GT Gold (GTT.V) released the results of the initial metallurgical test program on two samples taken from its Saddle copper-gold porphyry project in British Columbia. The samples contained a high-grade and low-grade mass with each of both samples consisting of three different zones. The high grade sample had an average grade of 0.5% copper, 0.92 g/t gold and 1.56 g/t silver and resulted in a recovery rate of 88% of the copper and 67% for gold resulting in a copper concentrate grading 24.5% copper and 32.2 g/t gold. The larger composite sample of the lower grade material had an average grade of 0.3% copper, 0.45 g/t ... (full story)