US auto strike set to cut metals consumption
A possible strike by US automotive union workers against the Big 3 auto companies would curtail metals consumption.
A strike by the United Auto Workers (UAW) union against Ford Motor, General Motors (GM) and Stellantis could begin as early as next week when the current contract expires the night of 14 September. Negotiations have remained contentious as the UAW pushes for more than 40pc pay increases and Ford and GM have countered with proposed pay hikes of less than half that level. UAW president Shawn Fain has said any auto company without a new contract by the current deadline will be threatened with strike.
The three companies sold an average of 552,800/month vehicles in the second quarter, when each posted profits above $1.9bn.
Based on these sales, US consumption of flat steel could shrink by as much as 409,000 short tons (st)/month with an additional 138,200st/month of other steel consumption and 134,300st/month of aluminum consumption, according to an Argus analysis of vehicle composition data. Copper consumption would be curtailed another 13,800st/month.
The consumption data was calculated using the three auto company's quarterly sales figures and data from the American Iron and Steel Institute on average aluminum and steel weights contained in each vehicle. Figures for copper consumption came from the Copper Development Association.
The lost steel consumption would ripple into an already oversupplied steel market, where at least two companies, integrated steelmaker US Steel and electric arc furnace (EAF) steelmaker Steel Dynamics (SDI), combined to produce an estimated 972,000st more steel than they shipped in the first half of the year.
While US Steel's extra production is all flat steel products, SDI's is likely a mixture of flat and long products.
US steel consumers have been so concerned by the possibility of a strike that many have held off buying additional steel for weeks, cutting into their inventories as they await the results of the labor negotiations.
A short strike could lead to whiplash in the steel market, with inventories low and overall demand remaining steady in the market, potentially forcing some buyers back into the market.
A more extended strike could curtail large amounts of steel consumption and lead steel mills to make tough decisions about whether or not they keep steel production running, or idle it to cut costs and supply.
The impacts would primarily hit automotive-heavy integrated steelmakers Cleveland-Cliffs and US Steel, with some impacts rippling to the EAF steelmakers Nucor and SDI.
| Metals impact of auto strike | short tons (st) | |||
| Companies | Monthly vehicle estimate (US) | Estimated steel consumption | Estimated aluminum consumption | Estimated copper consumption |
| Vehicle production and metals consumption | ||||
| Ford | 177,221 | 175,449 | 43,065 | 4,431 |
| GM | 230,659 | 228,352 | 56,050 | 5,766 |
| Stellantis | 144,883 | 143,434 | 35,207 | 3,622 |
| Total | 552,763 | 547,235 | 134,321 | 13,819 |
| American Iron and Steel Institute, Copper Development Association, auto company quarterly sales figures | ||||
| Figures are likely an underesimate based on scrap generation | ||||
Related news posts
ThyssenKrupp Schulte to close seven sites: sources
ThyssenKrupp Schulte to close seven sites: sources
London, 22 May (Argus) — ThyssenKrupp Schulte will close seven sites as part of its restructuring drive, market sources told Argus today. The company will close stockholding warehouses in Braunschweig, Rheine, Munich, Nuremberg, Freiberg, Mannheim and Frankfurt, according to multiple market sources. Last month the company said it would be closing sites and cutting around 450 jobs, but did not reveal which sites would be affected. "Fundamental structural adjustments are necessary to better respond to market changes in the future", the company said when it announced the restructuring, citing declining materials demand and increasing demand for materials-related services. All the impacted locations are stockholding sites and do not provide additional processing. ThyssenKrupp Schulte is part of ThyssenKrupp Materials Services and distributes stainless, carbon and non-ferrous metals from around 40 locations. A ThyssenKrupp Materials Services spokesperson said it could not comment on the affected locations, as "discussions with the respective co-determination bodies have only just begun and the details of the transformation are the subject of these discussions". "At ThyssenKrupp Schulte we are aiming to transform the business model in order to increase the company's profitability and enable Schulte to respond even better to changing customer needs," the spokesperson added. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan’s Kobelco to shut basic oxygen furnace, build EAF
Japan’s Kobelco to shut basic oxygen furnace, build EAF
Tokyo, 21 May (Argus) — Japan's Kobe Steel (Kobelco) will close one of the two basic oxygen furnaces (BOFs) at its Kakogawa steel works, looking to replace it with an electric arc furnace (EAF). Kobelco will invest ¥300bn ($1.9bn) to accelerate reducing greenhouse gas emissions by introducing a new EAF, the company said on 20 May as part of its mid-term strategy for the 2024-26 fiscal years. This will result in a closure of a BOF at Kakogawa. It will finalise the decision for introducing an EAF in the early part of its 2024-26 mid-term strategy period, Kobelco said, aiming to start producing crude steel with scrap metal sometime during the 2030s. Kobelco produced 5.9mn t of crude steel during the 2023-24 fiscal year ending 31 March, down by 3.5pc from the previous year. It forecasts producing around 6mn t during 2024-25, according to data separately announced by Kobelco on 9 May. The company did not disclose the production of each BOF at Kakogawa. This is the latest major Japanese steel firm that specialises in BOF production to announce proposed EAF operations, following Nippon Steel and JFE. Nippon Steel started commercial operations in 2022, while JFE plans to start in 2027. Kobelco's switch to EAF production will lead to further concerns about scarcity of scrap in Japan . The supply shortage could be as high as 5mn t in 2030 and 11mn t in 2050, according to a 2022 report by the country's trade and industry ministry. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Southeast Asian steel demand to rise in 2024: Seaisi
Southeast Asian steel demand to rise in 2024: Seaisi
Shanghai, 21 May (Argus) — The Southeast Asia Iron and Steel Institute (Seaisi) estimates that southeast Asian countries' steel demand will grow by 3.7pc from 2023 to 76.5mn t in 2024. But the growth rate fell below previous expectations considering high global inflation risks, volatile prices and a demand slowdown in China and many other regions, the institute said at the 2024 Seaisi conference in Vietnam held over 13-16 May. Steel demand in the six major countries of the Association of Southeast Asian Nations (Asean-6) fell by 1.9pc from 2022 to 73.5mn t in 2023, Seaisi said. Asean-6's steel production also dropped by 2.1pc on the year to 49.4mn t in 2023, in line with contracting demand. Asean-6's net imports slid by 1.3pc on the year to 24.3mn t in 2023. Lower external demand, high inflation and interest rates as well as tightening global financial markets were the main reasons for steel industrial setbacks last year. It led to a slowdown in construction sectors and steel industrial destocking activities in the region. Steel demand in Malaysia, Philippines and Vietnam fell by 14pc, 7.5pc and 4.8pc respectively in 2023, weighing on regional industrial performance although demand rose by 18pc in Singapore and 6.3pc in Indonesia, Seaisi said. Thailand's steel demand edged down by 0.1pc in 2023. Asean regional steel demand was expected to increase in 2024 because Asean-6 governments were optimistic about achieving their economic growth targets, given strong private consumption in most countries, the rolling out of infrastructure and construction projects, a recovery in tourism and electronics, and as inflation rates move towards targeted ranges. But the region will continue to experience challenges from supply chain uncertainties on the back of escalating geopolitical tensions and wars, weakening Asean currencies except for the Singapore dollar, economic slowdowns outside of Asean, volatile commodity prices, and extreme weather, Seaisi said. Seaisi did not provide a forecast for regional steel production in 2024, but it sees steel capacity expansions in the region leading to overcapacity issues. It expects Asean-6 crude steel capacity to rise from 78mn t/yr in 2022 to 94mn t/yr in 2024. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Roy Hill's WA iron ore loadings support WA exports
Roy Hill's WA iron ore loadings support WA exports
London, 20 May (Argus) — Iron ore shipments by the four largest producers in Western Australia (WA) rose in the week to 18 May on the back of a rebound of Roy Hill's volumes as the company completed routine quarterly maintenance. Rio Tinto's shipments ticked up too despite a derailment on its rail line. The four largest Pilbara iron ore producers — BHP, Fortescue, Rio Tinto and Roy Hill — loaded vessels with a combined capacity of 17.10mn dwt, up from 16.63mn dwt in the week to 11 May. The dwt capacity is the maximum capacity of a vessel and overestimates actual shipments by about 5pc. Rio Tinto's shipments reached 6.14mn dwt from 5.81mn dwt the previous week. This is below the 2024 average of 6.44mn dwt.There was a derailment on the rail line heading to Rio Tinto's Dampier facilities last Monday. "We have reopened our dual train line 80km from Karratha following a rail incident on Monday, with the first train travelling on one of the repaired lines on Friday and the second line reopening on Saturday," the company said. Roy Hill's exports jumped to 795,000 dwt from 208,000 dwt the previous week as the company appears to have completed its quarterly maintenance. But the volumes remain below the average of 1.25mn dwt. BHP's volumes ticked down to 5.88mn dwt from 6.22mn dwt the previous week. Fortescue's iron ore loadings edged lower to 4.29mn dwt but were still well above the rolling average of 3.74mn dwt. Overall iron ore shipments from WA increased to 48.95mn dwt during the 1-19 May period from 47.81mn dwt in the same period last year, provisional shipping data indicate. Shipments to China rose to 42.27mn dwt from 39.51mn dwt across the same timeframe. Spot freight costs have stepped down in recent weeks as demand has decreased. Capesize freight rates — for loading on 4-7 June — on the bellwether WA to north China route fell to $10.40/t today from the most recent peak of $11.95/t on 8 May. By Andrey Telegin Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more