I will code your EAs and Indicators for no charge | Page 1224 | Metals Mine

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #24,461
  • Jun 14, 2018 2:04am Jun 14, 2018 2:04am
Quoting LuizSchiavi
{quote} Hi, Thanks. I will check and made some tests to see.
No problem friend

Cheers
Don't Be A Hard Worker, Be A Smart Worker
  • #24,462
  • Edited 8:42am Jun 14, 2018 3:51am | Edited 8:42am
hi there
im trying to write an EA with VBFX system but i,m stuck on early stages ...! i have problem to get the values of of upper band and down band of VBBands 600 for further use in EA.
and as i input several buffer but no right number apears on the screen compared to the windows data values info!
i will post the system and my code Below.
thanks for your help Friends.

PS:chart shouldn't be renko necessarily ,working with normal chart is fine , the values of the bands are matters.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 50 KB
Attached File(s)
File Type: rar VBFX Forex System.rar   574 KB | 754 downloads
File Type: mq4 VBFX EA.mq4   2 KB | 578 downloads
  • #24,463
  • Jun 14, 2018 4:23am Jun 14, 2018 4:23am
Quoting AutoT
{quote} Almost similar to what you looking for; although there is no indicator included inside. Cheers AutoT {file}
Hi,

Sorry, but I have made some backtests in DAX and all tests fail.

And also, this is not my requested in the post....

  • #24,464
  • Jun 14, 2018 4:31am Jun 14, 2018 4:31am
Quoting LuizSchiavi
Hello, I have a profitable strategy to use in DAX (Ger30) with Renko Box 100. I will explain here, Can someone code ? EA inputs: 1 - Initial Lot size 2 - Total of grid orders 3 - LotSize Factor = To multiply the next order openned by the grid 4 - the parameters of the SWingzigzag to be seted (I'm upload also the SwingZZ indicator) 5 - Minimum Swingzigzag leg to open the first position, like the picture that i have uploading here, showning 3000 points 6 - Grid distance (for each order), The best results is 1200 points to 2000 points Close all orders...
Hello everyone,

Can someone answer my request here ?
  • #24,465
  • Jun 14, 2018 9:56am Jun 14, 2018 9:56am
The ADX on the bottom of this pic has a step setting. Does anyone know where I can get that ADX indicator?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 160 KB
  • #24,466
  • Jun 14, 2018 10:09am Jun 14, 2018 10:09am
Quoting mojepole
{quote} there You go {file}

Thanks for the quick response, the only issue with it is it doesn't draw the MACD signal and price lines, only the arrows.
Could it be possible to draw the lines so as to limit the number of indicators?

Thanks once again.
Attached Image (click to enlarge)
Click to Enlarge Name: ADR PIVOTS 13.png Size: 88 KB
Let it turn and find your entry.
  • #24,467
  • Jun 14, 2018 10:34am Jun 14, 2018 10:34am
Hello,

I was hoping someone could make some simple changes to the following indicator;

1) Have the facility to put a date/time range in place rather then just X number of Days back, i.e. 00:00 4th to 00:00 8th June
2) Have the facility to split out the 'FiboMaxMinColour' so that a colour can be selected for each line independently
3) Have the facility to change width of lines and for it to stay that way, i.e. at the moment when you change line width it doesn't remember to keep the setting
4) The lines should only go back to the beginning of the last day, i.e. 00:00 and not be drawn all the way across the screen

Attached File(s)
File Type: mq4 FIBONACCI2.mq4   12 KB | 570 downloads


Thank you
Zaf
  • #24,468
  • Jun 14, 2018 11:48am Jun 14, 2018 11:48am
I want to make a list of MTF PrintText base on DSS Bressert
Output like:

W1 13 Up
D1 9 Up
H4 1 Dn
H1 2 Dn
M30 3 Dn
M15 5 Dn
M5 8 Up
M1 8 Up

Counting All the timeframe to make a table on counting seen last Zigzag trend.
Since TD Sequential take care on the ninth and thirteen candles on time finish.
This is better for MTF version to take general decision.
From above example, it may be the good time to open SELL order next bar on counting.
  • #24,469
  • Jun 14, 2018 12:29pm Jun 14, 2018 12:29pm
Ok, i have tried this for days now and i'm not getting anywhere with it...

I'm trying to do simple support and resistance that part is ok(ish) then i draw Trend line from start of the high/low straight to the right and delete the trend line if a higher high or lower low is formed

BUT... Now i get to the point where i want 1 sell order at each resistance and 1 buy order at each support.
I get A lot of them or no orders at all... well im up to 1 now but... lol.

I attached what i have at the moment, if someone can help steer me in the right direction. Give me some advice or anything. Or some better programmer might get a good laugh at the mess i created

DON'T USE IT LIVE! it puts a sell limit order at the moment at the closest high (i think). in tests it do anyway... just so you know.
(It used to be someone else's code its been modified many times in many attempts to do this, there are still some code that's not being used in there)
Attached File(s)
File Type: mq4 SR_TEST_25v2_sdfgsdfg.mq4   24 KB | 467 downloads
  • #24,470
  • Edited 2:07pm Jun 14, 2018 12:33pm | Edited 2:07pm
Quoting jswnz
{quote} Hi Lalo This is my first post here at FF. My post is a little off topic - but relates to another thread where you mentioned a host of 14 MTF indicators you have developed. This was mentioned in a thread discussing the possibility of having an MTF indicator work in backtesting enviornment. As you know a lot of very useful MTF indicators are out there - but fail in backtesting mode. So I thought I would post here - asking if you have any of these gems available - I am sure others would find them useful - especially if they work in backtesting....
Hi jswnz, i will say you the painfull TRUE. I was surprised of the no interest of the members, but professionnal traders are not in the majority, like in real life, 1 to 5 percent win. For the most, trading is a hobby, and an hobby cost money.

I'm sorry to see good programmers experimenting with hundreds of strategies, all more ridiculous than others. They are like lab rats in a labyrinth. I have tried to create a team, but most are too busy, programming EAs based on losing strategies on the long term.
I know a good programmer who spent 7 years, full time, looking for the grail before he gave up, discouraged. He would have done better copying profitable strategies from professionals.

Professionnals traders use 3 or more timeframes, they use the only vantage they have on big banks and big hedge fund, it's the easy entry with moderate sizing of the lots to follow trends like a pilot-fish, this gives a big reward risk with high probability of succes. MTF is not an option for professionnals!
They can't effectively see their strategies on paper trading, and can't backtest.
(example: if a cross occur on H4 or H1 graph and they take position on a retracement on M15 or less, it's not possible to say if the conditions were good in the highers timeframes)

True MTF can easily avoid tens and more of useless coding and backtests, the TRUE MTF indicators are perfect for paper trading, to understand the interaction of cycles between the differents timeframes, confluences, recurrence, anomaly. Backtests are 100% sure also.
A lot of standart indicators are not coded for MTF backtests, and they see the futur in this case, the majority of MTF indicators on internet repaint the higher timeframes, some are vicious and interpolated and of course repaint.

For now i have done 18 indicators TRUE MTF, and it's not the end, for now SMA(+HiLo), EMA(+HiLo), CCI, Stochastic(+signal), RSI, TDI, TRIX(+signal), Disparity-index, KST(+signal), TRIX(+signal), MACD(+signal), BBands(+HiLo), McGinley, Momentum, StdDev, Envelopes, ZeroLag MACD(+signal), ATR.
I made them to be as fast as possible, i reuse previous calculations as much as possible, the goal is to make them faster and less memory consumer than the original non MTF, so they can be used on live.

I want to help non-professionals if the strategy is good, with true MTF indicators, i can see this easily without coding, i do not have any illusions about profitability of non professionals.

To return to the subject, your strategy is like this graph?
Attached Image (click to enlarge)
Click to Enlarge Name: Sans titre99.png Size: 89 KB
Trade Less, trade Better, trade True MTF!
  • #24,471
  • Jun 14, 2018 2:52pm Jun 14, 2018 2:52pm
Quoting Intrepidpips
{quote} Thanks for the quick response, the only issue with it is it doesn't draw the MACD signal and price lines, only the arrows. Could it be possible to draw the lines so as to limit the number of indicators? Thanks once again. {image}
I tried and it is working with me as it is (default)
any way it is NMC for now - try now
or may be you using two same instances with out Unique ID
Attached Image (click to enlarge)
Click to Enlarge Name: EURUSDH1.png Size: 45 KB
Attached File(s)
File Type: mq4 MACD nrp mtf & alerts arrows.mq4   11 KB | 713 downloads
File Type: ex4 MACD nrp mtf & alerts arrows.ex4   43 KB | 647 downloads
  • #24,472
  • Jun 14, 2018 3:01pm Jun 14, 2018 3:01pm
Quoting Intrepidpips
{quote} Thanks for the quick response, the only issue with it is it doesn't draw the MACD signal and price lines, only the arrows. Could it be possible to draw the lines so as to limit the number of indicators? Thanks once again. {image}
Sorry, I thought that arrows will be enough. This is what i have about MACD; i am not a coder so cannot change it.

regards
  • #24,473
  • Jun 14, 2018 3:27pm Jun 14, 2018 3:27pm
Quoting MaxDeo
Hello, need some some help, on making this Indicator as MTF. look good for overbought and oversold, on pic you can see that it has better signal then Stoch any one can help, please? {file} {image}
is there any one who can make it MTF?
  • #24,474
  • Jun 14, 2018 3:38pm Jun 14, 2018 3:38pm
Quoting mntiwana
{quote} I tried and it is working with me as it is (default) any way it is NMC for now - try now or may be you using two same instances with out Unique ID {image} {file} {file}
I warn you, that your indicator repaints a lot, backtest in 1mn with 60 minutes in the indicator, you will see the arrows appear and disappear a long time before, impossible to win.
Trade Less, trade Better, trade True MTF!
  • #24,475
  • Jun 14, 2018 3:38pm Jun 14, 2018 3:38pm
Quoting Sara.sasha
hello Can anyone convert the following indicator (Slope Direction Line), like an indicator (MTF DashBoard v3) with User-configurable: peiod method price color change: current candle/close candle {file} {file}



There is no indicator designer who will do my request on post 24087?
  • #24,476
  • Jun 14, 2018 5:56pm Jun 14, 2018 5:56pm
Quoting mojepole
{quote} Sorry, I thought that arrows will be enough. This is what i have about MACD; i am not a coder so cannot change it. regards

The arrows are good enough, thank you.

Quoting mntiwana
{quote} I tried and it is working with me as it is (default) any way it is NMC for now - try now or may be you using two same instances with out Unique ID {image} {file} {file}

Thanks so much, very kind of you.
Let it turn and find your entry.
  • #24,477
  • Jun 14, 2018 6:25pm Jun 14, 2018 6:25pm
I really like this Gann High-Low Activator indicator.

Problem is, if I change any settings in the MetaEditor the indicator will stop working all together.

Can anyone fix this please?
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 135 KB
Attached File(s)
File Type: ex4 Gann high-low activator mtf alerts.ex4   32 KB | 517 downloads
File Type: mq4 Gann high-low activator mtf alerts.mq4   7 KB | 638 downloads
  • #24,478
  • Edited Jun 15, 2018 1:04pm Jun 14, 2018 7:30pm | Edited Jun 15, 2018 1:04pm
Quoting Lolo37
{quote} Hi jswnz, i will say you the painfull TRUE. I was surprised of the no interest of the members, but professionnal traders are not in the majority, like in real life, 1 to 5 percent win. For the most, trading is a hobby, and an hobby cost money. I'm sorry to see good programmers experimenting with hundreds of strategies, all more ridiculous than others. They are like lab rats in a labyrinth. I have tried to create a team, but most are too busy, programming EAs based on losing strategies on the long term. I know a good programmer who spent...
I got gmacd2.mq4 sometime ago.
This makes a group on timeframe decision on view.
From H4 to M15 to make timeframe combo, as you can see the original source code.

Now I would like to make the right timeframe to see.
Inserted Code
H4    H1    M30    M15    TimeFrame to handle
Trend    Trend   whatever~    H4
Trend    Sideway    Trend    Sideway    M30
Sideway    Sideway    Sideway    Sideway    M15 (Or suppose NOT to trade)

Rule is just find the laregest timeframe on Trendy with Sideway on next Higher timeframe
But Special highlight if both H4 and H1 is trendy, take H4
Attached Image (click to enlarge)
Click to Enlarge Name: 20180615_gmacd3_screenshot.png Size: 4 KB
Attached File(s)
File Type: mq4 GMACD3.mq4   19 KB | 524 downloads
  • #24,479
  • Jun 14, 2018 7:47pm Jun 14, 2018 7:47pm
Quoting Lolo37
{quote} I warn you, that your indicator repaints a lot, backtest in 1mn with 60 minutes in the indicator, you will see the arrows appear and disappear a long time before, impossible to win.
I think (that your indicator) your warn dont belongs to me neither to original author - as arrows belongs to the one who tried help some one on request
And a little info for you too,the code in question belongs to Mladen,so there is no repainting issue (i believes) ,not only within this but thousands rest of his codes,almost every user knows this fact,simply you are new -
  • #24,480
  • Jun 14, 2018 7:53pm Jun 14, 2018 7:53pm
Quoting TonyJohnCn
The ADX on the bottom of this pic has a step setting. Does anyone know where I can get that ADX indicator? {image}
Have you ever tried any ADX with higher TFs
165 traders viewing now, 1 is registered:
saoco111