I will code your EAs and Indicators for no charge | Page 1618 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #32,341
  • Jan 30, 2020 9:47pm Jan 30, 2020 9:47pm
Quoting hanover
{quote} Assuming you're using MT4, the attached indicator using the displayed settings should deliver the result shown in the screenshot. More info here. If this isn't what you're seeking, maybe somebody else can help you. {file} {image}
Thank you brother.
I will try it.
  • #32,342
  • Edited 1:39pm Jan 31, 2020 12:32am | Edited 1:39pm
Quoting gargindia
i am looking DeMarker Dashboard just similar to RSI Dashboard, shown pic bellow.
You didn't supply a formula for calculating the demarker value, so I simply found the demarker.mq4 indicator on the internet. I have no idea whether its calculation is correct. It generates values between 0 and 1, so I multiplied the result by 100 to remove the decimals, make the displayed values easier to read, and save screen space.

I modified RSI dashboard to call the demarker.ex4 using iCustom(). For this reason the demarker.ex4 must be installed, and calling iCustom() for 28 pairs x 9 timeframes means that the indicator takes a few seconds to calculate and display all of the values.

Default parameters generate the attached screenshot.
Attached Image (click to enlarge)
Click to Enlarge Name: PPI 681.png Size: 89 KB


That's the best I can do in the time I have available.

Disclaimer: I have seen no evidence that the demarker indicator can be used profitably. Like all price-drived indicators it must necessarily be lagging, and limited in its predictive capability. Read the links here for more info, and use the indicator at your own risk.
_____________________________

Quoting gargindia
i did compiled Demarker Dashboard but it gives 5errors
Sorry if my instructions were unclear. I was trying to say don't compile the indicator. mq4 files are useful only to programmers.

Anyway, the indicator now compiles cleanly using MetaEditor 5 build 1243. See screenshot. Thanks to FF member pips4life who generously updated my code libraries.
Attached Image (click to enlarge)
Click to Enlarge Name: PPI 682.png Size: 132 KB
Attached File(s)
File Type: ex4 Demarker dashboard b600.ex4   315 KB | 489 downloads
File Type: mq4 Demarker dashboard b600.mq4   298 KB | 450 downloads
File Type: ex4 Demarker dashboard.ex4   35 KB | 456 downloads
File Type: mq4 Demarker dashboard.mq4   9 KB | 497 downloads
  • #32,343
  • Jan 31, 2020 5:23am Jan 31, 2020 5:23am
Quoting ultax
Hi Does anyone know if it is possible to get MT4/MT5 (better) to display the VALUES of the Heikin Ashi as lines? For example the value in lines plotted (like moving averages) for the HIGH, LOW, OPEN and CLOSE?

So instead of a heikin ashi bar... 4 'lines' like 4 Moving Averages. But to be 100% clear, NOT moving averages of the HA result...

I want the RAW data values used in the formula. I am searching the web and not found much, apparently it can be done in TradingView but I need it for MT4, MT5. Thank you.

Anyone?

Or is there some MQL code that I can get the values of the candles(open, high, low, close)?
  • #32,344
  • Jan 31, 2020 5:56am Jan 31, 2020 5:56am
Quoting ktrimy
{quote} I modified the Forex Sweepmod Indicator so that it only alerts after a complete candle close. Hopefully this solves the repainting issue. {image} {file}
Hello, thanks for the improved Forex Sweepmod indicator, my English is weak. I ask you to add a flat filter to the indicator settings, the condition for the boom triggering occurred when the level was touched (add values 1.5 and -1.5 to the settings) with a blue line as in the screenshot.
Attached Image (click to enlarge)
Click to Enlarge Name: 2020-01-31_133549.png Size: 54 KB
Attached File(s)
File Type: mq4 forex sweepmod V2.2.mq4   18 KB | 701 downloads
  • #32,345
  • Jan 31, 2020 6:30am Jan 31, 2020 6:30am
Hello, im looking for master to code EA for my TS.
It's Based on MA+TDI (yes, simple)

Rules
Sell:
· Price under МА 80
· TDI red crossed downward by green on prev. candle (trade only on 2-d or 3-d candle after crossing)
· Other 3 MA becomes wider from each other, МА 6 down below.



Buy:
· Price above МА 80
· TDI red crossed upward green on prev. candle (trade only on 2-d or 3-d candle after crossing)
· Other 3 MA becomes wider from each other, МА 6 above



do not trade if prev. candle more then 2xATR



ММ:
Open two trades lot 0.01
First lot: TP 1хATR, SL 1,5xATR
Second: no TP, no SL, Trailing stop 1,5xATR

Any TF (more then 5 mins), any pairs
Like an option restriction of trading on 2-d or 3-d candle of TDI crossing can be switched off
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Screenshot8.png Size: 38 KB
Click to Enlarge Name: Screenshot9.png Size: 23 KB
Click to Enlarge Name: Screenshot10.png Size: 20 KB
Attached Images
Attached File(s)
File Type: ex4 TDI Red Green.ex4   16 KB | 431 downloads
File Type: mq4 TDI Red Green.mq4   9 KB | 459 downloads
  • #32,346
  • Jan 31, 2020 8:08am Jan 31, 2020 8:08am
Hello,

Please I need your help,

Is there a standalone application I can use to support EA/ Indicator account lock, time lock, demo lock etc....???
  • #32,347
  • Edited 9:09am Jan 31, 2020 8:56am | Edited 9:09am
Quoting ultax
{quote} Anyone? Or is there some MQL code that I can get the values of the candles(open, high, low, close)?
"One more average heiken ashi_Lines + alerts mtf"

Though i have not understand exact your query because you have not post any illustration pic/s,so guessing around.
Here is one of Mladen's HA code on OMA (one more average) moving average,that is slightly different comparing to rest of all averaging methods (sma,ema,smma,lwma) so on a long list.
So posting some explanations of oma,how to experiment and exercise different formations,might be some and or many of users dont know what OMA is
Speed
How OMA is calculated and or figured out for to format different displays - a little description and explanation by Mladen attached too.
If not it help you,i think possibly it can help to other users lurking around for to find/have good reliable stuff
The one in topic (oma HA) is with white/magenta colored line - in upper pic it is with some other HA bars ver
And in lower picture it with another regular OMA (same parameters) indicator for comparison purpose,for to see the difference in between HA OMA and regular OMA (Aqua/yellow colored)

Other than oma periods and speed features,this ver have
step feature
adaptive with (true/false) choice
better formula price with true/false option
full package alerts
mtf (interpolated)

Attached Image (click to enlarge)
Click to Enlarge Name: 1.1.png Size: 35 KB

Attached Image (click to enlarge)
Click to Enlarge Name: 2.2.png Size: 24 KB

Attached Image (click to enlarge)
Click to Enlarge Name: image_177002.png Size: 46 KB

Attached Image (click to enlarge)
Click to Enlarge Name: GBPUSDH1.png Size: 41 KB

Attached Image (click to enlarge)
Click to Enlarge Name: GBPUSDH1-haoma-stepomaaquagold.png Size: 36 KB

Attached Image (click to enlarge)
Click to Enlarge Name: p.png Size: 202 KB
Attached File(s)
File Type: ex4 One more average heiken ashi_Lines alerts mtf.ex4   41 KB | 468 downloads
  • #32,348
  • Jan 31, 2020 9:02am Jan 31, 2020 9:02am
Quoting mntiwana
{quote} "One more average heiken ashi_Lines + alerts mtf" Though i have not understand exact your query because you have not post any illustration pic/s,so guessing around. Here is one of Mladen's HA code on OMA (one more average) moving average,that is slightly different comparing to rest of all averaging methods (sma,ema,smma,lwma) so on a long list. Speed How OMA is calculated and or figured out for to format different displays - a little description and explanation by Mladen attached too. If not it help you,i think possibly it can help to other...
Wow thank you for such a reply. I dont quite think that is what I need though. I have attached an image of what I would like to see..... the value of Heiken Ashi Close plotted like a moving average.

Thank you!
Attached Image (click to enlarge)
Click to Enlarge Name: HA EXAMPLE.PNG Size: 25 KB
  • #32,349
  • Jan 31, 2020 9:17am Jan 31, 2020 9:17am
Quoting ultax
{quote} Wow thank you for such a reply. I dont quite think that is what I need though. I have attached an image of what I would like to see..... the value of Heiken Ashi Close plotted like a moving average. Thank you! {image}
Hi ultax
Why you cant post complete chart,if there any secret/s on it
how to figure out daily close on what,M1 chart,M15 chart or what so else
as you are new here,so like to inform you,mostly orphan and confusion posts possibly can be and will be ignored,overlooked due to time consuming and guessing around,mind reading is really a hard job
  • #32,350
  • Jan 31, 2020 9:30am Jan 31, 2020 9:30am
Quoting mntiwana
{quote} Hi ultax Why you cant post complete chart,if there any secret/s on it how to figure out daily close on what,M1 chart,M15 chart or what so else as you are new here,so like to inform you,mostly orphan and confusion posts possibly can be and will be ignored,overlooked due to time consuming and guessing around,mind reading is really a hard job
That is a complete chart, I just cropped prices and the currency pair as that's not relevant.

The daily close value.... so on the Daily time frame.

I believe formula for heiken ashi close uses open, high, low, close of candle before it... so I need to either a) indicator that can show that line or b) mql code to find out candle values
  • #32,351
  • Jan 31, 2020 10:52am Jan 31, 2020 10:52am
Quoting hanover
{quote} You didn't supply a formula for calculating the demarker value, so I simply found the demarker.mq4 indicator on the internet. I have no idea whether its calculation is correct. It generates values between 0 and 1, so I multiplied the result by 100 to remove the decimals, make the displayed values easier to read, and save screen space. I modified RSI dashboard to call the demarker.ex4 using iCustom(). For this reason the demarker.ex4 must be installed, and calling iCustom() for 28 pairs x 9 timeframes means that the indicator takes a few...
Resp. Hanover
big Thanks for your help........Thanks again
  • #32,352
  • Jan 31, 2020 11:07am Jan 31, 2020 11:07am
Hi Hanover,
please can you developer a Parabolic SAR Expert - for MetaTrader 5 that can be used to trade Volatility 75 indices,Volatility 100(1)s and other indices.Please if you can make it work on any time frame,i will be grateful.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: EA trade sample.JPG Size: 56 KB
Click to Enlarge Name: parameters for EA.JPG Size: 41 KB
Click to Enlarge Name: inputs__ for EA.png Size: 20 KB
Click to Enlarge Name: trades__1 from EA.png Size: 67 KB
  • #32,353
  • Jan 31, 2020 11:09am Jan 31, 2020 11:09am
Smi nrp
Attached File(s)
File Type: ex4 SMI.NRP.ex4   93 KB | 497 downloads
  • #32,354
  • Jan 31, 2020 11:43am Jan 31, 2020 11:43am
Quoting hanover
{quote} You didn't supply a formula for calculating the demarker value, so I simply found the demarker.mq4 indicator on the internet. I have no idea whether its calculation is correct. It generates values between 0 and 1, so I multiplied the result by 100 to remove the decimals, make the displayed values easier to read, and save screen space. I modified RSI dashboard to call the demarker.ex4 using iCustom(). For this reason the demarker.ex4 must be installed, and calling iCustom() for 28 pairs x 9 timeframes means that the indicator takes a few...
Resp. Hanover

as of your guidance, i did compiled Demarker Dashboard but it gives 5errors......see the screen shot
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 155 KB
  • #32,355
  • Jan 31, 2020 12:13pm Jan 31, 2020 12:13pm
Quoting gargindia
{quote} Resp. Hanover as of your guidance, i did compiled Demarker Dashboard but it gives 5errors......see the screen shot {image}
Code is clean for now regarding errors though few warnings exist
using latest build (2302 - 24 jan 2020) editor
Attached File(s)
File Type: mq4 Demarker dashboard.mq4   9 KB | 410 downloads
File Type: ex4 Demarker dashboard.ex4   203 KB | 389 downloads
  • #32,356
  • Jan 31, 2020 1:49pm Jan 31, 2020 1:49pm
Coders,

Disclaimer - I'm not a programmer.

I need to create a tool or an indicator that joins several indicators that I already have and that when there is a confluence of signs a single arrow appears.
I need you to have an option where I can choose which indicators will be used. After choosing, an arrow appears only when there is a confluence of the signals.
To do this all these indicators needed to be integrated in your custom indicator. and then you will have option to enable/disable any indicator.
See the picture with a possible example.

for example, Let's say I want to use the Indicators with the name: X Y Z Another day I want to use the indicator N A B Another day I decide to use other indicators Y K B W T

Could someone provide some insight on how to make this happen? I do not have the source code for the indicators. Anyway to make this happen just going off the indicator arrows?
Attached Image (click to enlarge)
Click to Enlarge Name: ScreenShot01376.jpg Size: 183 KB
  • #32,357
  • Edited 8:19pm Jan 31, 2020 2:23pm | Edited 8:19pm
Quoting consultant
Coders, Disclaimer - I'm not a programmer. I need to create a tool or an indicator that joins several indicators that I already have and that when there is a confluence of signs a single arrow appears. I need you to have an option where I can choose which indicators will be used. After choosing, an arrow appears only when there is a confluence of the signals. To do this all these indicators needed to be integrated in your custom indicator. and then you will have option to enable/disable any indicator. See the picture with a possible example. for...
As far i know of,coppock and vertex both not suitable for signaling purpose (may be used for estimating) but dot mms (it is rsi) is ok
multiple instances of any indicators and any combination is possible with true/false option by coders
source code is not a problem,there are so many variations of said indicators are available in the wide wide net
  • #32,358
  • Jan 31, 2020 5:29pm Jan 31, 2020 5:29pm
Quoting consultant
I need to create a tool or an indicator that joins several indicators that I already have and that when there is a confluence of signs a single arrow appears. I need you to have an option where I can choose which indicators will be used. After choosing, an arrow appears only when there is a confluence of the signals. To do this all these indicators needed to be integrated in your custom indicator.
As far as I know:

You could create a 'master' indicator that used iCustom() to get the values from each of your component indicators, provided that the latter are using data buffers (as opposed to objects, or anything else) to paint their signals. When you use iCustom(), you pass it the symbol, timeframe, the component indicator's name and settings you want it to use, which data buffer (some indicators plot multiple lines) , and which datapoint (candle) that you want it to retrieve the value for. When your master indicator has obtained these values from whatever component indicator(s) you choose, it can then use any logic that you specify to determine how to process the signals. Additionally, this logic could be driven by the master indicator's parameter settings. More info on iCustom() here. You would need to supply the programmer with the .ex4 files of your component indicators, to allow him to figure out the syntax of the necessary iCustom() calls.

As an an alternative, you could embed the logic in the component indicators into the master indicator, eliminating the need to use iCustom(). However, if you do it this way, you would need to supply the programmer with the .mq4 (source code) files of the component indicators, so that he can copy/paste the necessary program logic. With this alternative, there is likely more more programming work involved, but the end result should be more effcient and run faster, because the iCustom() calls to the component indicators are eliminated.

I'm not offering to do the work, btw, I'm merely attempting to answer your question.
  • #32,359
  • Jan 31, 2020 10:09pm Jan 31, 2020 10:09pm
Quoting mntiwana
{quote} Code is clean for now regarding errors though few warnings exist using latest build (2302 - 24 jan 2020) editor {file} {file}
Resp. mntiwana
Thanks for your kind helppppp
i installed your Demarker dashboard........but it is not working for me....see the screen shot
thanks....
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 107 KB
  • #32,360
  • Jan 31, 2020 10:42pm Jan 31, 2020 10:42pm
Quoting ktrimy
{quote} Hmm yep. Based on how it's coded the bars naturally repaint and fixing it would render most of the code useless, so I just wrote a barebones 2Lwma cross (Which is basically the core of your indicator) so you'd see what the results would be like without the repainting factor. Feel free to use it if you'd like. {image} {file}
Hi ktrimy,
Is it possible to modify this indicator to include Max Range switch in this indicator ? With an additional input for minutes.
With possibility of (a) finding out both Max range and minutes it consolidated by drawing a shadow .
(b) finding out just Max range with an alert function (popu up screen, email and notification).
(c) finding out just Time (minutes) with an alert function

It becomes a quick glance study tool to identify consolidation zones and take decision on trading.

For example, Maximum range inputted with any of small size of pips like 4, 5, 6, 7, 8 will show a trader how much time it took for the consolidation to last so
that the probability of the price moving in one or the other direction can be explored.

Thank you
Attached Image(s) (click to enlarge)
Click to Enlarge Name: GDAXIM5 Max range spike bar idea.png Size: 102 KB
Click to Enlarge Name: Pls include Max Range in spike bar indicator.jpg Size: 377 KB
Attached File(s)
File Type: mq4 spikebars_v3_2 alerts.mq4   13 KB | 487 downloads
Practice makes a person perfect
125 traders viewing now, 1 is registered:
jaewonyang