I will code your EAs and Indicators for no charge | Page 1874 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #37,461
  • Jul 11, 2020 9:07pm Jul 11, 2020 9:07pm
Quoting de5151
{quote} Make one template and put this attached indicator in the corner so you can switch between pairs with the same template. Now make another template and do the same. Now make another template and do the same...etc. I think you can have up to 100 open templates in mt4. If you want 28 pairs in one window -- that is a different matter. {image} {file}

Thanks de5151.

Not perfectly what I mean but ok....can we have the same indi you post with button but, instead of change pairs, can change template?

Thanks in advance
  • #37,462
  • Jul 11, 2020 9:50pm Jul 11, 2020 9:50pm
Quoting howa61
{quote} Thanks de5151. Not perfectly what I mean but ok....can we have the same indi you post with button but, instead of change pairs, can change template? Thanks in advance
This is not necessary as every new pair open at the bottom of mt4 should be a different template.

Attached Image (click to enlarge)
Click to Enlarge Name: mt4-pic.png Size: 8 KB


As you can see in my mt4 pic above, I have 13 charts open. Each one is a different template with my previous indi on it so I can use that chart template for every pair that I trade. So I am using 13 different templates here.
  • #37,463
  • Jul 11, 2020 10:24pm Jul 11, 2020 10:24pm
Quoting Maijin
{quote} Why don't you search the forum for reports about an indicator or EA before you post the probably most useless indicator as EA or MDF ? Nearly every week exactly this indicator is requested as ea or mdf version. the answers are so clear that the question does not even arise. The answers are so many that I do not want to post them here again. Please use the search function. Very understandable answers gives "mntiwana" about it. Many thanks at this point for his very helpful posts.
Apparently, there is both a repainting version and non-repainting version of the indicator. The one I am referring to is the non-repainting one.
Learn from your mistakes and march on.
  • #37,464
  • Jul 11, 2020 10:51pm Jul 11, 2020 10:51pm
hi Programmers ...! (sorry for my English)
i have an idea for coding EA.
my requirements are bellow

1. Daily High impact news alert.
2. daily Max Loss limit in Percentage.
3. Daily Profit Target.
4. One click Close all trades.
5. Symbols Changer
6. trading Sessions info.
7. Every of above points will choose-able. i mean if someone want to do changes in options then he can.
Thanks in advance
  • #37,465
  • Jul 11, 2020 11:06pm Jul 11, 2020 11:06pm
BlueRain

BLUERAIN SIR
CAN YOU PLZ MODIFY THIS GOOD INDICATOR

I WANT AN ARROW/ALERT WHENEVER VOLUME TURNS BLUE OR RED
OPTION TO HAVE MULTI TIMEFRAME OPTION (VOLUME WINDOW)
OPTION TO HIDE THE VOLUME WINDOW
Attached Image (click to enlarge)
Click to Enlarge Name: BANKNIFTYM5.png Size: 59 KB
Attached File(s)
File Type: mq4 VOLUME.mq4   5 KB | 600 downloads
  • #37,466
  • Edited 11:50pm Jul 11, 2020 11:38pm | Edited 11:50pm
Quoting here2there
{quote} Apparently, there is both a repainting version and non-repainting version of the indicator. The one I am referring to is the non-repainting one.
This is a very simple way of deciding this discussion.

1/ Load the indicator into the Meta Editor and compile it - leave the Editor open
2/ Take the non-repainting indicator and put it on a M5 on the strategy tester.
3/ Run the tester so you get a complete new chart on the tester.
4/ Mark the turns with a vertical line.
5/ Compile the indicator in your Meta Editor.

You decide if it repaints or not.

Chart as it looks when run on the tester
Attached Image (click to enlarge)
Click to Enlarge Name: solar.png Size: 64 KB


Chart as it looks after re-compiling the indicator ( which effectively is what happens if you change timeframes or 1st load the indicator on a chart )
Attached Image (click to enlarge)
Click to Enlarge Name: solar1.png Size: 67 KB
Trade what you see not what you hope
  • #37,467
  • Edited 4:28am Jul 12, 2020 1:05am | Edited 4:28am
https://www.forexfactory.com/showthr...1#post13052261

mr blue rain plz fix the problems in ea above or down anothor solution choose what you see easy for you
i try hard to make it easy . this ea close all opening&pending on the chart
edit it to manage only opening trades
give me four options
1- close all opening buy
2- close all opening sell
3- close all opening buy&sell
4- close some opening by ticket numbers filter
thats all what i want . thanks your help
Attached File(s)
File Type: mq4 close all at price.mq4   3 KB | 410 downloads
  • #37,468
  • Jul 12, 2020 1:41am Jul 12, 2020 1:41am
Quoting redfan
{quote} see post 37317 solar wind.
Sir mq4 file will work in mt4? Or it mist be in ex4 formate
  • #37,469
  • Jul 12, 2020 2:03am Jul 12, 2020 2:03am
These EAs
Attached File(s)
File Type: mq4 MPTM BOMB HEDGE ALL 0810.mq4   97 KB | 536 downloads
Attached File(s)
File Type: mq4 Multi purpose trade manager.mq4   106 KB | 528 downloads
showing 3 errors during compilation. Update required for new build.
  • #37,470
  • Jul 12, 2020 2:08am Jul 12, 2020 2:08am
Quoting cja
{quote} This is a very simple way of deciding this discussion. 1/ Load the indicator into the Meta Editor and compile it - leave the Editor open 2/ Take the non-repainting indicator and put it on a M5 on the strategy tester. 3/ Run the tester so you get a complete new chart on the tester. 4/ Mark the turns with a vertical line. 5/ Compile the indicator in your Meta Editor. You decide if it repaints or not. Chart as it looks when run on the tester {image} Chart as it looks after re-compiling the indicator...
Thanks for the work. I just didn't feel like showing it again and again....
  • #37,471
  • Jul 12, 2020 2:59am Jul 12, 2020 2:59am
Can anyone help me with this indicator please. I want the lines shown to be full horizontal lines rather than short trendlines?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 171 KB
Attached File(s)
File Type: ex4 common_sr.ex4   30 KB | 442 downloads
File Type: mq4 common_sr.mq4   38 KB | 514 downloads
  • #37,472
  • Jul 12, 2020 3:52am Jul 12, 2020 3:52am
Quoting saslam
These EAs{file}{file} showing 3 errors during compilation. Update required for new build.
simple syntax errors - fixed
Attached File(s)
File Type: mq4 Multi purpose trade manager.mq4   211 KB | 483 downloads
File Type: mq4 MPTM BOMB HEDGE ALL 0810.mq4   195 KB | 544 downloads
  • #37,473
  • Edited 5:29am Jul 12, 2020 5:02am | Edited 5:29am
Quoting saslam
These EAs{file}{file} showing 3 errors during compilation. Update required for new build.
MPTM BOMB HEDGE ALL 0810
it contains some 3 errors and 49 warnings
removed some 21 warnings too - though still 28 warnings there

Multi purpose trade manager
same for this too
Attached Image (click to enlarge)
Click to Enlarge Name: 3 errors 49 warnings.png Size: 131 KB
Attached File(s)
File Type: mq4 MPTM BOMB HEDGE ALL 0810.mq4   195 KB | 486 downloads
File Type: mq4 Multi purpose trade manager.mq4   212 KB | 464 downloads
  • #37,474
  • Jul 12, 2020 5:09am Jul 12, 2020 5:09am
Quoting BlueRain
{quote} simple syntax errors - fixed {file} {file}
Hello BlueRain i need 3simple horizontal lines to work with MACD signal line 9 on 5minutes to H1 chart just to mark short take profit entry and stop loss the screenshot displayed the idea the moving average for macd signal line 9 on main chart works with the one in the subwindow stop loss on top of the candle that clearly close below the moving average next formed candle is the entry after closing take profit could be 15pips.Thanks
Attached Image (click to enlarge)
Click to Enlarge Name: BLUE RAIN RAIN.PNG Size: 38 KB
  • #37,475
  • Jul 12, 2020 6:15am Jul 12, 2020 6:15am
Quoting japfx
Dear master , Please modify this indicator to only the high or low as applicable and not add OHLC as in current file also please help with placement as indicated in this chart . {image} {file} {image}

Please BlueRain kindly help look into this request. ... Thanks
  • #37,476
  • Jul 12, 2020 7:57am Jul 12, 2020 7:57am
Quoting Toto69
Hello all Coders and Programers Can you please create an indicator that print an arrow only when 2 consecutive barr low are not touching the 10 SMA high and when 2 consecutive bar high are not touching the 8 SMA low? Thanks {image}
Someone had asked for an mq5 version-

Jake_Bernstein_Market_Timing_Method_mq5
- up trend by 2 lows higher than the 10sma(high)
- down trend by 2 highs lower than the 8sma(low)
- options to use the current live bar in signals or only completed bars
- option of number of bars to check (default is 2)
- option of MAs (default is J.Bernstein's recommended above)
- styling options for arrows, MAs
- alerts provided
Attached Image (click to enlarge)
Click to Enlarge Name: jack bernstein market timing pic1.png Size: 71 KB
Attached File(s)
File Type: ex5 Jake_Bernstein_Market_Timing_Method_mq5.ex5   46 KB | 545 downloads
  • #37,477
  • Jul 12, 2020 9:13am Jul 12, 2020 9:13am
Quoting cja
{quote} This is a very simple way of deciding this discussion. 1/ Load the indicator into the Meta Editor and compile it - leave the Editor open 2/ Take the non-repainting indicator and put it on a M5 on the strategy tester. 3/ Run the tester so you get a complete new chart on the tester. 4/ Mark the turns with a vertical line. 5/ Compile the indicator in your Meta Editor. You decide if it repaints or not. Chart as it looks when run on the tester {image} Chart as it looks after re-compiling the indicator...
What is the indicator...its repainting???
  • #37,478
  • Jul 12, 2020 10:04am Jul 12, 2020 10:04am
Quoting Yeehc
{quote} ... button on chart to show extended horizontal line or to show short horizontal line instead (like current indicator default setting). 2. Add a toggle to hide or show all the horizontal lines..
MA_Crossover_Breakout_Lines_w_Tog_v1.3
- added btn to show/hide everything
- added btn to ext lengths by a given value
Attached Image
Attached File(s)
File Type: ex4 MA_Crossover_Breakout_Lines_w_Tog_v1.3.ex4   61 KB | 577 downloads
  • #37,479
  • Jul 12, 2020 10:05am Jul 12, 2020 10:05am
Hi guys, I would be very useful to me if someone could add the hide/show option to this indicator, Thank You.

Cheers, Baz
Attached File(s)
File Type: mq4 multiple time frame sup & res lines 99 (1).mq4   46 KB | 436 downloads
  • #37,480
  • Jul 12, 2020 10:24am Jul 12, 2020 10:24am
Quoting jeanlouie
{quote} MA_Crossover_Breakout_Lines_w_Tog_v1.3 - added btn to show/hide everything - added btn to ext lengths by a given value {image} {file}
Heyy Jean !! Thank you so much for your effort, I truly appreciate it from the bottom of my heart
92 traders viewing now, 4 are registered:
,
sohagbd
,
Themba312
,