I will code your EAs and Indicators for no charge | Page 2054 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #41,061
  • Nov 6, 2020 6:55am Nov 6, 2020 6:55am
@ Bluerain

Could you possibly assist me, EA below will execute a trade at a time set by the trader, very useful with Time and Price forecast trading. It works well on all trades I have set but the only time it does not open a trade is when I set it to 23:59.

Could you check why or am I doing something stupid

My broker is GMT +2

Attached File(s)
File Type: mq4 OpenTradeAtTime.mq4   3 KB | 463 downloads
Trade Without Fear
  • #41,062
  • Nov 6, 2020 8:14am Nov 6, 2020 8:14am
Quoting T4Trade
please can someone code this Ea for me,thanks Every time price touch the buy or sell lines,it places a pending order depending on size(lots)chosen,plz see the figure,thanks Requirements: time to activate the EA and stop taking more trades starting lot size multiplication every time it touches the levels how many levels or layers should be taken spread sl and tp is build in or option in a setting(normally it is preset 30tp,30 sl) {image}

there is a famous system as you requires

find it > https://www.forexfactory.com/thread/...y-stevehopwood

Regards
Margin Call again and again...
  • #41,063
  • Nov 6, 2020 9:10am Nov 6, 2020 9:10am
Quoting mntiwana
{quote} "UniWilder'sDMI_v3.3 600+" Here you go This extremely extended ver coded by "Igor" thanks to Igor for adding such pretty and unique features in upper example pic the lowest sw as default parameters initial methods choice initial prices choice smoothing option levels arrowing package alerting package mtf and a lot of rest of features experimenting recommended {image}{image}{image}{image} {file}
So grateful sir well i tried to create it just like in the screenshot but it seems i did not get it right especially the accuracy of the arrows in th settings the arrow settings is o so when i load the chart the arrows failed to display then i changed the settings to 1 and the arrows showed but they are scattered then i observed in the picture theres a stoch setting which is not inclusive .Pls if you can make me a template i will be appreciative.Thanks
Attached Image (click to enlarge)
Click to Enlarge Name: MNTIWANA.1.PNG Size: 79 KB
Attached Image (click to enlarge)
Click to Enlarge Name: MNTIWANA.2PNG.PNG Size: 93 KB
Attached Image (click to enlarge)
Click to Enlarge Name: MNTIWANA.PNG Size: 109 KB
  • #41,064
  • Nov 6, 2020 9:15am Nov 6, 2020 9:15am
Does anybody know of an EA that does a buy and a sell at the start and the end of a candle?
  • #41,065
  • Nov 6, 2020 9:22am Nov 6, 2020 9:22am
Quoting kofix11
Does anybody know of an EA that does a buy and a sell at the start and the end of a candle?
On which time frame of the candle/bar -
  • #41,066
  • Nov 6, 2020 9:26am Nov 6, 2020 9:26am
Quoting Slingshots1
{quote} So grateful sir well i tried to create it just like in the screenshot but it seems i did not get it right especially the accuracy of the arrows in th settings the arrow settings is o so when i load the chart the arrows failed to display then i changed the settings to 1 and the arrows showed but they are scattered then i observed in the picture theres a stoch setting which is not inclusive .Pls if you can make me a template i will be appreciative.Thanks{image}{image}{image}
ArrowsMode: 0-off,1-on
  • #41,067
  • Nov 6, 2020 9:29am Nov 6, 2020 9:29am
Quoting mntiwana
{quote} On which time frame of the candle/bar -
4h or daily
  • #41,068
  • Nov 6, 2020 10:44am Nov 6, 2020 10:44am
Hello to all coders here

Anyone could add a buffer to show the last status ( direction ) of the semaphore with option current bar and closed bar ? Let say appear ZZ 3 to go UP, if option current bar is selected this buffer will shows +3 , if closed bar selected it will still showing the last direction of the last ZZ ( could be any like -3, -2, -1 )

Thanks in advance
Attached File(s)
File Type: mq4 3Level_ZZSemafor.mq4   16 KB | 450 downloads
  • #41,069
  • Nov 6, 2020 11:45am Nov 6, 2020 11:45am
What do you want to do ?
New mailCopy

Hi everyone, I need some help with this simple code:
I would like at 8:50 (Input Time_Go) to take the closing of the candle to be inserted in r2 and s2 (line code 122 123) to pull 2 horizontal lines, but the time taken by the code and the closing are not correct.
Thanks
Attached File(s)
File Type: mq4 Line Mix.mq4   11 KB | 405 downloads
  • #41,070
  • Nov 6, 2020 12:07pm Nov 6, 2020 12:07pm
Hi BlueRain

nice idea
please add x/y settings. By right corners button outlap of the chart

Attached Image



Quoting BlueRain
{quote} Try this one... just quick code - recycling of some other stuffs from internet resources I found. Tested and it looks like working fine with me. I made script name and button label as optional. You can type in your script name and/or change button strings ( customizable ). if your script is under subfolder, use double \\ as subfolder. example: scriptname = "test\\close.mq4" Note: Called Script shouldn't have below line or it should be commented out if it is in the script, it will ask your input & confirmation causing no immediate execution....
  • #41,071
  • Nov 6, 2020 3:33pm Nov 6, 2020 3:33pm
Quoting jimsxxl
Hello guys.... ive tried to code this myself but without success. I wonder if anyone could help me please! I want to add a High/Mid/Low line to this i-Session indicator (the Mid-line is not that important tho). I also would like a sound/push alert when price touches the High or Low-line Im attaching a screenshot of what i mean. I will be very greatful if anybody could help me code this, or point me in the right direction to make this work! Thank you in advance! {image} {file}

im no coder but you may find this useful


i liked - however i wished for there to be option of the high and low being taken from m30 candel close high low and h1 candel close high low

good luck
Attached File(s)
File Type: mq4 Box Fibo extra load.mq4   5 KB | 574 downloads
  • #41,072
  • Nov 6, 2020 5:13pm Nov 6, 2020 5:13pm
Hello Great Coder's in the house, please help to make this indicator to alert on current candle, immediately the arrows show up because it presently alerts after candle close.
Thanks in advance.
Attached File(s)
File Type: mq4 EATA _Alert2.mq4   15 KB | 514 downloads
  • #41,073
  • Nov 6, 2020 9:05pm Nov 6, 2020 9:05pm
Can someone code indicator for me ?
If interested contact me direct and I will explain
Thank you
  • #41,074
  • Nov 6, 2020 9:48pm Nov 6, 2020 9:48pm
Quoting jeanlouie
Requested; Time Range Breakout wBuffers - boxes price in a time range - tracks breakout from this range - to be used as guide only - has signal buffers, buy/sell, 0/1 - can restrict to buy or sell only {file}
HI Jeanlouie,

An excellent simple tool for collecting statistics!

May I request you to add a few modifications so that statistics relating to trading Top and Bottom of the Time Range is used to collect statistics on frequencies of profitable and losing trades.

1. If it is not complicated kindly use the ticks of current last deal and volume for the current Last Price.

Structure:
The Structure for Returning Current Prices (MqlTick)
This is a structure for storing the latest prices of the symbol. It is designed for fast retrieval of the most requested information about current prices.
struct MqlTick
{
datetime time; // Time of the last prices update
double bid; // Current Bid price
double ask; // Current Ask price
double last; // Price of the last deal (Last)
ulong volume; // Volume for the current Last price
};

2. Provide additional facility for the zone range measurement to Pips so that trades with a TP or SL of 3 pips can also be used for capturing the frequencies of trades in smallest TF of even 5m and 1m. Existing 0.0 is good for measuring risk but is not useful for recording frequency of winning or losing trades.

3. The beauty of your tool is its simplicity. It is not necessary to have any facility to link with any strategy mechanism or show entries generated by any strategy. This tool is not intended for trading. It is only for backtesting and forward testing purposes.

Strategy should be mapped in terms of Pips or Minutes only or Purely price levels. No need to get any output from any indicator for entering trades..
Strictly Manual inputs be applied.

Example: If I want to use Support and Resistance as strategy, I will use the indicator to print lines on the chart and use the price levels, pip height or Time bars (minutes) to input manually.

4. To facilitate buying and selling from top or bottom, please add a logic to use Two Anchor Candles values defining Top and Bottom of the zone as against just one zone.

Unit of inputs will be Pips distance (delay or gap), Minutes distance (delay or gap), or Price Level ,

Modes of trading:

(a) Sell from top or Buy from top (any one) Manual selection with 3 input choice of Pips, Minutes, Price level (any one)
Possibly qualified by whether to enter next xxxx (number of entries) in a row.

(b) Buy from Bottom or Sell from top (any one) Manual Selection with 3 input choice of Pips, Minutes, Price level (any one)
Possibly qualified by whether to enter next xxxx (number of entries) in a row.

Trading in a row should not involve any change of lots or volume from

Thank you for your generosity in sharing a simple but essential tool.
Practice makes a person perfect
  • #41,075
  • Nov 6, 2020 9:58pm Nov 6, 2020 9:58pm
HI can i have your whatsapp or telegram cuz i wan to learn wif u how to code
  • #41,076
  • Nov 6, 2020 11:58pm Nov 6, 2020 11:58pm
Quoting Badguy
Hi BlueRain nice idea please add x/y settings. By right corners button outlap of the chart {image} {quote}
it has already X,Y settings.
You can use below option to adjust position and size of button

btn_x
btn_y
btn_width
btn_height
  • #41,077
  • Nov 7, 2020 2:38am Nov 7, 2020 2:38am
Quoting mntiwana
{quote} ArrowsMode: 0-off,1-on
Attached Image (click to enlarge)
Click to Enlarge Name: f131e09b5f3049a57e9d5091f11832bb.png Size: 181 KB
  • #41,078
  • Nov 7, 2020 3:34am Nov 7, 2020 3:34am
[alıntı = cja; 13237283] {alıntı} {dosya} {dosya} [/ alıntı]
Except for the trade that is in the best position, would you make an ea that closes the others on average including commission?
I'm using a translator, I hope it's understood
  • #41,079
  • Nov 7, 2020 4:55am Nov 7, 2020 4:55am
Hello,

is it possible to adjust the informations of this indicator on my sreen ?

I can't see anything, probably due to my microsoft surface little screen

thanks a lot,

Attached Image (click to enlarge)
Click to Enlarge Name: EURUSDH1.png Size: 147 KB
Attached File(s)
File Type: mq4 TradeReport_compact - updated Russia.mq4   66 KB | 596 downloads
Bottomless wonders spring from simple rules, which are repeated without end
  • #41,080
  • Nov 7, 2020 5:09am Nov 7, 2020 5:09am
Quoting limprobable
Hello, is it possible to adjust the informations of this indicator on my sreen ? I can't see anything, probably due to my microsoft surface little screen thanks a lot, {image}{file}
Try using "x y" for to adjust as you required
140 traders viewing now