I will code your EAs and Indicators for no charge

Quoting cja

Disliked

{quote} I suspect you have no response to your request as the indicator you have posted is decompiled and few coders on this Forum will alter decompiled code. {image}

Ignored

Quoting Nicholishen

Disliked

Hey guys. When you post code can you please use the code tags? It's the button that looks like </> void MarginProtect() { //////////////MARGIN BUY if(totalBuyLot()>=(Lots*4) && Bid-lastOrderPrice(Op_Buy)>PriceRange*PipValue*Point) { double tb=totalBuyLot(); double sb=totalSellLot(); for(int i=OrdersTotal()-1; i>=0; i--) { if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES)) { //////BUY if(OrderSymbol()==Symbol() && OrderMagicNumber()==OrderId && OrderType()==OP_BUY) { if(tb-OrderLots()>(0.02)) { bool ret=OrderClose(OrderTicket(),Lots,Bid,Slippage,Red);...

Ignored

Quoting mellaimom

Disliked

{quote} Hello Everyone, I hope im not violating any forums rule by posting this here. ive been trying to code a logic into my EA for while but i cant seem to figure it out. Hope u can help .. Scenario ------------ i have multiple op_buy orders opened at same price in this sequence with lots, 0.01,0.03,0.06,0.12... i want to circle through all the buy orders close them and leave only a certain lot (lets assume 0.02).. Can you help with some code. void MarginProtect() { //////////////MARGIN BUY if(totalBuyLot()>=(Lots*4) && Bid-lastOrderPrice(Op_Buy)>PriceRange*PipValue*Point)...

Ignored

   double LotsSave1 =0.02, LotsSave2 =0.03;
  
   void MarginProtect()
  {
//////////////MARGIN BUY
   if(totalBuyLot()>=(Lots*4) && Bid-lastOrderPrice(Op_Buy)>PriceRange*PipValue*Point)
     {
      double tb=totalBuyLot();
      double sb=totalSellLot();
      for(int i=OrdersTotal()-1; i>=0; i--)
        {
         if(OrderSelect(i,SELECT_BY_POS,MODE_TRADES))
           {
            //////BUY
            if(OrderSymbol()==Symbol() && OrderMagicNumber()==OrderId && OrderType()==OP_BUY)
              {
               double lot =OrderLots();
              
               if(lot!=LotsSave1 && lot!=LotsSave2)
                 {
                  bool ret=OrderClose(OrderTicket(),lot,OrderClosePrice(),Slippage,Red);
                  continue;
                 }
              
               if(lot==LotsSave2)
                 {
                  ret=OrderClose(OrderTicket(),lot-LotsSave1,OrderClosePrice(),Slippage,Red);
                 }
              }
            
            else if()
              {
               ///////////This Is Where i Got Stuck Cant Figure Out The Logic
              }
           }
        }
     }

Quoting lghr

Disliked

{quote} can do so simply: double LotsSave1 =0.02, LotsSave2 =0.03; void MarginProtect() { //////////////MARGIN BUY if(totalBuyLot()>=(Lots*4) && Bid-lastOrderPrice(Op_Buy)>PriceRange*PipValue*Point)

Ignored

Quoting NgCasper

Disliked

Dear All, I would like to have some suggestion to improve my martingale EA, so far run few week without any issue. But when have big movement and news, the martingale level will go high, i need some solution to prevent it keep open higher lot size. Attachfile is my EA, i also try on demo account till now 28/7/2017 and have gain around 13% so far. To use the EA, just change the account number to your MT4 account number, and the rest use default setting will do. Default Equity is $10000 and 1:1000 leverage in AUDUSD, 5 digit pair. Please give some...

Ignored

Quoting wansiman

Disliked

Hi if i want to scalp with the renko indicator and use 2 pips boxsizes the platform freezes can someone repair this maybe a maximum numbers of bars to load ? {file}

Ignored

Quoting kelvinonw

Disliked

{quote} I really will like to PM u but as a new member i dont have the PM privileges. But let me explain more about the x - 1,2,3 Strategy Find X1 candle=the candle that represent the swing high/low candle! Find X1 zone and draw lines which=(on uptrend) the upper part of the body of the candle (Note: It's not the open of candle cause it could be a up/down candle-It's specifically the upper part of the body) and the true low of candle (including wick) The area inside these 2 lines will be called x1 zone! Find x2 candle: (In uptrend)-x2 candle=most...

Ignored

Quoting reteid2222

Disliked

{quote} Yes...but for that u don t need 700 lines....!!!! And there is stoch and atr also inside....i don t know how it works... What are buy/sell signals?

Ignored

Quoting jaco295

Disliked

Hi all! I don't know if this is allowed here, but I need to either ask or beg for it it here. For some reason I am unable to find an ea that gives constant profit results anywhere!! I have tried, bought a few ea's and tested it with no really success?? Either I don't know where to look or just plain cannot see it?!! Are there anyone out here that can refer me to any ea product that you can recommend, that stood the test of time? Sorry admin, I am not sure if this is allowed. If not, delete the message.

Ignored

Quoting merlin1331

Disliked

{quote} i can tell you you will not find any profitable eas in any public forum or other online markets, i try that before, that is waste time. you can only do the best way is to creat your strategy , and made them into your ea. that is the truth. if you rely on those ea products, it will definitely fail at last.

Ignored

Quoting shabirsaleem

Disliked

Hello Master coders, I hope you are doing well. If you have time, could you please go through the bellow codes, 1)I have an EA which opens maximum 2 trades in one direction (2 buys). So after the EA opens two trades, I want the EA to open another one trade in the opposite direction (1 sell), 2)The TP for the first two trades (2buys)are the same. So if the trend goes against me, I can recover some of losses from opening 1 sell. The sl for the sell trade is the tp for the 2buys. 3)200 is sl but I want sl for sell to be the same as tp of 2buys so the...

Ignored

Quoting kelvinonw

Disliked

{quote} BUY/SELL Signals are generated when x3 candle appears on chart. usually there is a sound alert with popup. the problem though is the indicator sometimes is wrong about x3 kindly take a look at the image maybe this helps. correction needed is x3 candle must pass through x2 body and close above x2 upper body(with or without the upper shadow of x2 included) for a buy signal. reverse is true for a sell signal. but the error here is the indicator also show x3 on chart when a candle open above the upper body of x2 and close above the upper shadow...

Ignored

Quoting kelvinonw

Disliked

{quote} BUY/SELL Signals are generated when x3 candle appears on chart. usually there is a sound alert with popup. the problem though is the indicator sometimes is wrong about x3 kindly take a look at the image maybe this helps. correction needed is x3 candle must pass through x2 body and close above x2 upper body(with or without the upper shadow of x2 included) for a buy signal. reverse is true for a sell signal. but the error here is the indicator also show x3 on chart when a candle open above the upper body of x2 and close above the upper shadow...

Ignored