I will code your EAs and Indicators for no charge

Quoting Eod

Disliked

{quote} thanks again for your answers. but that's not what I need. I need an indicator that divides the prices of two currency pairs of your choice. What if we used the close at 1 minute to create the graph resulting from the ratio I mentioned earlier?

Ignored

Quoting njatha

Disliked

Hello. I have this indicator that plots arrows on the chart. Sometimes it gives multiple arrows(like 10 or more) on a single bar. If someone can help me to reduce the number of arrows on each bar through skipping. i.e. if the indicator was to give 10 arrows on a certain bar i need it changed so it can output the 1st, 3rd and 9th arrows. So when am using an ea, it takes 3 or 4 trades instead of 10 trades. {file}

Ignored

Quoting njatha

Disliked

{quote} You can use this instead: //compile// //+------------------------------------------------------------------+ //| CandleSizeAlert.mq4 | //| Copyright � 2008, Robert Hill | //| | //| Will send alert when a candle meets the size criteria entered | //+------------------------------------------------------------------+ #property copyright "Copyright � 2006, Robert Hill" #property indicator_chart_window #property indicator_buffers 2 #property indicator_color1 LawnGreen #property indicator_color2 Red #property indicator_width1 2 #property...

Ignored

Quoting BestTraderEv

Disliked

{quote} How are you using this with your EA? You are using signals from the current candle? If so, the problem is not the indicator, but your EA. You must define in the EA how many positions max per signal the EA can open. The indicator does not know how the current candle will close, so if you input some size that you want to look for, the current candle can have this size many times, and in both directions. I have never understood why people want to trade current candle signals??? Your EA most probably is reading the buffers of this indicator,...

Ignored

Quoting BestTraderEv

Disliked

{quote} Diciamo che l'offerta M1 era 108,5 per CADJPY e 1,09500 per AUDNZD: cosa otterremo? 99.08676 Dove devo tracciare quel valore? 1.09500 / 108.5 = 0.01009 Dove devo tracciare quel valore? Vuoi creare un grafico completamente nuovo e indipendente?

Ignored

Quoting njatha

Disliked

{quote} Alright, here's the EA that am using: https://www.forexfactory.com/thread/...0#post14153560. Can it be modified to skip some trades? {file}

Ignored

Quoting Eod

Disliked

{quote} In forex if you divide EURUSD by GBPUSD you get the price of EURGBP. dividing the prices of the first two I have to get the eurgbp chart. In forex it is not very useful, but it is very useful if I compare Usa500 with Ger40 (cfd). ok? With the result of the fraction I have to create a graph, possibly not under the main graph but on the main graph yes I want to create a totally new, independent chart

Ignored

Quoting BestTraderEv

Disliked

{quote} Anything can be modified, but I need to understand what it is doing, first. And I can't understand strange symbols that are not of any language. Plus over 3500 lines of code... I can't read this: {image}

Ignored

Quoting njatha

Disliked

{quote} It is as is from the site I downloaded it from(https://www.mql5.com/en/code/7632). The EA takes trades from any indicator that draws arrows on the chart. The author has modulated the code in a very understandable manner. This one should work directly with the candle i had posted earlier: {file}

Ignored

Quoting Eod

Disliked

...RATIO between the BID PRICE of 2 different currency...drawn in the graph window and not below...

Ignored

Quoting BestTraderEv

Disliked

{quote} I can see in the description, link that you provided, this: MaxOrdersCount - allowed total number of the opened orders. -1 - not limited. MaxBuyCount - allowed number of opened buy orders. -1 - not limited. MaxSellCount - allowed number of opened sell orders. -1 - not limited. So you should be able to set this to take only as many orders as you want. Also, try to set: iBuyBufIndex - index of the buffer with the buy arrows. iSellBufIndex - index of the buffer with the sell arrows. Sorry, they are the indexes of the buffres, so yes, yours...

Ignored

     for(int i=0; i<limit; i++)
       {
        ExtMapBuffer1[i]=50.14348112 * MathPow(iClose("EURUSD",0,i),-0.576) * MathPow(iClose("USDJPY",0,i),0.136) * MathPow(iClose("GBPUSD",0,i),-0.119) * MathPow(iClose("USDCAD",0,i),0.091) * MathPow(iClose("USDSEK",0,i),0.042) * MathPow(iClose("USDCHF",0,i),0.036);
       }
     for(i=0; i<limit; i++)
       {
        ExtMapBuffer2[i]=0;
        for(int z=0; z<limit; z++)
          {       
           ExtMapBuffer2[z]=iBandsOnArray(ExtMapBuffer1,0,20,2,0,MODE_MAIN,z);
          }
       }

Quoting PatienceFx

Disliked

{quote} check inbox please do not laugh at the simplicity

Ignored

Quoting njatha

Disliked

{quote} I have already addressed all that. In order for my strategy to work, shift=0 is a must. Also setting the MaxOrderCount is not going to work. What I want to achieve is a way for open orders in a skipping manner. For example if the indicator sends a buy signal and it opened, the next three buy signals that the indicator sends are not are not executed by EA. It should only open a trade fifth signal(1,5,9,13....) in that manner and that where am stuck. The way I see it , it can be achieved through the EA or indicator. That why i was suggesting...

Ignored

      
      Bull[i] = 0;
      Bear[i] = 0;
      if (myDif > CandleSize)
      {
        if (myOpen > myClose  )
        {
         if (i == 0 && flagval1==0)
         {
           flagval1=1;
           flagval2=0;
           tc = TimeCurrent();
           if (SoundOn) PlaySound(SoundFile);
           if (AlertON) Alert("Large BEAR candle","\n Time=",TimeToStr(tc,TIME_DATE)," ",TimeHour(tc),":",TimeMinute(tc),"\n Symbol=",Symbol()," Period=",Period());
         }
         Bear[i] = High[i] + Range*0.75;
         if(Bear[0]>0&&Bear[0]!=EMPTY_VALUE)
         Print("BEAR signal");
        }
        else
        if (myOpen < myClose   )
        {
         if (i == 0 && flagval2==0)
         {
          flagval2=1;
          flagval1=0;
          tc = TimeCurrent();
          if (SoundOn) PlaySound(SoundFile);
          if (AlertON) Alert("Large Bull candle","\n Date=",TimeToStr(tc,TIME_DATE)," ",TimeHour(tc),":",TimeMinute(tc),"\n Symbol=",Symbol()," Period=",Period());
         }
         Bull[i] = Low[i] - Range*0.75;
         if(Bull[0]>0&&Bull[0]!=EMPTY_VALUE)
         Print("BULL signal");
        }
      }

Quoting PatienceFx

Disliked

kindly suggest a working indicator using this concept for(int i=0; i<limit; i++) { ExtMapBuffer1[i]=50.14348112 * MathPow(iClose("EURUSD",0,i),-0.576) * MathPow(iClose("USDJPY",0,i),0.136) * MathPow(iClose("GBPUSD",0,i),-0.119) * MathPow(iClose("USDCAD",0,i),0.091) * MathPow(iClose("USDSEK",0,i),0.042) * MathPow(iClose("USDCHF",0,i),0.036); } for(i=0; i<limit; i++) { ExtMapBuffer2[i]=0; for(int z=0; z<limit; z++) { ExtMapBuffer2[z]=iBandsOnArray(ExtMapBuffer1,0,20,2,0,MODE_MAIN,z); } }

Ignored

Quoting PatienceFx

Disliked

kindly suggest a working indicator using this concept for(int i=0; i<limit; i++) { ExtMapBuffer1[i]=50.14348112 * MathPow(iClose("EURUSD",0,i),-0.576) * MathPow(iClose("USDJPY",0,i),0.136) * MathPow(iClose("GBPUSD",0,i),-0.119) * MathPow(iClose("USDCAD",0,i),0.091) * MathPow(iClose("USDSEK",0,i),0.042) * MathPow(iClose("USDCHF",0,i),0.036); } for(i=0; i<limit; i++) { ExtMapBuffer2[i]=0; for(int z=0; z<limit; z++) { ExtMapBuffer2[z]=iBandsOnArray(ExtMapBuffer1,0,20,2,0,MODE_MAIN,z); } }

Ignored