of the last 20 days on the upper right of the daily chart. Maybe set the size of the numbers as an variable.
Thanks Carlos

hello brother
you can simply apply it using Fibo Level 50%

Hello FF traders!

Does anyone have a pips ruler (OG: by jeanlouie) for MT5? or anything similar? (see image below)

I just need to see the pips indicated on my rectangles

Thank you!

Average_Price_between_2vlines
- draggable lines with an average price text
- optional prices to use for averaging: bodies, full candles, opens, highs, lows, closes

Hello everybody! Does anyone have the chart in chart indicator editable?

Hello
I need indicators ( if it already exists then please refer one)

1. Horizontal ray indicator with or without price label. I just click and a horizontal ray is added. I use horizontal rays alot even to the point that my mt5 is a bit bloated and i cant open much charts and have to pick 8 - 10 only. There was one called SN Lines which used to do the job but then the chart gets bloated and after few days i need to do the same work again (templated get bloated too). I use horizontal lines but these are as expected shown on previous charts too.

This needs to be very lightweight. If it a script which converts the default trend lines into horizontal rays then it would be the best as for the default trend line it is possible to change its settings to ray on one side but not as horizontal ray

2. Day Open line indicator which have the option to expire on the same day chart.

3. Rectangle which color could be changed by clicking it again and again

Tip 101
Have you tried the default chart in chart option in mt5. It does gives all the options (right click it), then you can save it as a template too

gooday

this EA isnt opening trades and also doesnt work on backtest, please someone help fix it and clean the code, i suspect it has many bugs

Here is a nice Fibo! If doesn't works may sure that in the object the number fibo is check and click show.

Hi. Are you able to create an Expert Advisor that will open trades on a buy or sell signal from the Indicator 'MA Crossover Alert', with a variable lot prescription?

I can only attach the code for the Indicator.

//+------------------------------------------------------------------+
//| MA-Crossover_Alert.mq4 |
//| Copyright 2005, Jason Robinson (jnrtrading) |
//| http://www.jnrtading.co.uk |
//| Modified by Robert Hill to add LSMA and alert or send email |
//| Added Global LastAlert to try to have alert only on new cross |
//| but does not seem to work. So indicator does alert every bar |
//+------------------------------------------------------------------+
/*
+------------------------------------------------------------------+
| Allows you to enter two ma periods and it will then show you at |
| Which point they crossed over. It is more usful on the shorter |
| periods that get obscured by the bars / candlesticks and when |
| the zoom level is out. Also allows you then to remove the mas |
| from the chart. (emas are initially set at 5 and 20) |
+------------------------------------------------------------------+
*/
#property copyright "Copyright 2005, Jason Robinson (jnrtrading)"
#property link "http://www.jnrtrading.co.uk"
#property indicator_chart_window
#property indicator_buffers 2
#property indicator_color1 LawnGreen
#property indicator_color2 Red
extern bool SoundON=true;
extern bool EmailON=false;
extern int FastMA_Mode = 1; //0=sma, 1=ema, 2=smma, 3=lwma, 4=lsma
extern int FastMA_Period = 5;
extern int FastPriceMode = 0;//0=close, 1=open, 2=high, 3=low, 4=median(high+low)/2, 5=typical(high+low+close)/3, 6=weighted(high+low+close+close)/4
extern int SlowMA_Mode = 1; //0=sma, 1=ema, 2=smma, 3=lwma, 4=lsma
extern int SlowMA_Period = 20;
extern int SlowPriceMode = 0;//0=close, 1=open, 2=high, 3=low, 4=median(high+low)/2, 5=typical(high+low+close)/3, 6=weighted(high+low+close+close)/4
double CrossUp[];
double CrossDown[];
int flagval1 = 0;
int flagval2 = 0;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
SetIndexStyle(0, DRAW_ARROW, EMPTY, 1);
SetIndexArrow(0, 233);
SetIndexBuffer(0, CrossUp);
SetIndexStyle(1, DRAW_ARROW, EMPTY, 1);
SetIndexArrow(1, 234);
SetIndexBuffer(1, CrossDown);
GlobalVariableSet("AlertTime"+Symbol()+Period(),CurTime());
GlobalVariableSet("SignalType"+Symbol()+Period(),OP_SELLSTOP);
// GlobalVariableSet("LastAlert"+Symbol()+Period(),0);
//----
return(0);
}
//+------------------------------------------------------------------+
//| Custom indicator deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----
GlobalVariableDel("AlertTime"+Symbol()+Period());
GlobalVariableDel("SignalType"+Symbol()+Period());
// GlobalVariableDel("LastAlert"+Symbol()+Period());
//----
return(0);
}
//+------------------------------------------------------------------+
//| LSMA with PriceMode |
//| PrMode 0=close, 1=open, 2=high, 3=low, 4=median(high+low)/2, |
//| 5=typical(high+low+close)/3, 6=weighted(high+low+close+close)/4 |
//+------------------------------------------------------------------+
double LSMA(int Rperiod, int prMode, int shift)
{
int i;
double sum, pr;
int length;
double lengthvar;
double tmp;
double wt;
length = Rperiod;

sum = 0;
for(i = length; i >= 1 ; i--)
{
lengthvar = length + 1;
lengthvar /= 3;
tmp = 0;
switch (prMode)
{
case 0: pr = Close[length-i+shift];break;
case 1: pr = Open[length-i+shift];break;
case 2: pr = High[length-i+shift];break;
case 3: pr = Low[length-i+shift];break;
case 4: pr = (High[length-i+shift] + Low[length-i+shift])/2;break;
case 5: pr = (High[length-i+shift] + Low[length-i+shift] + Close[length-i+shift])/3;break;
case 6: pr = (High[length-i+shift] + Low[length-i+shift] + Close[length-i+shift] + Close[length-i+shift])/4;break;
}
tmp = ( i - lengthvar)*pr;
sum+=tmp;
}
wt = sum*6/(length*(length+1));

return(wt);
}

//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int start() {
int limit, i, counter;
double tmp=0;
double fastMAnow, slowMAnow, fastMAprevious, slowMAprevious;
double Range, AvgRange;
int counted_bars=IndicatorCounted();
//---- check for possible errors
if(counted_bars<0) return(-1);
//---- last counted bar will be recounted
if(counted_bars>0) counted_bars--;
limit=Bars-counted_bars;

for(i = 0; i <= limit; i++) {

counter=i;
Range=0;
AvgRange=0;
for (counter=i ;counter<=i+9;counter++)
{
AvgRange=AvgRange+MathAbs(High[counter]-Low[counter]);
}
Range=AvgRange/10;

if (FastMA_Mode == 4)
{
fastMAnow = LSMA(FastMA_Period, FastPriceMode, i);
fastMAprevious = LSMA(FastMA_Period, FastPriceMode, i+1);

}
else
{
fastMAnow = iMA(NULL, 0, FastMA_Period, 0, FastMA_Mode, FastPriceMode, i);
fastMAprevious = iMA(NULL, 0, FastMA_Period, 0, FastMA_Mode, FastPriceMode, i+1);
}
if (SlowMA_Mode == 4)
{
slowMAnow = LSMA( SlowMA_Period, SlowPriceMode, i);
slowMAprevious = LSMA( SlowMA_Period, SlowPriceMode, i+1);
}
else
{
slowMAnow = iMA(NULL, 0, SlowMA_Period, 0, SlowMA_Mode, SlowPriceMode, i);
slowMAprevious = iMA(NULL, 0, SlowMA_Period, 0, SlowMA_Mode, SlowPriceMode, i+1);
}

if ((fastMAnow > slowMAnow) && (fastMAprevious < slowMAprevious))
{
if (i == 1 && flagval1==0){ flagval1=1; flagval2=0; }
CrossUp[i] = Low[i] - Range*0.75;
}
else if ((fastMAnow < slowMAnow) && (fastMAprevious > slowMAprevious))
{
if (i == 1 && flagval2==0) { flagval2=1; flagval1=0; }
CrossDown[i] = High[i] + Range*0.75;
}
}

if (flagval1==1 && CurTime() > GlobalVariableGet("AlertTime"+Symbol()+Period()) && GlobalVariableGet("SignalType"+Symbol()+Period())!=OP_BUY)
{
// if (GlobalVariableGet("LastAlert"+Symbol()+Period()) < 0.5)
// {
if (SoundON) Alert("BUY signal at Ask=",Ask,"\n Bid=",Bid,"\n Time=",TimeToStr(CurTime(),TIME_DATE)," ",TimeHour(CurTime()),":",TimeMinute(CurTime()),"\n Symbol=",Symbol()," Period=",Period());
if (EmailON) SendMail("BUY signal alert","BUY signal at Ask="+DoubleToStr(Ask,4)+", Bid="+DoubleToStr(Bid,4)+", Date="+TimeToStr(CurTime(),TIME_DATE)+" "+TimeHour(CurTime())+":"+TimeMinute(CurTime())+" Symbol="+Symbol()+" Period="+Period());
// }
tmp = CurTime() + (Period()-MathMod(Minute(),Period()))*60;
GlobalVariableSet("AlertTime"+Symbol()+Period(),tmp);
GlobalVariableSet("SignalType"+Symbol()+Period(),OP_SELL);
// GlobalVariableSet("LastAlert"+Symbol()+Period(),1);
}

if (flagval2==1 && CurTime() > GlobalVariableGet("AlertTime"+Symbol()+Period()) && GlobalVariableGet("SignalType"+Symbol()+Period())!=OP_SELL) {
// if (GlobalVariableGet("LastAlert"+Symbol()+Period()) > -0.5)
// {
if (SoundON) Alert("SELL signal at Ask=",Ask,"\n Bid=",Bid,"\n Date=",TimeToStr(CurTime(),TIME_DATE)," ",TimeHour(CurTime()),":",TimeMinute(CurTime()),"\n Symbol=",Symbol()," Period=",Period());
if (EmailON) SendMail("SELL signal alert","SELL signal at Ask="+DoubleToStr(Ask,4)+", Bid="+DoubleToStr(Bid,4)+", Date="+TimeToStr(CurTime(),TIME_DATE)+" "+TimeHour(CurTime())+":"+TimeMinute(CurTime())+" Symbol="+Symbol()+" Period="+Period());
// }
tmp = CurTime() + (Period()-MathMod(Minute(),Period()))*60;
GlobalVariableSet("AlertTime"+Symbol()+Period(),tmp);
GlobalVariableSet("SignalType"+Symbol()+Period(),OP_BUY);
// GlobalVariableSet("LastAlert"+Symbol()+Period(),-1);
}
return(0);
}

I have a free version you can use https://www.mql5.com/en/market/product/86296

There's no bug in the code, it compile without errors


It works fine for me in backtest



But as many other retail EA's they are not very profitable, just sayin (after testing 60+ EA's over the past 15 years )

Attached Image (click to enlarge)

@jeanlouie - Wow what a nice indicator you have there, have seen many, but this is the best - requires very good coding skills to do this.

I wish i could code like this

Looks nice on my 49" widescreen




Dark mode

I hope someone here can help with this issue, I am trying to load more data from this spreadsheet into my mt4 platform but nothing happens after trying to import through the history center.
I am not sure what the issue is but I have tried everything I could find by researching the internet.
I downloaded the spreadsheet through this link and csv tab at the bottom of the chart:
https://stooq.com/q/a2/?s=gbpusd&i=w...&lt=57&r=0&o=0