I will code your EAs and Indicators for no charge

Quoting walesamuel

Disliked

{quote} HI BlueRain, the ema now trails be chart candle timeframe. This option is perfect, thanks for this. I observed that the breakeven which was set to 50 and to lock 10pips was not performing well. If you could have a look at the breakeven function at your time. Thanks

Ignored

Quoting FundedCoffee

Disliked

{quote} IF ATR used, example: ATR period 6,has 16Pips. multiplactor 1: 1X ATR -> 16Pips multiplactor 2: 2X ATR -> 32Pips multiplactor 3: 3X ATR -> 48Pips Now show this Targets on the Charts, BUT preferably as % instead of Pips if EMA used, example EMA period 6 HIGH ->Price1 11399 EMA period 6 LOW -> Price2 11391 formula ((price_1 - price_2) / price_2) * 100 for distance in % = 0.07% multiplactor 1: 1X distance -> 0.07 % multiplactor 2: 2X distance -> 0.14 % multiplactor 3: 3X distance -> 0,28 % Now show this Targets on the Charts

Ignored

Quoting eess

Disliked

{quote} Your ATR example, what's the formula to display in %? example: ATR period 6,has 16Pips. % = 16/x * 100% What is the x?

Ignored

Quoting FundedCoffee

Disliked

{quote} Comment("current range is : "+DoubleToStr((100.0*(iHigh(NULL,TimeFrame,0)-iLow(NULL,TimeFrame,0))-100*-1)/1000/iATR(NULL,TimeFrame,AtrPeriod,0),2)+" %"); something that I have "coded" which gives me at least similar results as the 6EMA channel. I wouldnt know though how to put dynamic levels based on this on my charts. the formula is just clumisily put together so it shows what I want. dont laugh. Maybe its even completely wrong. I dont know how to code.

Ignored

Quoting jega2007

Disliked

{quote} hi BLUE RAIN Thanks for your support i want to add alert with 2 options 1,When rsi crosses above 55 current candle(C0) in all timeframe then send BUY EURUSD When rsi crosses below 45 current candle(C0) in all timeframe then send SELL EURUSD 2 When rsi crosses above 55 C2,C1.C0 in all timeframe then send STRONG BUY EURUSD When rsi crosses below 45 C2,C1.C0 in all timeframe then send STRONG SELL EURUSD please add in input Alert for C0....TRUE/FALSE Alert for C2,C1.C0.... .TRUE/FALSE THANKS

Ignored

Quoting sathishkbala

Disliked

Hi fellow coders, I coded a simple strategy for scalping, the code itself only runs for 68 rows. on compiling, I dont get any errors though. unfortunately, in strategy tester, the EA doesnt take any trade. In demo account (RawSpread Account) to test the EA for errors, it doesnt place trade either and i end up getting an error in Journal entry as in the image, which says Invalid S/L & T/P. Interestingly for a buy trade, the EA is calculating a higher SL than TP, the exact inverse of the intended code. Can anyone, help me identify the mistake i have...

Ignored

Quoting MrJoker

Disliked

Hi, I am looking for a script / EA that will allow me to open multiple pending orders at the selected price which will include TP and SL. I found these two on the forum that fit my criteria. The only problem is that they only open 1 order and I would like them to open the amount of my choice. Thank you in advance for your help. {file} {file}

Ignored

Quoting eess

Disliked

{quote} Sorry, I don't really have time for the rest of the week to do any more coding, so this is all I manage to code...Maybe it is useful for you, but I don't get your formula for display in %, so I just display in price instead. If it's not what you want, maybe somebody else can code for you instead. So what is shown is: 1) UpperLine1 = Close + ATR*Multiplier1 2) UpperLine2 = Close + ATR*Multiplier2 3) UpperLine3 = Close + ATR*Multiplier3 4) LowerLine1 = Close - ATR*Multiplier1 5) LowerLine2 = Close - ATR*Multiplier2 6) LowerLine3 = Close -...

Ignored

Quoting OAPDave

Disliked

{quote} Try this one The Colors seem the better way round ? {file} {file}

Ignored

Quoting Erebus

Disliked

{quote} The method is somewhat counter-intuitive and so are the colors. The way I understood the explanation is, for an uptrend, long entry, look for a candle where the sellers pushed the price back down more than 45% from the high. The theory is, that once the price gets above that level, the sellers have lost the battle, and there can be explosive moves from there. In this example, circled, there are consecutive signals for long trades, but the arrows point down and are red. Do you agree that this is the "correct" display of the signal and color?...

Ignored

Quoting BlueRain

Disliked

{quote} Nothing wrong except your OrderType was wrong. Change {res=OrderSend(Symbol(),OP_BUY,Lots,Bid,3,Bid+sl,Bid-tp,"EMA_21_HLC_Scalp_Sell",MAGICMA,0,Red);} to {res=OrderSend(Symbol(),OP_SELL,Lots,Bid,3,Bid + sl, Bid - tp,"EMA_21_HLC_Scalp_Sell",MAGICMA,0,Red);} FYI, You will need to add handling of stoplevel.

Ignored

Quoting Erebus

Disliked

{quote} Apparently, Rob Hoffman and his Inventory Retracement Bar (IRB) have been around since 2017, yet there are very few mentions of them here on FF. I took the work of cja and made those into arrows; I'm no coder but can do cosmetic alterations, eg. colors, wingdings There is a good video on Youtube where Rob Hoffman explains the method, he does say, trades can be taken by either signal in the trend direction Let's look at the 4-Hour chart of the GBPNZD pair for last week, a notoriously difficult pair but great reward with right entry with trend....

Ignored

Quoting ntk

Disliked

{quote} why the last trade far right is a sell? I would thought price has been depressed over 45%, when price recovered and get over that level means sellers have been defeated, so it should be a buy, not a sell there {image}

Ignored

Quoting sathishkbala

Disliked

{quote} @BlueRain, many thnx mate.. how I missed such a trivial mistake.. ha ha ha.. highly appreciate the support... by the way, what is this Stop-Level Handling.?

Ignored

Quoting Erebus

Disliked

{quote} The point I was making with that post was, that in a Youtube video I had seen that trades could be taken from either signal. But specifically, if you do mean the far-right signal, the last red, down arrow, below the MA, then it is the buyers that drove the price back up over 45% And then, when that level is broken, then it is the buyers that have been defeated Let's update the chart, it's a pretty dodgy pair but the price is still below the 20 EMA and more sell signals than buy Hope that answers your question {image}

Ignored

Quoting OAPDave

Disliked

{quote} The way I am playing it ? ps I think the bar indicated is a good reference bar But it just has to be in a decent trend and that is the real question, identifying the trend , the guy says use a 45angle yes sounds good but what time frame are you working on If small time frames what is your R/R or pip expectations per trade etc etc Move up time frames you get bigger risk bigger rewards if you get into a strong trend So I think the bar is very good but does need a little help finding it in the right place for the best results one trick might...

Ignored

//+------------------------------------------------------------------+
//|                                          List Object Details.mq4 |
//+------------------------------------------------------------------+
//#include <hanover --- function header (np).mqh>
#property show_inputs
 //#include <hanover --- function header.mqh>
extern string ObjectTypesToList = "Label";
string ObjectTypes = "Label";
string OT[1];
//+------------------------------------------------------------------+
int start()  {
//+------------------------------------------------------------------+
  StrToStringArray(ObjectTypes,OT);
  for (int i=0; i<24; i++)  {
    if (StringFind(StringTrim(StringLower(ObjectTypesToList)),StringTrim(StringLower(OT[i]))) < 0)
      OT[i] = " ";
  }
 
  string fname = "Object List---" + ExpandCcy(Symbol()) + "," + TFToStr(Period()) +".csv";
  int h = FileOpen(fname,FILE_CSV|FILE_WRITE,'~');
  string outstr = "Description";
  FileWrite(h,outstr);              
  for (i=0; i<ObjectsTotal(); i++)   {
    string objname = ObjectName(i);
    int    type    = ObjectType(objname);
    if (OT[type] != " ")   {
      outstr = NumberToStr(i,"T5")
            // + StrToStr(objname,"','T30")
            // + StrToStr(OT[type],"','T30")
             + StrToStr(ObjectDescription(objname),"',\x22'T64'\x22'")
             //+ DateToStr(ObjectGet(objname,OBJPROP_TIME1),"','BY.M.D H:I")
             //+ NumberToStr(ObjectGet(objname,OBJPROP_PRICE1),"','TBR-3.5")
             //+ DateToStr(ObjectGet(objname,OBJPROP_TIME2),"','BY.M.D H:I")
             //+ NumberToStr(ObjectGet(objname,OBJPROP_PRICE2),"','TBR-3.5")
             //+ "," + ColorToStr(ObjectGet(objname,OBJPROP_COLOR))
            // + NumberToStr(ObjectGet(objname,OBJPROP_STYLE),"','T2")
            // + NumberToStr(ObjectGet(objname,OBJPROP_WIDTH),"','T2")
            // + "," + BoolToStr(ObjectGet(objname,OBJPROP_BACK))
            // + "," + BoolToStr(ObjectGet(objname,OBJPROP_RAY))
            // + NumberToStr(ObjectGet(objname,OBJPROP_ARROWCODE),"','TB6")
            // + NumberToStr(ObjectGet(objname,OBJPROP_CORNER),"','T1")
            // + NumberToStr(ObjectGet(objname,OBJPROP_XDISTANCE),"','TB6")
             //+ NumberToStr(ObjectGet(objname,OBJPROP_YDISTANCE),"','TB6");
      FileWrite(h,outstr);              
  } }
  FileClose(h);
  MessageBox("All done!");
  return(0);
}
//+------------------------------------------------------------------+
//#include <hanover --- extensible functions.mqh>
//#include <hanover --- extensible functions (np).mqh>