I will code your EAs and Indicators for no charge | Page 1831 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #36,601
  • Jun 18, 2020 10:00pm Jun 18, 2020 10:00pm
Quoting navk
{quote} ...i think 3 or 4 bars...
If that's the case, then it is pretty much useless.
Learn from your mistakes and march on.
  • #36,602
  • Jun 18, 2020 10:04pm Jun 18, 2020 10:04pm
Quoting here2there
{quote} That's unfortunate. How badly does it repaint? Just on the last bar or does it change a bunch of bars at a time?
friend I have a very good do not repaint call me on private
  • #36,603
  • Jun 18, 2020 10:06pm Jun 18, 2020 10:06pm
Quoting sandipnegi
HI All, Can anyone code below amazing volume indicator with bull and bear moving avg. volume. Find below reference {image}
Check below image
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 72 KB
  • #36,604
  • Jun 18, 2020 10:19pm Jun 18, 2020 10:19pm
I Dont Need Any modifications Just Need Some Advices.

I made an ea From freelance

Its Indicator based
I tried Many best indicators but problem is I get My account Wiped When A Big Bullish or Bearish Move Occurs.

Logic Is

Buy *Lot on next Candle Of Buy Buffer and Sell *Lot on sell buffer

If One Buy trade Is Active and Second Buy signal come then Next Buy Will be *Lot+Lot
Means lotsize Will be 0.05 Then 0.05,- 0.10- 0.15- 0.20

And It dont Have Pip size Tp

All buy Trade Close On when profit Of all buy trade Reach *Profit

If *profit Is 10 then If 3 Trade Active And Total buy Profit Reach 10 then all buy trade Will be Closed

What should I can do to Avoid Long Bullish or Bearish Move?

Do close Trading On Friday Help?
Or Any more Ideas?

Thank you coders in advance For Replying me
  • #36,605
  • Jun 18, 2020 10:56pm Jun 18, 2020 10:56pm
Quoting sandipnegi
{quote} Check below image {image}
That looks like a very good volume indicator! I would like to have that!
Learn from your mistakes and march on.
  • #36,606
  • Edited 11:47pm Jun 18, 2020 11:27pm | Edited 11:47pm
Hello. Could anyone help me this this expert I just can not get it to fully function.

I have sent the ticket number to the buttons name. When the button is pressed it sends the buttons name "the ticket number".
The buttons work the first time around but fail to close the trade if there are multiple trades open.

Thank you.
Attached Image
Attached File(s)
File Type: mq4 Floating_Stop.mq4   10 KB | 512 downloads
  • #36,607
  • Edited 2:12am Jun 19, 2020 1:30am | Edited 2:12am
I got two EA's I got from forexfactory few days back. One got buttons on chart to trade, Other just adds stops/tp to existing orders. If I use them in two different charts on same pair, they work just fine, even with multiple orders. Buy and sell at the same time also works. I like them a lot, as they do not delete/mess up my fibs/trend lines etc. that i draw on my charts.

But I can't seem to combine them to execute in one chart...One use init() another use OnInit()
Can anyone help me to combine them together, I would appreciate it a lot.,

screenshot/Indicators.
Attached Image
Attached File(s)
File Type: mq4 TradingDashboard v2.mq4   18 KB | 609 downloads
File Type: mq4 lvoe 1.6.1.mq4   32 KB | 626 downloads
  • #36,608
  • Edited 3:01am Jun 19, 2020 2:32am | Edited 3:01am
Hello dear coders, I need a help to customize this indicator. Initially this indicator only draw an arrow whenever moving averages crossover, I would like a further option such as :

1. To enable the indicator to draw a horizontal line instead of arrows. It would be even better if it let its user to choose either arrow alert / horizontal line alert option in parameter

2. MTF option, ability to retrieve data from higher tf , let say i use M1 chart, I would like the horizontal ma crossover alert from M15

3. ability for the horizontal line to change color whenever the price touches the line ( can let user to change the color of horizontal line also )
LET say when the ma crossover is still fresh price havent touch , it will be limegreen color , once it touches it'll change to red color

4. 1 toggle button to show/hide fresh horizontal line

5. 1 toggle button to show/hide touched horizontal line
Attached Image (click to enlarge)
Click to Enlarge Name: Image1.png Size: 47 KB
Attached File(s)
File Type: mq4 MA Cross alerts.mq4   10 KB | 437 downloads
  • #36,609
  • Jun 19, 2020 5:57am Jun 19, 2020 5:57am
Quoting almo
@Here2There Here is version v1.02 - I have not found the bug that was reported. My testing has thus far been 100% successful SO......I made a couple changes here, and would like you to try it out on the system tester please Two new boolean inputs - amitesting (default = false) - if turned on , depending on value of buyorsell boolean, it will place 1 order , if there are no other orders. Additionally, there will be a Comment stating you are in Testing mode buyorsell - 0 = buy, 1 = sell With this, you can confirm if the EA is working correctly against...
Quoting almo
@Here2There, Here is the original {file} {file}
Hello almo,

I would like to ask please if you could take a time to explain with an example how to use these 2 EA with an example which are find under the following links

https://www.forexfactory.com/showthr...9#post13013249

https://www.forexfactory.com/showthr...5#post13013435

I really can't understand functionally, thank you in advance

Regards,
Moti
  • #36,610
  • Jun 19, 2020 7:07am Jun 19, 2020 7:07am
Quoting almo
{quote} HI Giraia_BR, Here is a script that will perform what you request. You have inputs for both SL and TP percentages, as well as how many bars back , which is currently defaulting to 1. {file}

hi almo

i was testing it but looks like it is not working. I tried with default parameters and a few other configs. Any idea to solve this?
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Image1.png Size: 57 KB
Click to Enlarge Name: Image2.png Size: 82 KB
  • #36,611
  • Jun 19, 2020 8:11am Jun 19, 2020 8:11am
Quoting giraia_br
{quote} hi almo i was testing it but looks like it is not working. I tried with default parameters and a few other configs. Any idea to solve this? {image} {image}

Hi Girala_BR,

The script works by checking the previous bar's High/Low and using a percentage of that range to determine the Stop Loss and Take Profit,

Seems to be fine on my end when checking EURUSD on the 15 minute bar. Keep in mind that price needs to be in between the previous bars High/Low else you might run into a problem with the stop loss

Also please check that "Allow Live Trading " is checked
Attached Image(s) (click to enlarge)
Click to Enlarge Name: EURUSDM15-buy.png Size: 17 KB
Click to Enlarge Name: EURUSDM15- Sell.png Size: 17 KB
Attached Image
  • #36,612
  • Jun 19, 2020 8:18am Jun 19, 2020 8:18am
Quoting Motiram
{quote} {quote} Hello almo, I would like to ask please if you could take a time to explain with an example how to use these 2 EA with an example which are find under the following links https://www.forexfactory.com/showthr...9#post13013249 https://www.forexfactory.com/showthr...5#post13013435 I really can't understand functionally, thank you in advance Regards, Moti
The Stop Loss and Take Profit are according to price rather than pips. You have to input the price.

Note: this is not a traditional Stop Loss that closes a trade when hit. It goes by the closing price of the candle. For example, if I am going long on EURUSD and I have a Stop Loss set at 1.12, the trade won't close when a candle or bar hits 1.12. It will only close when the closing price of that candle or bar is below 1.12 or whatever price you want, and vice versa for short trades.

Because an EA handles this, the broker doesn't know where you are going to take profit or at what area you plan to close your trade if it doesn't move in your favor.

Note: if you want the EA to work with manual trades, then you need to set the magic number to 0. If you want it to work in combination with another EA, then the magic number of each EA must be the same.

I am responding to your question because Almo generously made this EA in response to my request.
Learn from your mistakes and march on.
  • #36,613
  • Edited 8:38am Jun 19, 2020 8:21am | Edited 8:38am
Quoting Motiram
{quote} {quote} Hello almo, I would like to ask please if you could take a time to explain with an example how to use these 2 EA with an example which are find under the following links https://www.forexfactory.com/showthr...9#post13013249 https://www.forexfactory.com/showthr...5#post13013435 I really can't understand functionally, thank you in advance Regards, Moti

HI Motiram,

Both EA's are simiilar - the first link (v1.02) allows you to enter in a MagicNumber, a Take Profit Price, and a Stop Loss Price, which then monitors the current price against those settings.

The second link (StopLoss_only) , only monitors the Stop Loss price.


The EA is meant to work with other EA's that you may already have - SO if your other EA sets a Magic Number , this EA can use the same Magic Number, and then handle the Take Profit/Stop Loss for you , and doesn't transmit this information to your broker ahead of time. This is to prevent any potential stop loss hunting


v1.02 also has minimal testing capabilities - its meant to run only on the System Tester when you turn that boolean on, and it will submit one trade (either a buy or a sell), so that you can confirm that that EA is doing what you expect. This is NOT meant to place Live Trades. There is no logic included to perform that (meaning, its not checking for a cross over of MA's, Stoch = 20/80, etc)
  • #36,614
  • Jun 19, 2020 8:51am Jun 19, 2020 8:51am
Hello everyone

Can someone create me an indicator, I would to get an alert when price touches 200 EMA as shown in the picture below
Attached Image (click to enlarge)
Click to Enlarge Name: crossed.PNG Size: 116 KB
  • #36,615
  • Jun 19, 2020 10:04am Jun 19, 2020 10:04am
Quoting almo
{quote} Usmanshafeen, I think I understand what your asking, but I have a different problem with this code that requires someone smarter than me to solve I believe I fixed this New version and source have been uploaded. You will need to enter in all of the email information in your Terminal before this sends anything out. Control -O will bring that up, and then Pick the Email tab to put in your information. One last thing - if you get an error that says "Mail : Not enough Space", this apparently is a known bug in MQL4, and...
Dear sir Almo, what should i write in boxes given in picture
This is new for me.. kindly help me in this regard
Attached Image (click to enlarge)
Click to Enlarge Name: IMG_20200619_195451_841_1592578993344.jpg Size: 638 KB
  • #36,616
  • Jun 19, 2020 10:16am Jun 19, 2020 10:16am
Quoting Usmanshafeen
{quote} Dear sir Almo, what should i write in boxes given in picture This is new for me.. kindly help me in this regard {image}
This information you can find from your email provider.

so , if you were using Gmail for your email, it would be something like
"smtp.gmail.com:<port number - example in your picture is 25, but this may be different>

smtp login is your user name when you log on to your email
smtp password is your password when you log on to your email

From : you can put your email here (ie [email protected])
To: This is your email address that your sending it to (ie [email protected])

Please check with your email provider for the right port number, as it may not be port 25
  • #36,617
  • Jun 19, 2020 10:18am Jun 19, 2020 10:18am
Quoting Usmanshafeen
{quote} Dear sir Almo, what should i write in boxes given in picture This is new for me.. kindly help me in this regard {image}
In addition to the info Almo shared, you might find this helpful:
Inserted Video
Learn from your mistakes and march on.
  • #36,618
  • Jun 19, 2020 10:43am Jun 19, 2020 10:43am
Quoting here2there
{quote} In addition to the info Almo shared, you might find this helpful: https://www.youtube.com/watch?v=8gKZt4Lt58A
Bundle of thanks sir Almo
  • #36,619
  • Jun 19, 2020 10:44am Jun 19, 2020 10:44am
Quoting here2there
{quote} In addition to the info Almo shared, you might find this helpful: https://www.youtube.com/watch?v=8gKZt4Lt58A
Thanks alot sir
  • #36,620
  • Jun 19, 2020 10:45am Jun 19, 2020 10:45am
Quoting Usmanshafeen
{quote} Bundle of thanks sir Almo
I'm not Almo. But Almo certainly does deserve thanks for all the work he has freely done here to help others.
Learn from your mistakes and march on.
103 traders viewing now, 2 are registered:
yako47
,